Library

Standards book discussing the minimum standards of total system balance of HVAC systems.

Energy Star web page providing guidance on attic ventilation.

Standard covering equipment sizing loads for single-family-detached homes, small multi-unit structures, condo­miniums, town houses and manufactured homes.

Technical manual from ACCA outlining correct methods for zoning of residential HVAC systems.

Report analyzing design heating load sizing methods for superinsulated homes in cold climates and comparing them to the actual energy usage to determine if the building load calculation methodology should be changed for calculating the design heating load of these homes.

Technical article describing issues and moisture concerns related to weatherization efforts.

Article describing the building science implications of insulating vented or unvented attics.

Article describing the research into insulating vented versus unvented attics.

Code establishing the rules of safety relating only to pressure integrity for the design, fabrication, and inspection of boilers and pressure vessels during construction which was published in the year 2017 and is available to order at the referenced link.

Code establishing the rules of safety relating only to pressure integrity for the design, fabrication, and inspection of boilers and pressure vessels during construction which was published in the year 2021 and is available to order at the referenced link.

Training manual on how to locate ducts within conditioned space and compact design.

Reference investigating the strategy of using buried and/or encapsulated ducts to reduce duct thermal losses in residential buildings.

Report describing strategies to improve the aging steam heating systems in New York City to improve energy efficiency, reduce oil and gas usage, and cut maintenance costs.

Report on heating and cooling air-distribution ducts that are insulated, installed close to the ceiling in a vented attic and covered with attic insulation to minimize energy loss.

Article describing the difference between conditioned or unvented attics and unconditioned or vented attics.

Report outlining the issues with using existing ducts with a new low-load HVAC system, which reduces throw at supply registers causing decreased mixing of supply and room air, leading to potential thermal comfort complaints.

Webpage providing details of an experimental earth tube installation at the Clean Energy Exhibition in Georgia.

Report to understand the long-term moisture performance of unvented roof assemblies with fibrous insulation.

A guide for designers, architects, engineers, and fire experts on how to design rainscreen and ventilated cavities such that they don’t contribute to the spread of a fire.

Correcting pressure imbalances in your HVAC system can result in a healthier, more efficient home.

Website providing an online directory of more than 3,600 residential ventilation products lisiting flowrates, sones, watts, and other performance metrics; all listed products have been tested by the Home Ventilating Institute.

Central return designs require an open pathway between the room and the heart of the house where the return grill is located.

Standard technical manual with information about HVAC balancing, testing air and hydronic systems.

Article describing methods for insulating and air sealing vented and unvented roofs in various climates zones.

Q&A article discussing how to address moisture issues in an attic in a wet and humid coastal climate.

Webpage describing the standards, seminars, exams, etc regarding testing, adjusting and balancing (TAB).

Article about installing balanced ventilation systems.

Report on a project conducted to better understand the current usage of thermostatic radiator valves by key market players in steam and hot water heating and to conduct limited experiments on the effectiveness of new and old thermostatic radiator valves as a means of controlling space temperatures...

Article discussing the risks that can occur from undercutting bedroom doors to provide return airflow from bedrooms, as well as corrective measures that can be taken to address these risks.

Web article describing the defining characteristics of the CW and AW window performance classes.