Library

2009 edition of code establishing a baseline for the design and installation of fuel gas systems and gas fired appliances through performance requirements.

Fact sheet providing an overview of the FEMA document Wind Retrofit Guide for Residential Buildings.

Code set from IAPMO explaining plumbing standards. 2012 Publication.

Report summarizing the requirements to strenghthen new homes against property damage caused by high wind occurrences per the IBHS Fortified Homes High Wind Standard for New Homes.

Fact sheet summarizing the changes to the flood provisions in the 2012 I-Codes that appear in the 2015 edition.

2015 edition of code establishing a baseline for the design and installation of fuel gas systems and gas fired appliances through performance requirements.

Code set from IAPMO explaining plumbing standards. 2015 publication.

Florida building code including all the amendments and additions by Florida for the wind-borne debris regions and the high-velocity hurricane zone.

2018 edition of code establishing a baseline for the design and installation of fuel gas systems and gas fired appliances through performance requirements.

Report summarizing the requirements for strenghtening and protecting the roof, openings in the house, and creating a continuous load path to strengthen walls and foundation per the IBHS Fortified Homes Hurricane Standard for New Homes.

Guide describing the requirements by FORTIFIED Home™ for improving the home's resistance in severe thunderstorms, straight-line wind events, and high winds at the outer edges of tornadoes.

Guide describing the requirements by FORTIFIED Home™ for improving the home's resistance in severe thunderstorms, straight-line wind events, and high winds at the outer edges of tornadoes.

Federal statistics about national energy consumption in residential homes in 2020

Article describing products that can enhance the efficiency and safety of clothes dryer vents.

Report providing builders in the hot-dry and mixed-dry climates with guidance for building homes that have whole-house energy savings of 40% over the Building America benchmark with no added overall costs for consumers.

Article from the Sierra Club explaining 5 steps to take to ensure your home's resistance to wildfires, including site maintenance and roof construction guidelines.

Article describing methods for venting a vented attic and a roof assembly over an unvented attic.

Guide developed to help contractors, building operators, and city officials successfully adopt cool roof and pavement technology.

Information sheet about unvented fireplaces and combustion safety.

Energy Star web page providing guidance on attic ventilation.

Website providing research, efficiency and safety standards development, and advocacy to the home appliance industry to bring efficient, high-performing home appliances to consumers.

Website reporting efficiencies for dehumidifiers, room air conditioners, and room air cleaners that are tested by independent laboratories and reported by the Association of Home Appliance Manufacturers.

Manual describing best practices or home construction in Alaska and northern climates.

Report providing information regarding the benefits and challenges associated with the installation of earthquake-actuated automatic shut-off valves (ASVs) or remote-control valves (RCVs) to stop the flow of natural gas into buildings in the event of an earthquake or rupture of the gas line.

Report with updated energy consumption data for 28 residential & commercial miscellaneous electric loads (MELs), including projections to 2040.

Safety brochure from the Consumer Product Safety Commission (CPSC) describing the dangers to children of furniture tipping over if it is not securely anchored.

Website providing consumers with information about the risk to children from appliances and furniture tipping over and ways to anchor furniture and appliances to prevent this hazard.

A publication highlighting recommendations that contribute to improved overall performance in the structural shell and focus on good connection details to tie together exterior walls, roofs and floors.

Webpage describing different types of appliance thermometers, how they work, and how they should be used by homeowners.

Webpage providing mapping tool for obtaining ground snow load, based on ASCE 7-10, for any location in the contiguous United States, with the exception of locations requiring a case study due to extreme local variations in ground snow loads. Fee required for some data.

Technical fact sheet describing ways to construct asphalt shingle roofs to be more resistant to high winds and hurricanes; also published in FEMA P-499 “Home Builder’s Guide to Coastal Construction: Technical Fact Sheet Series.”

The exhaust from residential combustion appliances contains air pollutants and high levels of moisture that must be conveyed to the outdoors to maintain acceptable indoor quality.

A basic guide walking through the various types of valves useful in mitigating the effects of earthquakes and other seismic events on natural gas pipelines for residential use.

Report about a project that examines implementation of advanced retrofit measures in the context of a large-scale weatherization program and the archetypal Chicago, Illinois, brick bungalow.

This report outlines research activities that are expected to facilitate the adoption of energy retrofits by remodeling contractors and roofing contractors using retrofit panels which applicable to many existing house designs in most climates and markets.

Technical article describing issues and moisture concerns related to weatherization efforts.

SPFA website signup page to access SPFA documents.

Article from California Earthquake Authority on the benefits of retrofitting homes to withstand earthquake forces, with a focus on foundations, walls, and chimneys.

Report providing water management details for roof assemblies.

Presentation describing details for installing structural insulated panels (SIPs).

Report comparing a variety of roof insulating strategies to present their advantages and disadvantages according to several comparison criteria.

Article describing the control layers (air, thermal, and vapor barriers) needed to build homes successfully in very cold locations.

Document containing recommendations on how to brace roofs and gable end walls based on lessons learned from analyzing the destruction from hurricane Andrew.

An article discussing how different metal roof materials and attachment methods affect the ability of the roof to thermally expand and contract and the durability of different solutions.

News article from SFGate explaining and giving figures on how chimney failure is the most common type of damage to homes during an earthquake.

A list of EPA-certified wood-burning appliances for home heating for a range of budgets.

ENERGY STAR clothes dryer buying guidance for consumers.

ENERGY STAR criteria that requires clothes dryers meet this set of efficiency and cycle time requirements using eligibility and energy performance metrics.

ENERGY STAR clothes washers key product criteria eligibility and energy performance metrics.

Information sheet summarizing inspection and testing of combustion appliances taught during the 2006 Florida whole-house weatherization training as part of the U.S. Department of Energy’s Hot Climate Initiative.