Library

Code set from IAPMO explaining plumbing standards. 2012 Publication.

Code set from IAPMO explaining plumbing standards. 2015 publication.

Code set from IAPMO explaining plumbing standards. 2018 publication.

Report telling consumers the risks of radon, how radon gets into a home, and steps consumers can take to reduce radon exposure in their homes.

Standards book discussing the minimum standards of total system balance of HVAC systems.

Standard covering equipment sizing loads for single-family-detached homes, small multi-unit structures, condo­miniums, town houses and manufactured homes.

Technical manual from ACCA outlining correct methods for zoning of residential HVAC systems.

American Cleaning Institute website homepage.

Report analyzing design heating load sizing methods for superinsulated homes in cold climates and comparing them to the actual energy usage to determine if the building load calculation methodology should be changed for calculating the design heating load of these homes.

Code establishing the rules of safety relating only to pressure integrity for the design, fabrication, and inspection of boilers and pressure vessels during construction which was published in the year 2017 and is available to order at the referenced link.

Code establishing the rules of safety relating only to pressure integrity for the design, fabrication, and inspection of boilers and pressure vessels during construction which was published in the year 2021 and is available to order at the referenced link.

Information sheet about soil gas control strategies for foundations.

Document detailing how to build radon-resistant homes.

Training manual on how to locate ducts within conditioned space and compact design.

Report describing strategies to improve the aging steam heating systems in New York City to improve energy efficiency, reduce oil and gas usage, and cut maintenance costs.

Report telling consumers how radon gets into a home and how to reduce radon entry into a home.

Website providing lists of WaterSense-qualified products for home plumbing and irrigation equipment that meet the requirements of the U.S. Environmental Protection Agency’s (EPA’s) WaterSense program.

Report outlining the issues with using existing ducts with a new low-load HVAC system, which reduces throw at supply registers causing decreased mixing of supply and room air, leading to potential thermal comfort complaints.

Homeowner guidance from EPA, FEMA, HUD, and NIH on dealing with radon following a natural disaster.

Correcting pressure imbalances in your HVAC system can result in a healthier, more efficient home.

Central return designs require an open pathway between the room and the heart of the house where the return grill is located.

Website providing the technical specifications and related documents for home builders, subcontractors, architects, and other housing professionals interested in certifying a home to the EPA's Indoor airPLUS program requirements.

EPA’s 2008 Lead-Based Paint Renovation, Repair and Painting (RRP) Rule (as amended in 2010 and 2011), aims to protect the public from lead-based paint hazards associated with renovation, repair and painting activities.

Standard technical manual with information about HVAC balancing, testing air and hydronic systems.

The purpose of this map is to assist national, state and local organizations to target their resources and to implement radon-resistant building codes.

Report covering the fundamental waterproofing strategies for tub and shower assemblies.

Website explaining the risks associated with radon in homes and how to protect homes against radon.

Standard providing information on contractors who offer radon control services to homeowners.

Website with information about radon-resistant construction techniques and other radon resources for builders, contractors and homebuyers.

Worker guidance from EPA, HUD, NIH, and OSHA for radon issues following a natural disaster.

Resource to help builders better understand the WaterSense requirements for labeled homes and assist them in meeting the criteria so they can receive the label for their new construction.

Standard describing methods for installing radon mitigation systems in existing residential buildings three stories or less in height which was published in the year 2021 and is available for preview and purchase at the reference link.

ASTM designation regarding two radon control options for low-rise residential building construction. This standard was produced in the year 2008, and is available for preview and purchase at the reference link.

Resource manual for builders, designers, architects, plumbers, and others interested in the WaterSense Labeled Homes Program providing an overview of the program, explains how to meet the program requirements, gives descriptions of water-saving technologies, and provides links to further resources.

Webpage describing the standards, seminars, exams, etc regarding testing, adjusting and balancing (TAB).

Article about installing balanced ventilation systems.

Report on a project conducted to better understand the current usage of thermostatic radiator valves by key market players in steam and hot water heating and to conduct limited experiments on the effectiveness of new and old thermostatic radiator valves as a means of controlling space temperatures...

EPA WaterSense guidance on urinals.

ENERGY STAR overview on certified ventilation fans.

Resource that provides a directory of individuals that have successfully completed all requirements of at least one WaterSense Approved Certification Method (WACM) through a Home Certification Organization (HCO).

Website providing a searchable list of products that meet the EPA WaterSense criteria for water savings.

Specification of criteria for lavatory faucets and faucet accessories under the U.S. EPA WaterSense Program.

Webpage from U.S. Environmental Protection Agency describing the EPA WaterSense program including the Mandatory Checklist for WaterSense Labeled Homes, information on how to get certified, and information on finding or becoming a WaterSense Home Certifying Organization.

Web page providing links or specifications for homes to be labeled through the U.S. Environmental Protection Agency’s (EPA’s) WaterSense program.

Webpage describing the home certification organization, 24/7 Certifications and their requirements for whole house water management in a checklist format.

Fact sheet describing the home certification program CHEERS and its requirements for whole house water management in a checklist format.

Webpage describing the home certification program, Home Innovation Research Labs' requirements for whole house water management.

Fact sheet outlining requirements for WaterSense labeled bathroom sink faucets, detailing their water-efficient features, compliance with flow rate standards, testing, construction, and verification.

Fact sheet describing protocols for detecting, addressing, and preventing water leaks in homes, covering pressure-loss testing, visual inspections, and specific leak tests for fixtures and appliances.

Fact sheet describing how to effectively build, implement, and verify leak detection and flow monitoring systems, detailing appropriate devices, installation procedures, and verification protocols.