Library

2009 edition of code establishing a baseline for the design and installation of fuel gas systems and gas fired appliances through performance requirements.

Code set from IAPMO explaining plumbing standards. 2012 Publication.

2015 edition of code establishing a baseline for the design and installation of fuel gas systems and gas fired appliances through performance requirements.

Code set from IAPMO explaining plumbing standards. 2015 publication.

2018 edition of code establishing a baseline for the design and installation of fuel gas systems and gas fired appliances through performance requirements.

Federal statistics about national energy consumption in residential homes in 2020

Article describing vapor retarder requirements in the International Residential Code and International Building Code 2021.

Article describing products that can enhance the efficiency and safety of clothes dryer vents.

Article describing thermal bridging, construction practices that encourage thermal bridging, and solutions.

Guide for homeowners describing how to find and seal basement and attic air leaks, determine if attic insulation is adequate, make improvements safely, and reduce energy bills.

Report describing testing and analysis on deep energy retrofits of existing single-family homes in the U.S.

Article describing methods for thermally isolating a garage in a Passive House-certified multifamily building.

Information sheet about unvented fireplaces and combustion safety.

Technical report describing the SPS (Structural Panel System), an innovative implementation of the "perfect wall" concept, situating environmental control layers on the exterior side of structural components for improved constructability, cost-effectiveness, and performance, validated through the...

Website providing research, efficiency and safety standards development, and advocacy to the home appliance industry to bring efficient, high-performing home appliances to consumers.

Website reporting efficiencies for dehumidifiers, room air conditioners, and room air cleaners that are tested by independent laboratories and reported by the Association of Home Appliance Manufacturers.

Website article interviewing the inventor of the Larsen truss, a history of its use, and a discussion of its advantages and disadvantages.

Article about different types of weather resistant barrier.

Report providing information regarding the benefits and challenges associated with the installation of earthquake-actuated automatic shut-off valves (ASVs) or remote-control valves (RCVs) to stop the flow of natural gas into buildings in the event of an earthquake or rupture of the gas line.

Report with updated energy consumption data for 28 residential & commercial miscellaneous electric loads (MELs), including projections to 2040.

Safety brochure from the Consumer Product Safety Commission (CPSC) describing the dangers to children of furniture tipping over if it is not securely anchored.

Website providing consumers with information about the risk to children from appliances and furniture tipping over and ways to anchor furniture and appliances to prevent this hazard.

Webpage describing different types of appliance thermometers, how they work, and how they should be used by homeowners.

Technical report describing the thermal performance of 40 common building envelope details for mid- and high-rise buildings, including analyses to optimize energy efficiency and reduce thermal bridging.

The exhaust from residential combustion appliances contains air pollutants and high levels of moisture that must be conveyed to the outdoors to maintain acceptable indoor quality.

A basic guide walking through the various types of valves useful in mitigating the effects of earthquakes and other seismic events on natural gas pipelines for residential use.

Article describing the building science implications of insulating vented or unvented attics.

Article describing the research into insulating vented versus unvented attics.

SPFA website signup page to access SPFA documents.

Report describing approaches to insulating basements in homes built to meet Energy Star levels of performance of heat loss reduction.

Information sheet describing techniques for insulating basements.

A book about structurally insulated panels.

Web based tool providing decision-making guidance for selecting wall assembly components.

Article describing the control layers (air, thermal, and vapor barriers) needed to build homes successfully in very cold locations.

Article describing correct ways to eliminate water damage by incorporating a sacrificial layer to foundation walls and footings.

Website of the Cold Climate Housing Research Center.

Information sheet with information about insulating and ventilating attics.

Case study characterizing the framing factors for the exterior walls, ceilings, and floors of 180 wood-framed low-rise residential buildings across the United States.

A list of EPA-certified wood-burning appliances for home heating for a range of budgets.

ENERGY STAR clothes dryer buying guidance for consumers.

ENERGY STAR criteria that requires clothes dryers meet this set of efficiency and cycle time requirements using eligibility and energy performance metrics.

ENERGY STAR clothes washers key product criteria eligibility and energy performance metrics.

Information sheet summarizing inspection and testing of combustion appliances taught during the 2006 Florida whole-house weatherization training as part of the U.S. Department of Energy’s Hot Climate Initiative.

Fact sheet that details the steps needed to perform a combustion appliance safety inspection to determine if fossil fuel-fired appliances are operating safely under a depressurized condition.

Article introducing the FTC’s new EnergyGuide label, including estimates of annual energy usage.

Information guide describing issues with concrete floors, in multiple climate zones.

Report covering insulating crawlspaces.

A website explaining how to properly dispose of old refrigeration and air-conditioning equipment.

Article describing research encouraging use of exterior insulation to warm interior sheathing surfaces in walls and roof assemblies to reduce the likelihood of condensation during cold weather

Article describing the difference between conditioned or unvented attics and unconditioned or vented attics.