Library

Report providing builders in the hot-dry and mixed-dry climates with guidance for building homes that have whole-house energy savings of 40% over the Building America benchmark with no added overall costs for consumers.

Report covering moisture and leakage issues associated with spray foam insulation application to the underside of roof sheathing.

Report about a project that examines implementation of advanced retrofit measures in the context of a large-scale weatherization program and the archetypal Chicago, Illinois, brick bungalow.

This report outlines research activities that are expected to facilitate the adoption of energy retrofits by remodeling contractors and roofing contractors using retrofit panels which applicable to many existing house designs in most climates and markets.

Report on heating and cooling air-distribution ducts that are insulated, installed close to the ceiling in a vented attic and covered with attic insulation to minimize energy loss.

Study describing efforts and outcomes in developing color-pigmented roofing products with coatings to increase solar reflectance.

Report exploring alternative methods to find long-term solutions to energy loss in 1 ½-story homes to save energy, improve comfort, prevent frost buildup on the underside of the roof deck, and reduce the risk of ice dam formation/reformation.

Report of a field evaluation of four novel roof designs to see how each design would reduce space-conditioned energy use so that the knowledge gained could be applied to the design of new manufactured homes.

Report describing research about a test implementation of an unvented tile roof assembly in a hot-humid climate.

Report to understand the long-term moisture performance of unvented roof assemblies with fibrous insulation.

Brochure on specifications for PV systems.

Best Practices document providing an introduction to current photovoltaic and solar thermal building practices.

Article explaining installing cavity insulation.

Research study describing field testing performed in 32 two-story Florida homes to characterize wind washing failures of the house air and thermal boundary.

Guideline describing the importance of the different types of multifamily building attics and their unique challenges, and outlines strategies and materials used in air-sealing them.

This Measure Guideline provides design and construction information for a deep energy enclosure retrofit solution of a flat roof assembly.

Guideline describing information and specifications relevant to air-seal existing attics.

Report providing extensive guidance on controlling moisture in building envelopes through proper selection and installation on air, water, thermal, and vapor barriers.

Report on the use of vapor diffusion ports to reduce moisture issues with buried ductwork in unvented attics in hot-humid climates.

Report highlighting the evaluation methods used and extent of wind washing found in a study analyzing wind washing in thirty-two two-story homes.

Case study describing the External Thermal and Moisture Management System developed by the NorthernSTAR Building America Partnership for retrofitting roofs with rigid foam over the roof deck, especially on one and a half-story homes.

This page provides important information on how to protect yourself and your family if you suspect that you might have vermiculite insulation from Libby, Montana.

Fact sheet describing analysis of potential heating and cooling savings from radiant barriers in attics.

Report describing the costs, benefits, and challenges of attic insulation retrofits in HUD-code manufactured homes.

Report covering non-combustible continuous exterior insulation and non-combustible roof venting.