Library

Standard specification covering elastomeric cellular preformed gasket and sealing materials. This version of the standard was published in the year 2011 and is available for preview and purchase at the reference link. Other versions of the standard were published in the years 2021, 2015, 2006, and...

Standard specification covering elastomeric cellular preformed gasket and sealing materials. This version of the standard was published in the year 2021 and is available for preview and purchase at the reference link. Other versions of the standard were published in the years 2015, 2011, 2006, and...

Standard specification covering the properties of a cured single- or multicomponent cold-applied elastomeric joint sealant for sealing, caulking, or glazing operations on buildings, plazas, and decks for vehicular or pedestrian use, and types of construction other than highway and airfield pavements...

A specification covering the application of Insulating Concrete Forms (ICFs) that act as permanent formwork for cast-in-place reinforced concrete beams & walls which was published in the year 2022 and is available for preview and purchase at the reference link.

Specification describing criteria for manufactured polymeric materials used to provide a rainscreen function, a means for the drainage of liquid moisture and the ventilation of vapor moisture that enters an above-grade exterior wall assembly which was published in the year 2019, and is available for...

Information sheet about buried ducts.

Website providing information on all types of pest management for multi-family housing.

Report following the evolution of the construction quality process from its development for new homes to its application construction of a HPH with enhanced specifications, and its application in a crawlspace renovation.

Document explaining the benefits of evaluating and identifying energy efficiency retrofit measures that could be made during renovation and maintenance of multifamily buildings.

Document serving as a starting point that features initial tools and resources for teams to start collaborating to continually improve the energy efficiency and durability of new houses.

Report covering coating and back venting wood based claddings and trim.

Conference paper describing testing of the performance of fasteners used to attach rigid foam insulation to the exterior of walls.

Information sheet describing correct application of stucco.

Document describing issues of wind pressure resistance in walls with exterior rigid foam sheathing installed directly over framing members.

Research study determining how well high performance envelope and innovative cooling system interact to cost effectively reduce cooling energy use in this hot-dry climate.

A guide for homeowners on determining the risks from tornadoes and hurricanes and selecting a safe room type and location, as well as providing detailed plans for safe room construction.

A story about bees building a hive in the drainage plane behind the brick veneer siding. The bees entered the wall through unprotected drainage holes.

Image depicting damage from termites in weatherboard cladding.

Projectile missile testing of various wall panel configuration to understand how the different wall constructions would perform when struck with wind driven debris from a hurricane.

Case study of new home construction in the hot-dry and mixed-dry climate zones.

Report providing a strengths, weaknesses, opportunities, and threats (SWOT) analysis inherent to different models as a way of thinking about the transition from traditional business models into a viable model for delivering deep energy retrofits.

Article describing the perfect wall and and in what order to control rain, air, vapor, and heat.

Report about seeking a 30% source energy savings targets over a comparable 2009 International Energy Conservation Code-built home in the cold climate zone, using simple measures.

Report developed for Habitat for Humanity about lessons learned from demonstration retrofit projects undertaken by Habitat for Humanity affiliates in New York, Maryland, and Pennsylvania; with building systems consulting and technical assistance provided by Steven Winter Associates.

Article describing thermal bridging, construction practices that encourage thermal bridging, and solving thermal bridging through continuous exterior insulation.

Research study investigating the thermal efficiency of fasteners, namely drywall screws and siding nails, in high-performance wood-framed walls.

Report proposing a procedure for estimating the whole opaque wall R-value (whole-wall R-value), independent of system type and construction materials.

Article on thermal protectors in recessed light fixtures.

Article describing the evolution of the IRC to permit class 3 vapor retarders (latex paint) in walls coupled with exterior continuous insulation to allow drying and reduce condensation risk.

Research study describing a detailed 3D computational fluid dynamics model that evaluates the thermal performance of uninsulated wall assemblies.

Article describing tips for effectively installing weatherstripping on windows and doors.

Case study about a structural sheathing product composed of enhanced EPS rigid foam with OSB adhered on one side.

Technical conference paper discussing real world experience with Trombe walls.

Information sheet providing definitions, applications, and techniques for applying air barriers.

Information sheet with methods for constructing or retrofitting basements to reduce moisture issues.

Technical fact sheet highlighting important building connections and illustrating the proper use of various types of connection hardware; also published in FEMA P-499 “Home Builder’s Guide to Coastal Construction: Technical Fact Sheet Series.”

Research report that validates Pinhole Insulation®, offering a cost-effective, minimally invasive solution for enhancing insulation and air sealing in enclosed roof cavities, improving R-value by 60% compared to traditional methods.

Report about a project with successful integration of numerous energy-conservation and renewable-energy features into a beautiful, comfortable, and very energy-efficient off-grid home.

Information sheet about proper ventilation and air sealing.

Guide providing information on controlling attic ductwork sweating.

Report summarizing NRELs efforts to develop diagnostic test cases to conduct accurate energy simulations when phase change materials (PCMs) are modeled in residential buildings.

Publication with installation guidance for vinyl siding.

Document describing wall bracing techniques and suggestions for the city of Verona, WI building department.

A guide describing how to do wall bracing calculations and evaluations.

A presentation about the need for rainscreens including the damage water and moisture ingress into a home’s siding and framing can cause, and ways to design a resilient wall that drains and ventilates well.

Article describing the process of adding weatherstripping to and weatherizing old doors.

Webpage describing weatherstrip tips and tricks to properly air seal doors.

Fact sheet describing how weatherstripping can be an easy and cost-effective way to save money on energy costs and improve comfort by reducing drafts.

Article describing an overview of weatherstripping requirements.

An article written by Don Jackson of The Journal of Light Construction on how to detail brick veneer siding wall.