Library

Paper describing vegetation impacts on cooling load for buildings.

Book detailing passive cooling methods including airflow methods, evaporative cooling, and earth cooling.

News article describing the state of the residential battery storage market.

Factsheet with information on energy efficient pool pumps.

If your kitchen has a powerful exhaust fan, it may be pulling air down your chimney or water-heater flue.

Measure Guideline describing how to assess and carry out the isolation of natural draft combustion appliances from the conditioned spaces of low-rise residential buildings.

This measure guideline provides guidance on combustion safety inspection procedures for appliances and heating equipment that use indoor air for combustion and dilution of flue gases in low-rise residential buildings.

Study investigating measured cooling energy savings in homes across the U.S. from the installation of roofing with higher solar reflectance.

Study investigating measured cooling energy savings from the installation of wall finishes with higher solar reflectance.

Paper describing energy savings in space cooling from shading condenser units.

Repor ourlining testing results from a 53 home monitored sample, long-term energy use of electric resistance clothes dryers.

Report describing a lighting and smart power strip retrofit evaluation that was conducted on 56 all-electric, existing Florida homes to see how lighting and miscellaneous electric loads might be reduced.

Technical article presenting the results of an analysis on the effect of insect screens on window solar heat gain coefficients and U-values.

Webpage for the CEC’s Modern Appliance Efficiency Database System

List of appliance brands and models, showing their performance and efficiency as tested by the appropriate standard.

DOE Energy Saver webpage providing a brief summary of natural ventilation for houses.

Webpage presenting updated maps for annual average temperature and precipitation in the contiguous U.S.

Link to the NFPA standards collection; NFPA 211 provides guidelines for construction projects involving chimneys, fireplaces, venting systems, and solid fuel-burning appliances.

Document describing recommended modeling rules, potential compliance credits, and eligibility criteria for residential night ventilation cooling systems for California’s Title 24 energy efficiency standards.

Newsletter providing news and information to members of the New Jersey National Guard.

Article from Smarter Homes NZ on home building techniques that incorporate passive cooling.

Book describing passive cooling techniques from a technical and academic perspective.

This study evaluated 11 measures for passive cooling using four heat resilience metrics with and without grid power in Fresno CA and found the two most effective measures were installing solar-control window films and adding roof insulation; natural ventilation also helped reduce overheating in...

Website providing guidance on passive heating, cooling, and lighting methods.

Article from Williams College on the key elements of passive solar design for homes.

Paper describing a study on savings in peak power and cooling energy for homes with shade trees.

Paper summarizing passive and low-energy cooling systems for buildings.

Brochure describing what permeable pavement is, where to install it, and how to maintain it.

Report providing information on performance of mortars and concrete containing PCMs.

Blog article describing considerations for how to use trees for shading to reduce cooling energy demand.

City of Plymouth webpage providing information on the Plymouth Community Center Project.

Table of criteria for pool pumps to achieve ENERGY STAR certification.

This CASE report proposes updates and revisions to the standards for residential swimming pool filtration pumps, new and replacement single phase pump motors under 5 horsepower (HP), controllers, portable electric spas as well as expanding the scope of the current standards to include light emitting...

Large scale simulation study investigating the effects of cool roofs and walls on buildings of various vintages across the U.S., with special attention given to California.

Database describing FEMA preparedness webinars including natural hazard preparedness.

Report containing data on injuries and fatalities associated with television, furniture, and appliance product instability, or tip-over incidents.

Webpage describing how to elevate major appliances in case of a flood.

Fact sheet describing analysis of potential heating and cooling savings from radiant barriers in attics.

Illustrations of range tip-over outcomes with and without door locking mechanism.

Searchable database of over 3,000 roofing products that have undergone solar reflectance and thermal emittance testing.

Searchable database of wall cladding and coating products that have undergone solar reflectance and thermal emittance testing.

Research project aimed to verify whether homes in the New Jersey HPwES program achieved 30% source energy savings, and if so, what measures were implemented to achieve them.

Guidance document describing urban heat islands, what they are, how they form, why we care, and including some strategies to reduce them.

Webpage by the Department of Energy describing how to adjust refrigerator temperature settings to store food and drinks safely, keep food from spoiling, prevent illness from the growth of bacteria, and reduce food waste.

When it comes to protecting yourself and your family from foodborne illness, one of your most effective tools is the kitchen refrigerator.

The ENERGY STAR criteria for refrigerators, refrigerator-freezers, and freezers.

Website describing the RELi rating system and leadership standard that takes a holistic approach to resilient design.

Report identifying efficient, connected, smart, and flexible GEB technologies and their future potential, including barriers and opportunities, recommendations for policymakers, and research needs.

Report describing a study using parametric computer simulations of 112 single-family and 63 multi-family residential building prototypes to quantify the contributions of building components such as roofs, walls, windows, infiltration, outside air, lighting, equipment, and people to the aggregate...

Resource to help builders better understand the WaterSense requirements for labeled homes and assist them in meeting the criteria so they can receive the label for their new construction.