Library

Report evaluating the renovation of a 5,800-ft2, multiuse facility located in St. Petersburg, on the west coast of central Florida, in the hot-humid climate.

Manual that identifies certain leakage limits for ducts and outlines procedures for testing ducts for conformity with air leakage limits that are set forth in a designer’s project specification.

Fact sheet describing building envelope performance measures applicable to residential and small commercial construction.

Webpage providing information about design snow loads and a free interactive ground snow load mapping tool for the contiguous United States, as well as snow load calculation methods.

Literature review from NFPA on the use of insulation to protect the piping in home fire sprinkler systems from freezing conditions.

Standard specification covering elastomeric cellular preformed gasket and sealing materials. This version of the standard was published in the year 2011 and is available for preview and purchase at the reference link. Other versions of the standard were published in the years 2021, 2015, 2006, and...

Standard specification covering elastomeric cellular preformed gasket and sealing materials. This version of the standard was published in the year 2021 and is available for preview and purchase at the reference link. Other versions of the standard were published in the years 2015, 2011, 2006, and...

Standard specification covering the properties of a cured single- or multicomponent cold-applied elastomeric joint sealant for sealing, caulking, or glazing operations on buildings, plazas, and decks for vehicular or pedestrian use, and types of construction other than highway and airfield pavements...

Information sheet about buried ducts.

Website providing information on all types of pest management for multi-family housing.

A website providing timely and accurate forecasts and watches for severe thunderstorms and tornadoes over the contiguous United States.

Report following the evolution of the construction quality process from its development for new homes to its application construction of a HPH with enhanced specifications, and its application in a crawlspace renovation.

Document serving as a starting point that features initial tools and resources for teams to start collaborating to continually improve the energy efficiency and durability of new houses.

A research paper discussing the use of foundation heat exchangers for ground source heat pump systems in European climates.

Research study determining how well high performance envelope and innovative cooling system interact to cost effectively reduce cooling energy use in this hot-dry climate.

This document covers a description of the need and applied solutions for supplemental dehumidification in warm-humid climates, especially for energy efficient homes where the sensible cooling load has been dramatically reduced.

Research study making several recommendations to whole-home program designers and implementers for improving the cost effectiveness and reach of whole-home programs.

Article from Green Building Advisor on the importance of window selection in hot climates, with an emphasis on window glazing.

Report providing a strengths, weaknesses, opportunities, and threats (SWOT) analysis inherent to different models as a way of thinking about the transition from traditional business models into a viable model for delivering deep energy retrofits.

Report about seeking a 30% source energy savings targets over a comparable 2009 International Energy Conservation Code-built home in the cold climate zone, using simple measures.

Report developed for Habitat for Humanity about lessons learned from demonstration retrofit projects undertaken by Habitat for Humanity affiliates in New York, Maryland, and Pennsylvania; with building systems consulting and technical assistance provided by Steven Winter Associates.

Standard 55 specifies conditions for acceptable thermal environments and is intended for use in design, operation, and commissioning of buildings and other occupied spaces; is the current version of the standard, which was published in the year 2021, and is available for preview and purchase at the...

Article on thermal protectors in recessed light fixtures.

Factsheet providing design guidance for engineers describing how to characterize snow drifts on roofs in three dimensions rather than two, as anticipated in the 2022 edition of the standards, ASCE 7 - Minimum Design Loads and Associated Criteria for Buildings and Other Structures.

Article describing tips for effectively installing weatherstripping on windows and doors.

Case study about a structural sheathing product composed of enhanced EPS rigid foam with OSB adhered on one side.

Information sheet about types and installation of insulation.

Website providing guidance for people to find and use tools, information, and subject matter expertise to build climate resilience.

Webpage for the United States Geological Survey for the Department of the Interior.

Information sheet providing definitions, applications, and techniques for applying air barriers.

Information sheet with methods for constructing or retrofitting basements to reduce moisture issues.

Interactive map maintained by the USDA showing plant hardiness zones throughout the U.S.

Technical fact sheet highlighting important building connections and illustrating the proper use of various types of connection hardware; also published in FEMA P-499 “Home Builder’s Guide to Coastal Construction: Technical Fact Sheet Series.”

Research report that validates Pinhole Insulation®, offering a cost-effective, minimally invasive solution for enhancing insulation and air sealing in enclosed roof cavities, improving R-value by 60% compared to traditional methods.

Report about a project with successful integration of numerous energy-conservation and renewable-energy features into a beautiful, comfortable, and very energy-efficient off-grid home.

Building science report describing issues with vented attics in hot-humid climates and how sealed attic construction may be a solution.

Information sheet about proper ventilation and air sealing.

Guide providing information on controlling attic ductwork sweating.

Fact sheet describing how to identify heat-related illness and what actions to take.

Article describing the process of adding weatherstripping to and weatherizing old doors.

An overview of impacts from weather, climate, and water extremes globally from 1970 to 2019 based on disaster data from the Emergency Events Database (EM-DAT)

Webpage describing weatherstrip tips and tricks to properly air seal doors.

Fact sheet describing how weatherstripping can be an easy and cost-effective way to save money on energy costs and improve comfort by reducing drafts.

Article describing an overview of weatherstripping requirements.

Webpage describing how different amounts and types of snow loads affect the structural integrity of roofs and homes.

Document describing different spray foam materials including some pros and cons and technical specifications.

Introductory guide to air sealing the envelope of a home to reduce wasted energy and save on energy costs.

Webpage from USDA and U.S. Forest Service with a map of potential wildfire risk across the U.S.

A website created by the U.S. Forest Service, containing interactive maps, charts and resources to help communities explore their risk to wildfires.

Report outlining the features of a test house built in Silver Spring , Maryland, and discussing the implementation of the energy efficient design, and reports on the short-term testing results.