Library

Article describing vapor retarder requirements in the International Residential Code and International Building Code 2021.

Guide providing information for homeowners and renters on how to clean up residential mold problems and how to prevent mold growth.

Report telling consumers the risks of radon, how radon gets into a home, and steps consumers can take to reduce radon exposure in their homes.

Article describing methods for venting a vented attic and a roof assembly over an unvented attic.

Information sheet about unvented fireplaces and combustion safety.

Standards book discussing the minimum standards of total system balance of HVAC systems.

Standard covering equipment sizing loads for single-family-detached homes, small multi-unit structures, condo­miniums, town houses and manufactured homes.

Technical manual from ACCA outlining correct methods for zoning of residential HVAC systems.

Standard providing nationally recognized, manufacturer-endorsed set of inspection tasks for HVAC maintenance.

Report examining the structural properties and applications of an innovative studless building system, detailing its testing regime and providing an engineering guide for architects and engineers.

Fact sheet poster describing how to add exterior, continuous, rigid insulation to the exterior walls when replacing siding on an existing home.

Report on the design and evaluation of extended plate and beam.

Case study on the design and evaluation of extended plate and beam, located in Mount Joy Pennsylvania.

Document reporting results from a study done to evaluate effects of automotive emissions from attached garages on the indoor environment.

Case study examining the problem of unwanted air transfer from garage to living space and the effectiveness of garage exhaust ventilation or house supply ventilation to provide a solution to that.

Website describing indoor air quality, and common indoor pollutants and how to reduce exposure to them.

Website describing archived program inforamtion for the Air Sensors International Conference, hosted by the University of California, Davis.

Article about different types of weather resistant barrier.

American Cleaning Institute website homepage.

Standard detailing the specific requirements for all face, back, and inner ply grades as well as formaldehyde emissions, moisture content, tolerances, sanding, and grade marking which was published in 2020, can be acquired through a subscription with the ANSI webstore.

Updated detailed information about Formaldehyde.

Report analyzing design heating load sizing methods for superinsulated homes in cold climates and comparing them to the actual energy usage to determine if the building load calculation methodology should be changed for calculating the design heating load of these homes.

Report explaining how to develop, practice, and maintain emergency plans that reflect what must be done before, during, and after a disaster to protect people and their property.

Guidance from HUD, EPA, NIH, and FEMA for workers who deal directly with asbestos.

Document describing recent discussions on indoor carbon dioxide (CO 2) levels.

Technical fact sheet describing ways to construct asphalt shingle roofs to be more resistant to high winds and hurricanes; also published in FEMA P-499 “Home Builder’s Guide to Coastal Construction: Technical Fact Sheet Series.”

Report describing information for builders and retrofitters about eliminating hazards and coincidental energy losses that come from attached garages.

Code establishing the rules of safety relating only to pressure integrity for the design, fabrication, and inspection of boilers and pressure vessels during construction which was published in the year 2017 and is available to order at the referenced link.

Code establishing the rules of safety relating only to pressure integrity for the design, fabrication, and inspection of boilers and pressure vessels during construction which was published in the year 2021 and is available to order at the referenced link.

Information sheet about sealing combustion appliances to ensure good indoor air quality.

Web based tool providing decision-making guidance for selecting wall assembly components.

Expert meeting focusing on identifying gaps and barriers in combustion safety that need to be addressed by future research, and to develop data-driven technical recommendations for code updates so that a common approach for combustion safety can be adopted by all members of the building energy...

Article describing the control layers (air, thermal, and vapor barriers) needed to build homes successfully in very cold locations.

Training manual on how to locate ducts within conditioned space and compact design.

Source for information about Carbon Monoxide including health effects and measures to reduce exposure.

This is a guide for establishing smoke-free policies in public housing and multifamily properties.

Information sheet discussing how OSB will define the future of the structural sheathing market. OSB will define the future of the structural sheathing market. - See more at: http://bct.eco.umass.edu/publications/by-title/choosing-between-oriented-strandboard-and-plywood/#sthash.RilEtDpl.dpuf

Article describing correct ways to attach rigid insulation to the exterior of commercial and residential buildings.

Report describing strategies to improve the aging steam heating systems in New York City to improve energy efficiency, reduce oil and gas usage, and cut maintenance costs.

Information sheet summarizing inspection and testing of combustion appliances taught during the 2006 Florida whole-house weatherization training as part of the U.S. Department of Energy’s Hot Climate Initiative.

A website explaining how to properly dispose of old refrigeration and air-conditioning equipment.

Brochure helping homeowners identify hazards, work with contractors to remove the hazards, help ensure the work is done properly, and educate when they can return safely to the home.

Report telling consumers how radon gets into a home and how to reduce radon entry into a home.

Document presenting step-by-step process for installing rigid insulating sheathing over wood studs or house wrap.

Technical bulletin addressing surfacing options in regards to composite wood panels and their emission barrier capabilities.

Article describing the causes of wood decay and moisture issues.

Report outlining the issues with using existing ducts with a new low-load HVAC system, which reduces throw at supply registers causing decreased mixing of supply and room air, leading to potential thermal comfort complaints.

This publication provides a set of best practices for improving indoor air quality in conjunction with energy upgrade work in homes.

Website providing information on preparing to stay or go, shelter-in-place procedures, and additional resources.