Library

2009 edition of code establishing a baseline for the design and installation of fuel gas systems and gas fired appliances through performance requirements.

Code set from IAPMO explaining plumbing standards. 2012 Publication.

2015 edition of code establishing a baseline for the design and installation of fuel gas systems and gas fired appliances through performance requirements.

Code set from IAPMO explaining plumbing standards. 2015 publication.

2018 edition of code establishing a baseline for the design and installation of fuel gas systems and gas fired appliances through performance requirements.

2018 edition of code establishing minimum regulations for mechanical systems, including heating, cooling, ventilation, exhaust, ducts, fireplaces, combustion and hydronic systems, using prescriptive and performance-related provisions.

A presentation on the 2020 State Mechanical Code for easier understanding.

Federal statistics about national energy consumption in residential homes in 2020

Guidebook covering basic principles and data used in the HVAC&R industry. This is the 2023 edition of the handbook, which can be purchased physically or digitally at the reference link in versions using either I-P units of measurement or SI units of measurement.

Article describing products that can enhance the efficiency and safety of clothes dryer vents.

Article describing methods for venting a vented attic and a roof assembly over an unvented attic.

Report describing the results of a field study of five different ventilation system types in 29 homes in the Pacific Northwest.

Paper discussing innovative strategies for improving ventilation systems in high-rise apartment buildings, focusing on compartmentalization and controlling stack effect pressures to enhance indoor air quality and energy efficiency published in the Proceedings of the Eighth Conference on Building...

Report describing how changing the air exchange rate of a home (the sum of the infiltration and mechanical ventilation airflow rates) affects the annual thermal conditioning energy.

Information sheet about unvented fireplaces and combustion safety.

Energy Star web page providing guidance on attic ventilation.

The manual covers residential zoning issues - multiple, single-zone, and central multi-zone systems - and includes advice on working with homeowners to adapt the heating or cooling system design to meet modern home design features.

Website providing research, efficiency and safety standards development, and advocacy to the home appliance industry to bring efficient, high-performing home appliances to consumers.

Website reporting efficiencies for dehumidifiers, room air conditioners, and room air cleaners that are tested by independent laboratories and reported by the Association of Home Appliance Manufacturers.

Report providing information regarding the benefits and challenges associated with the installation of earthquake-actuated automatic shut-off valves (ASVs) or remote-control valves (RCVs) to stop the flow of natural gas into buildings in the event of an earthquake or rupture of the gas line.

Report with updated energy consumption data for 28 residential & commercial miscellaneous electric loads (MELs), including projections to 2040.

Safety brochure from the Consumer Product Safety Commission (CPSC) describing the dangers to children of furniture tipping over if it is not securely anchored.

Website providing consumers with information about the risk to children from appliances and furniture tipping over and ways to anchor furniture and appliances to prevent this hazard.

Standard covering updates to the expected leakage rates for ductwork constructed to the SMACNA HVAC Duct Construction Standards—Metal & Flexible, duct leakage test procedures; includes recommendations on use of leakage testing, types of test apparatus, and test setup and sample leakage analysis.

Webpage describing different types of appliance thermometers, how they work, and how they should be used by homeowners.

Report describing a field investigation of failure rates of whole-house mechanical ventilation systems installed in Florida homes.

The exhaust from residential combustion appliances contains air pollutants and high levels of moisture that must be conveyed to the outdoors to maintain acceptable indoor quality.

Technical report describing the evaluation of air management systems in a high-rise apartment building in Toronto, Ontario, focusing on air leakage, suite depressurization, and the performance of in-suite exhaust and corridor ventilation systems.

A basic guide walking through the various types of valves useful in mitigating the effects of earthquakes and other seismic events on natural gas pipelines for residential use.

Standard establishing test methods for determining air leakage in duct systems using fan pressurization in low-rise residential and commercial buildings.

Articles describing attic and ceiling insulation, including mentions of baffles with protect insulation from wind washing.

Web page describing the benefits of attic fans, with rules for sizing fans and intake vents.

Blog article discussing pros and cons of attic ventilation fans.

Article by the Canadian Government on attic ventilation and considerations for moisture and ice dams.

Technical article describing issues and moisture concerns related to weatherization efforts.

Article describing the common ventilation system types, issues, and solutions in New York City's multifamily residential buildings to improve indoor air quality, occupant health, and building durability.

ENRGY STAR webpage discussing the basics of certified ceiling fans.

Information sheet with information about insulating and ventilating attics.

A list of EPA-certified wood-burning appliances for home heating for a range of budgets.

ENERGY STAR clothes dryer buying guidance for consumers.

ENERGY STAR criteria that requires clothes dryers meet this set of efficiency and cycle time requirements using eligibility and energy performance metrics.

ENERGY STAR clothes washers key product criteria eligibility and energy performance metrics.

Information sheet summarizing inspection and testing of combustion appliances taught during the 2006 Florida whole-house weatherization training as part of the U.S. Department of Energy’s Hot Climate Initiative.

Fact sheet that details the steps needed to perform a combustion appliance safety inspection to determine if fossil fuel-fired appliances are operating safely under a depressurized condition.

Article introducing the FTC’s new EnergyGuide label, including estimates of annual energy usage.

A website explaining how to properly dispose of old refrigeration and air-conditioning equipment.

Article describing the use of whole-house fans to provide cooling in the region surrounding Sacramento, CA.

Report providing recommendations to builders regarding how to reduce cooling loads, use air-circulation fans, natural ventilation, window and building design for natural ventilation, and whole-house fans.

Short report providing tips on how to reduce heat gain and passively cool a home.

Standard describing prediction, mitigation, and reduction of moisture damage to the building envelope, materials, components, systems, and furnishings, depending on climate, construction type, and HVAC system operation; the webstore allows preview or full purchase.