Library

Document providing supplemental information for code enforcement professionals about header hangers in bearing walls.

LBNL webpage introducing heat island effect and cool materials concepts, and providing links to LBNL pages explaining cool pavements, cool roofs, and cool walls.

Case study of new home construction in the hot-dry and mixed-dry climate zones.

Brochure describing advanced framing techniques.

Information sheet about air barriers.

Brochure describing insulation and air-sealing details.

Document providing a roadmap to aid Habitat for Humanity affiliates in building high performing houses by using materials and techniques that are affordable, do not add any maintenance burden, and are volunteer friendly.

Article from NREL on wall construction guidelines for homes in hot climate zones.

Report that considers a number of promising wall systems that can meet the requirement for better thermal control.

Report providing testing methodology to evaluate structural rim header designs over openings up to 6 ft. wide and applicable to one- and two-story homes.

Report with test results that serve as a baseline of data for further material tests of other high-R wall systems and for comparison to whole-house wind pressure testing.

Research study presenting results of an existing home monitoring project designed to measure wall cavity moisture characteristics.

Report covering control of hydrostatic pressure in wall assemblies.

Report providing a collection of fact sheets describing guidance for constructing homes in wildfire zones.

Article describing the causes that form ice dams, as well as solutions for preventing future ice dams on roofs, focusing on air sealing to prevent hot air leakage.

A starting point for ballparking and comparing the cost of different siding materials and a brief overview of the pros and cons of different siding materials.

Article describing the impact of stack effect on building performance, highlighting how pressure differences caused by temperature and height affect air infiltration and exfiltration, and detailing strategies like compartmentalization and distributed mechanical systems to manage airflow and maintain...

Article describing the stack effect in buildings.

A website providing a checklist of important areas to check when sealing holes inside and outside of the home to prevent entry by rodents and other outside pests.

Checklist for verifying FORTIFIED levels and documentation needed.

Report describing ways to retrofit a home to make it more resistant to earthquakes.

Guide discussing observations, recommendations, and technical guidance as a result of Hurricane Katrina

Code describing the requirements for existing site-built single-family homes to receive roof-to-wall retrofits when re-roofing.

Report describing the hurricane retrofit guide with focus on walls and wooded framed walls.

Report detailing the design and construction of 10 new houses under the Wyandotte Neighborhood Stabilization Program 2.

Report exploring four questions to determine the level of risk associated with adding drained exterior insulation to the exterior of an existing home during an energy retrofit.

Report outlining results from a 2005 hygrothermal pilot study in the South.

ICC-ES Evaluation Report reviewing proprietary steel shear wall panels developed by Simpson Strong-Tie Company to resist vertical and lateral loads in walls resulting from wind or earthquakes.

An impact test report from projectile missile tests against brick veneer, verifying that brick veneers perform well to resisting hurricane force wind driven debris.

Guide detailing best practices on how to build wall assemblies with absorptive claddings such as brick, stone that drain and dry well.

Report providing information about techniques and approaches to improve the efficiency of recessed lighting.

This research study used pollutant measurements, home inspections, diagnostic testing and occupant surveys to assess IAQ in 24 new or deeply retrofitted homes designed to be high performance green buildings in California.

A factsheet providing information on how to prevent pests from entering the home by sealing cracks and openings.

Site showing flame spread ratings and definitions for common building materials.

Article explaining installing cavity insulation.

A guide for users and energy raters of insulated siding as home insulation.

Article describing how insulated siding can save homeowners energy by providing continuous exterior insulation.

Report about promoting energy efficiency for Hilton Head Island.

Report covering reservoir claddings, back ventilation and vapor throttles.

Report describing ways to retrofit a home to make it more hurricane resistant.

The purpose for this document is to provide basic guidance on the use of proven installation techniques that can be used by installers to help ensure correct “dense pack” application of JM Spider® in drill & fill applications.

Article describing walls and moisture development on them.

Article describing air leakage in buildings.

Information sheet providing links and resources for insulating basements in cold climates.

Article providing guidance for installing manufactured stone veneer, including information on rainscreens.

Website providing information about Knauf Insulation.

Research study to help development of an application protocol for aerosol sealing of building shells that will eventually be demonstrated on buildings in retrofit and new construction.

Website describing best practices for minimizing exposure to lead while doing repairs and renovations in homes built in 1978 or earlier.

Report examining performance measures in the context of a large-scale renovation project.