Library

Report providing builders in marine climates with guidance for building homes that have whole-house energy savings of 40% over the Building America benchmark with no added overall costs for consumers.

Standards book discussing the minimum standards of total system balance of HVAC systems.

Document describing three methods for elevating a home out of the flood zone.

Webpage listing ACCA Manual J and D calculation software that is approved by ACCA.

Standard covering equipment sizing loads for single-family-detached homes, small multi-unit structures, condo­miniums, town houses and manufactured homes.

Technical manual from ACCA outlining correct methods for zoning of residential HVAC systems.

Report analyzing design heating load sizing methods for superinsulated homes in cold climates and comparing them to the actual energy usage to determine if the building load calculation methodology should be changed for calculating the design heating load of these homes.

Report assessing the accuracy of HEST as it was being developed and to provide information useful to DOE program managers and HEST development team at Lawrence Berkeley National Laboratory.

This Best Practices Manual is the product of Hammer & Hand’s ongoing work to document and internally codify our standard operating procedures for construction practice.

Code establishing the rules of safety relating only to pressure integrity for the design, fabrication, and inspection of boilers and pressure vessels during construction which was published in the year 2017 and is available to order at the referenced link.

Code establishing the rules of safety relating only to pressure integrity for the design, fabrication, and inspection of boilers and pressure vessels during construction which was published in the year 2021 and is available to order at the referenced link.

Document providing guidance to U.S. home builders who want to accept the challenge.

Guide describing measures that builders in the cold and very cold climates can take to build homes that have whole-house energy savings of 40% over the Building America benchmark with no added overall costs for consumers.

Guidance document providing BA research teams and partners with specific information and approaches to identifying and overcoming potential barriers to Building America (BA) innovations arising in and/or stemming from codes, standards, and rating methods.

Report summarizing research results for the 30% energy savings level and demonstrates that lead builders can successfully provide 30% homes in the Marine Climate Region on a cost-neutral basis.

Document detailing how to build radon-resistant homes.

Training manual on how to locate ducts within conditioned space and compact design.

Report describing strategies to improve the aging steam heating systems in New York City to improve energy efficiency, reduce oil and gas usage, and cut maintenance costs.

Report outlining the steps developers can take to create high-performance standards on a community-wide scale.

Part of a larger LBNL report (Deep Energy Retrofit Guidance for the Building America Solutions Center), the Design and Construction Process chapter provides detailed guidance for each process phase: pre-planning, planning, construction, test-out and post-occupancy.

Part of a larger LBNL report (Deep Energy Retrofit Guidance for the Building America Solutions Center), the Lessons Learned chapter focuses on successful deep energy retrofit projects throughout the U.S.

Part of a larger LBNL report (Deep Energy Retrofit Guidance for the Building America Solutions Center), the Occupant Behavior chapter discusses how to assess homeowner behavior patterns and use these patterns to enhance overall energy savings.

Part of a larger LBNL report (Deep Energy Retrofit Guidance for the Building America Solutions Center), the Reducing costs and Increasing Cost-Effectiveness chapter provides suggestions for controlling deep retrofit costs, including both 'do's' and 'don'ts'.

Report outlining the issues with using existing ducts with a new low-load HVAC system, which reduces throw at supply registers causing decreased mixing of supply and room air, leading to potential thermal comfort complaints.

Online calculator for estimating payback of adding additional insulation to your house.

Website blog with guidance about calculating heat-loss.

Factsheet describing how HEScore, a tool used for energy modeling, rates home energy performance based on physical assets and makes recommendations for improvement.

Correcting pressure imbalances in your HVAC system can result in a healthier, more efficient home.

Central return designs require an open pathway between the room and the heart of the house where the return grill is located.

Standard technical manual with information about HVAC balancing, testing air and hydronic systems.

Article describing the flashing of roofs and what to look for, targeted at home inspectors.

Article describing mulching with lawn clippings.

Report discussing development of scopes of work and quality management for builders in mixed-humid climates.

Report investigating what motivates remodelers to become energy-focused and what technical knowledge that need to be energy-focused.

Report presenting ways public housing authorities (PHAs) can develop packages of energy efficiency retrofit measures the PHAs can cost-effectively implement with their own staff in the normal course of housing operations at the time when units are refurbished between occupancies.

Report designed to help a builder understand quality management and its role in transitioning from conventional to HPH building and remodeling.

Webpage describing the Quality Install Tool, an open-source web app designed to simplify, standardize, and expedite the creation of high-quality installation documentation for HVAC installations and efficiency upgrades.

A free tool used to calculate the required minimum flow rate of dwelling-unit ventilation.

Software enabling low-carbon planning, implementation, monitoring and reporting.

A CD guide intended to help communities mitigate damage or loss from tornadoes and other extremewind events, and provide public information resources for conveying the importance of safe room construction.

Tool determining the most economical and efficient photovoltaic array location and position.

Manual describing the installation process for Craneboard insulated vinyl siding; while installation is similar across insulated vinyl siding products, see manufacturers for specific guidance.

Handheld solar site analysis tool capturing whole-horizon images for a site and generating shading analysis reports.

Research study providing a comparison of selected retrofit activity typically done, versus that same retrofit activity approached from an integrated high performance remodeling and quality management perspective.

Webpage describing the standards, seminars, exams, etc regarding testing, adjusting and balancing (TAB).

Fact sheet poster describing a DOE tool that walks homeowners through a series of simple questions to produce a list of retrofit recommendations to improve the energy efficiency, indoor air quality, and durability of the homeowners’ home, while also lowering their carbon footprint.

Article about installing balanced ventilation systems.

Report on a project conducted to better understand the current usage of thermostatic radiator valves by key market players in steam and hot water heating and to conduct limited experiments on the effectiveness of new and old thermostatic radiator valves as a means of controlling space temperatures...

Article describing water leak detection and modes of testing (video camera inspection, hydrostatic pressure, electronic listening, isolation, and digital testing).

This text is one of series of supporting documents that provide guidance on implementing the World Health Organization (WHO) Guidelines for drinking-water quality; intended to support improvement of water safety within buildings.