Library

Webpage describing how to elevate major appliances in case of a flood.

Table calculating friction losses for PVC pipe by length.

Fact sheet describing design and construction practices to reduce the likelihood of water intrusion in walls and foundations in residential construction.

Document covering basic moisture control principles in the design of above-grade building enclosures; driving rain as a moisture load on walls; a classification system of the various rain control strategies available for walls; and good design practises for walls.

Report covering the performance of residential buildings during three hurricanes impacting Florida in 2004.

Illustrations of range tip-over outcomes with and without door locking mechanism.

Document with important building science considerations, designed for members of the residential construction and remodeling industries, as well as owners and managers who work in affordable housing.

Report describing steps homeowners can take to improve the indoor air quality in their home, including ventilating, preventing pests, and reducing pollutants in the home.

Information sheet designed for the residential construction and remodeling industries, as well as owners and managers working in affordable housing. This sheet presents building guidance for both new construction and rehabilitation, as well as practices that can be used by property maintenance...

Report from FEMA on how to reduce damage from localized flooding including planning, drainage, building codes and retrofits, and regulations.

Research project aimed to verify whether homes in the New Jersey HPwES program achieved 30% source energy savings, and if so, what measures were implemented to achieve them.

An EPA guide describing the causes and impacts of summertime urban heat islands, promoting strategies for lowering temperatures in U.S. communities.

Webpage by the Department of Energy describing how to adjust refrigerator temperature settings to store food and drinks safely, keep food from spoiling, prevent illness from the growth of bacteria, and reduce food waste.

When it comes to protecting yourself and your family from foodborne illness, one of your most effective tools is the kitchen refrigerator.

The ENERGY STAR criteria for refrigerators, refrigerator-freezers, and freezers.

Website describing the RELi rating system and leadership standard that takes a holistic approach to resilient design.

Technical bulletin describing National Flood Insurance Program (NFIP) requirements for flood openings in foundation walls and walls of enclosures below elevated buildings.

Report identifying efficient, connected, smart, and flexible GEB technologies and their future potential, including barriers and opportunities, recommendations for policymakers, and research needs.

Resource that differentiates products in the marketplace that meet WaterSense requirements.

Resource to help builders better understand the WaterSense requirements for labeled homes and assist them in meeting the criteria so they can receive the label for their new construction.

EPA guide on responsible appliance disposal for consumers.

Report summarizing the results of laboratory testing of 20 advanced power strip products.

A quick-reference guide advising homeowners on how to anchor home appliances and protect from seismic damages.

A quick-reference guide advising homeowners on how to elevate and protect outdoor HVAC equipment from high winds and floods.

A retrofit sheet providing information on elevating and securing water heaters to protect against damage during a flood.

Factsheet providing homeowners with an overview of approaches for flashing and sealing roof penetrations to help discussion with a roofing contractor.

This project analyzed combined condensing water heaters or boilers and hydronic air coils to provide high efficiency domestic hot water (DHW) and forced air space heating. Called "combi" systems, they provided similar space and water heating performance less expensively than installing two...

Article from the Institute of Biological Engineering describing reverse osmosis water softeners.

This report discusses proposed updates to the pool pumps and motors, and portable electric spas standards in the Appliance Efficiency Regulations (California Code of Regulations, Title 20, Sections 1601 to 1609). These proposed updates are part of the 2012 Appliance Efficiency Rulemaking, Phase I...

Report describing how to construct a frost protected shallow foundation (FPSF) as a practical alternative to a deeper, more-costly foundation in cold regions with seasonal ground freezing and the potential for frost heave.

Article explaining the energy cost reduction and other benefits associated with installing a heat pump clothes dryer

Infographic providing details on choosing the right advanced power strip based on your habits to reduce the electricity wasted when your electronic devices are idle.

Report from FEMA describing techniques for floodproofing structures.

Second part of an article series focusing on servicing high efficiency modcon boilers. This part focuses on paperwork and follow-up communication with the homeowner for scheduling annual maintenance.

Article describing the author's experiences in owning and servicing a modcon boiler.

A website providing information on how to properly size a water heater based on tank size, volume, peak hour demand and other factors.

How hard can it be to insulate a flat sheet of concrete? I mean you only have three choices – on the top, on the bottom, or on the edge. OK, you might have some combination of the three as well.

Report describing a comparison of hydrothermal performances of DryRightTM fiberglass batts and kraft-faced fiberglass batts in a south facing wall assembly with a moisture storage cladding material.

Website describing how solar water heaters -- also called solar domestic hot water systems -- can be a cost-effective way to generate hot water for your home.

Specification describing criteria for manufactured polymeric materials used to provide a rainscreen function, a means for the drainage of liquid moisture and the ventilation of vapor moisture that enters an above-grade exterior wall assembly which was published in the year 2019, and is available for...

Bill requiring the Consumer Product Safety Commission to revise the safety standards for freestanding clothing storage units such as a dressers, bureaus, or chests of drawers to include testing related to tip overs and new warning requirements for all such products entering the U.S. market; passed...

Document providing information on correct storage techniques for lumber to manage moisture.

Document describing correct construction of swales, designed to trap particulate pollutants (suspended solids and trace metals), promote infiltration, and reduce the flow velocity of storm water runoff.

Article describing ways to protect roofs from water infiltration by using self-adhering underlayment in vulnerable locations such as roof valleys, eave edges (to help deal with ice dams), rake edges, roofs to vertical walls (such as dormers), sidewall protection, the bottom of dormer valleys, and...

Document describing issues of wind pressure resistance in walls with exterior rigid foam sheathing installed directly over framing members.

Resource manual for builders, designers, architects, plumbers, and others interested in the WaterSense Labeled Homes Program providing an overview of the program, explains how to meet the program requirements, gives descriptions of water-saving technologies, and provides links to further resources.

Brochure with information about how to select and install house wrap and other weather-resistive barriers.

Fact sheet describing water management in a residential building.

This TechNote provides an overview of building code requirements and best practices for flashing at window and door frames.

Article describing a research study exploring how effective interior insulation systems are at keeping basements dry and warm.