Library

Report providing builders in marine climates with guidance for building homes that have whole-house energy savings of 40% over the Building America benchmark with no added overall costs for consumers.

Standards book discussing the minimum standards of total system balance of HVAC systems.

Document describing three methods for elevating a home out of the flood zone.

Standard covering equipment sizing loads for single-family-detached homes, small multi-unit structures, condo­miniums, town houses and manufactured homes.

Technical manual from ACCA outlining correct methods for zoning of residential HVAC systems.

Article describing recessed lighting, which if installed incorrectly may contribute to air leakage and compromise building envelope efficiency.

Report analyzing design heating load sizing methods for superinsulated homes in cold climates and comparing them to the actual energy usage to determine if the building load calculation methodology should be changed for calculating the design heating load of these homes.

This Best Practices Manual is the product of Hammer & Hand’s ongoing work to document and internally codify our standard operating procedures for construction practice.

Code establishing the rules of safety relating only to pressure integrity for the design, fabrication, and inspection of boilers and pressure vessels during construction which was published in the year 2017 and is available to order at the referenced link.

Code establishing the rules of safety relating only to pressure integrity for the design, fabrication, and inspection of boilers and pressure vessels during construction which was published in the year 2021 and is available to order at the referenced link.

Document providing guidance to U.S. home builders who want to accept the challenge.

Guide describing measures that builders in the cold and very cold climates can take to build homes that have whole-house energy savings of 40% over the Building America benchmark with no added overall costs for consumers.

Guidance document providing BA research teams and partners with specific information and approaches to identifying and overcoming potential barriers to Building America (BA) innovations arising in and/or stemming from codes, standards, and rating methods.

Report summarizing research results for the 30% energy savings level and demonstrates that lead builders can successfully provide 30% homes in the Marine Climate Region on a cost-neutral basis.

Document detailing how to build radon-resistant homes.

Training manual on how to locate ducts within conditioned space and compact design.

ENRGY STAR webpage discussing the basics of certified ceiling fans.

Article describing customer tip sheet and how ceiling fans are one of the most popular and generally well regarded of all home energy efficiency features.

Website that describes two ceiling fan types and their respective ENERGY STAR eligible product types.

Information sheet with information about insulating and ventilating attics.

Report describing strategies to improve the aging steam heating systems in New York City to improve energy efficiency, reduce oil and gas usage, and cut maintenance costs.

Report outlining the steps developers can take to create high-performance standards on a community-wide scale.

Article describing strategies for reducing the risk of ice dam formation on roofs in winter.

Part of a larger LBNL report (Deep Energy Retrofit Guidance for the Building America Solutions Center), the Design and Construction Process chapter provides detailed guidance for each process phase: pre-planning, planning, construction, test-out and post-occupancy.

Part of a larger LBNL report (Deep Energy Retrofit Guidance for the Building America Solutions Center), the Lessons Learned chapter focuses on successful deep energy retrofit projects throughout the U.S.

Part of a larger LBNL report (Deep Energy Retrofit Guidance for the Building America Solutions Center), the Occupant Behavior chapter discusses how to assess homeowner behavior patterns and use these patterns to enhance overall energy savings.

Part of a larger LBNL report (Deep Energy Retrofit Guidance for the Building America Solutions Center), the Reducing costs and Increasing Cost-Effectiveness chapter provides suggestions for controlling deep retrofit costs, including both 'do's' and 'don'ts'.

Report outlining the issues with using existing ducts with a new low-load HVAC system, which reduces throw at supply registers causing decreased mixing of supply and room air, leading to potential thermal comfort complaints.

Website describing analyses for products and standards affecting home heating, cooling, and appliances, in regards to technical, economical, and energy efficiency pathways.

Website providing consumer information about ceiling fans, including specifications and buying guidance.

The FPC Monitoring project has evaluated radiant barrier systems (RBS) as a new potential DSM program.

Guide describing retrofit procedures for gable end roofs.

Website providing information about the Gossamer Wind Series Ceiling fans, conceived by Danny Parker at the Florida Solar Energy Center as a means of realizing the energy efficiency and comfort potential of ceiling fans.

Article describing the causes that form ice dams, as well as solutions for preventing future ice dams on roofs, focusing on air sealing to prevent hot air leakage.

Information sheet presenting the correct methods for building an insulated cathedral ceiling.

Information sheet presenting techniques for installing cellulose insulation.

Website blog with guidance about calculating heat-loss.

Correcting pressure imbalances in your HVAC system can result in a healthier, more efficient home.

Article outlining the casuses and solutions for ice dam problems.

Central return designs require an open pathway between the room and the heart of the house where the return grill is located.

Article discussing the downside to recessed can lights.

Standard technical manual with information about HVAC balancing, testing air and hydronic systems.

Article describing the flashing of roofs and what to look for, targeted at home inspectors.

Conference paper making the case that moving ducts to conditioned space saves energy, is practical for production builders (when accompanied by careful pre-planning), and creates significant andmarketable energy savings for homebuyers.

Article describing mulching with lawn clippings.

Report discussing development of scopes of work and quality management for builders in mixed-humid climates.

Report investigating what motivates remodelers to become energy-focused and what technical knowledge that need to be energy-focused.

Report presenting the results of a study evaluating retrofit solutions for addressing the effects of wind washing on homes.

Report presenting ways public housing authorities (PHAs) can develop packages of energy efficiency retrofit measures the PHAs can cost-effectively implement with their own staff in the normal course of housing operations at the time when units are refurbished between occupancies.

Report designed to help a builder understand quality management and its role in transitioning from conventional to HPH building and remodeling.