Library

Document providing guidance about choosing the correct caulk for a project.

Report on the stability of furring strips as a means for cladding attachment over walls with thick exterior rigid insulation.

Research study investigating the energy performance and cost effectiveness of several state-of-the-art retrofit strategies that could be used in residential houses in the Boston and New England area.

Report outlining how conditioned crawlspaces perform better than vented crawlspaces in terms of safety, health, comfort, durability and energy consumption.

Part I of the Guide addresses walls constructed with 2x6 wood frame studs, wood structural panel (WSP) sheathing as exterior sheathing, gypsum board as interior sheathing, and a cladding system installed over WSP sheathing in low-rise residential buildings up to three stories in height. Walls with...

Part I of the Guide addresses walls constructed with 2x6 wood frame studs, wood structural panel (WSP) sheathing as exterior sheathing, gypsum board as interior sheathing, and a cladding system installed over WSP sheathing in low-rise residential buildings up to three stories in height.

Website providing building science based guidance and training for residential construction.

Article describing research encouraging use of exterior insulation to warm interior sheathing surfaces in walls and roof assemblies to reduce the likelihood of condensation during cold weather

Report exploring alternative methods to find long-term solutions to energy loss in 1 ½-story homes to save energy, improve comfort, prevent frost buildup on the underside of the roof deck, and reduce the risk of ice dam formation/reformation.

This case study describes costs associated with the External Thermal and Moisture Management System developed by the NorthernSTAR Building America Partnership for retrofitting roofs with rigid foam over the roof deck, especially on one and a half-story homes.

Report focusing on building envelopes that have been enhanced with phase change materials (PCMs), which can simultaneously reduce total cooling loads and shift peak-hour loads.

Job Process sheet for the manufactured housing industry showing how to cut insulation batts to fit wall cavities in a factory production environment.

Article describing strategies for reducing the risk of ice dam formation on roofs in winter.

Guidance document on deep energy retrofits.

Report covering exterior energy retrofits of masonry buildings.

Webpage providing a step-by-step guide for replacing the exterior caulking on your home.

Fact sheet poster describing benefits and qualification of U.S. Department of Energy (DOE) certified Zero Energy Ready Homes and providing eight examples of certified homes.

Information about dense pack, cellulose insulation.

Information sheet with HVAC duct insulation, testing, maintenance and performance information.

Report on how airtighness changes as houses age.

Technical report describing design and construction methodologies for durable balconies and decks, focusing on proper sloping, flashing, drainage, and ventilation to mitigate moisture-related issues.

The objective of this research was to quantify the field performance of wood-frame walls clad with a variety of common claddings in a mixed-humid climate.

Report on problems and solutions with EIFS stucco wall cladding systems.

Website describing the U.S. Environmental Protection Agency's ENERGY STAR New Homes and Apartments program with links to builder and homeowner resources.

Web page providing an overview of window coverings such as blinds, shades, shutters, films, and storm windows.

Fact sheet describing weatherstripping materials, types, expected life expectancy, installation requirements, and pros and cons.

Fact sheet poster describing the certification of window attachment products such as storm windows, roller shades, cellular shade, and solar screens by the Attachment Energy Rating Council (AERC).

Online textbook describing energy, including energy types, and energy use in homes.

Research study examining efficiency retrofit opportunities, typical renovation practices, and pathways for achieving U.S. Department of Energy (DOE) goals for existing homes in Florida.

Website from the U.S. Department of Energy providing consumers with information on saving energy and using renewable energy technologies.

Document presenting a simple starting point to determine the most cost-effective Energy Savings Measure Packages (ESMP) for existing homes to achieve 15% and 30% savings in 37 locations across the United States.

Information sheet with details on a building enclosure designed for Albuquerque, NM, as an example for building enclosures built for hot-dry and mixed-dry climates.

Information sheet that summarizes Insulated Concrete Form (ICF) construction including advantages and disadvantages of this construction strategy.

Report exploring feasibility of designing prescriptive retrofit measure packages for typical Chicago region multifamily buildings in order to achieve 25% source energy savings.

Report summarizing post-retrofit results for 13 existing homes in a deep energy retrofit pilot program.

Report evaluating opportunities to improve and streamline delivery of residential retrofit measures.

Report examining implementation of an exterior insulation and over-clad strategy for brick masonry buildings in Chicago.

Technical report describing the evaluation of four different ventilation strategies for providing make-up air in high-performance, new construction multifamily buildings in the Northeast, emphasizing the challenges posed by increasing airtightness standards and the variability of system performance...

Report about an expert meeting focused on issues surrounding cladding attachment and performance of walls with exterior insulating sheathing.

Report that demonstrates the durability, constructability, and cost-effectiveness of the extended plate and beam (EP&B) wall system for new construction housing projects in compliance with the International Energy Conservation Code, addressing moisture risk management and high-performance envelope...

Fact sheet describing the Extended Plate Wall (EPW) a system that incorporates a 2-inch layer of foam plastic insulative sheathing within the framing for top and bottom plates, streamlining air sealing, window and door installation, weather resistive barrier application, and cladding attachment for...

Summary document describing flood resistant building materials and some tips for building flood resistant walls.

Report on the field evaluation of whole-building approaches and estimation of the relative contributions of select technologies toward reducing energy use related to space conditioning in new manufactured homes.

Report comparing a high-performance house with a code-built control home.

Report presenting the results from several demonstrations of a new method for sealing building envelop air leaks.

Article describing five fundamental changes to building construction from the last 50 years and their modern construction consequences.

Journal article describing energy and cost savings potential from air sealing multifamily town homes.

Research report assessing the moisture and cooling load impacts of airtightness and mechanical ventilation in homes in hot-humid climates.

Journal article describing lessons learned from updating a 16-year-old deep-energy retrofit.

Report about development of effective strategies to reduce the overall building energy use in line with Building America goals in this modestly priced market rate project.