Library

Report identifying business models for the remodeling industry that foster remodelers adoption of energy efficiency services.

Article describing the difference between swales and hugels (berms used to create soil from woody debris).

The objective of this research was to quantify the field performance of wood-frame walls clad with a variety of common claddings in a mixed-humid climate.

Journal article presenting a discussion of the state-of-the- art in electricity management in smart homes, the various enabling technologies that will accelerate this concept, and topics around consumer behavior with respect to energy usage.

Presentation about results from an insulating concrete form energy efficiency study in Knoxville, TN.

Document providing descriptions of the many insulation options available to homeowners, along with guidance on where, when, and how to install insulation throughout your house.

Research study examining efficiency retrofit opportunities, typical renovation practices, and pathways for achieving U.S. Department of Energy (DOE) goals for existing homes in Florida.

Information sheet briefly summarizing double stud with spray foam wall construction including the advantages and disadvantages of this construction strategy.

Research study simulation adapting and applies the general framework described in Building Energy Simulation Test for Existing Homes for self-testing residential building energy model calibration methods.

Study investigating homeowner measure package choices in the Illinois Home Performance with ENERGY STAR program compared to cost-optimal choices determined through Building Energy Optimization (BEopt) modeling software.

Technical report describing the evaluation of four different ventilation strategies for providing make-up air in high-performance, new construction multifamily buildings in the Northeast, emphasizing the challenges posed by increasing airtightness standards and the variability of system performance...

Report describing a project focused on the use of home energy ratings as a tool to promote energy retrofits in existing homes.

Report comparing a high-performance house with a code-built control home.

Report describing a simple and general way to generate House Simulation Protocol (HSP)-consistent internal sensible and latent loads in unoccupied homes.

Report presenting the results from several demonstrations of a new method for sealing building envelop air leaks.

Research report assessing the moisture and cooling load impacts of airtightness and mechanical ventilation in homes in hot-humid climates.

Article discussing flow-through assemblies of walls.

Journal article describing lessons learned from updating a 16-year-old deep-energy retrofit.

Website providing resources for roofers to construct high-wind, hurricane, and hail-resistant roofs from IBHS Fortified program.

The FPC Monitoring project has evaluated radiant barrier systems (RBS) as a new potential DSM program.

Results from a research program testing airtightness, implications of air leakage and contaminant reduction over the garage-to-house interface.

Website with prepopulated information about the United States renewable resources.

Report detailing field walk-through evaluations, energy simulations for projected savings with exterior insulation upgrades, building envelope energy improvement cost estimates, and installation and maintenance of monitoring equipment and data.

Research report presenting results of short term tests on measures used in an energy efficiency retrofit project in California.

Report describing a laboratory assessment that provides insights into space requirements and venting strategies for heat pump water heaters (HPWH) to enhance retrofit installations and provide actionable guidance for manufacturers, designers, engineers, installers, and owners.

Report discussing the potential energy savings of new high-efficiency downlights, and the results of product testing to date.

Information sheet about air barriers.

Article describing the stack effect in buildings.

Report sumarizing results of an ICF investigation of side-by-side houses in Knoxville, Tennessee.

Website blog with guidance about calculating heat-loss.

Correcting pressure imbalances in your HVAC system can result in a healthier, more efficient home.

Report outlining results from a 2005 hygrothermal pilot study in the South.

Report describing the results of a 21-home field study investigating the effectiveness and failure rates of whole-house mechanical ventilation systems installed in Florida homes over the last 15 years.

Report describing research conducted to support California’s Title 24, Part 6 Building Energy Efficiency Standards by analyzing the impact of installation location and ventilation on heat pump water heater (HPWH) performance, emphasizing the need for proper installation to maximize efficiency...

Report using a field test plan to evaluate the success of implementing energy efficiency upgrades at the community scale incorporating whole-house systems integrated measures package (SIMP).

Factsheet describing how to test the duct leakage of a manufactured home in the manufactured home factory.

Guidebook providing useful examples of high performance retrofit techniques for the building enclosure of wood frame residential construction in a cold and somewhat wet climate.

Siding installation guide for Ply Gem Siding Group products.

Article describing methods for insulating and air sealing vented and unvented roofs in various climates zones.

Measure Guideline describing how to assess and carry out the isolation of natural draft combustion appliances from the conditioned spaces of low-rise residential buildings.

This measure guideline provides guidance on combustion safety inspection procedures for appliances and heating equipment that use indoor air for combustion and dilution of flue gases in low-rise residential buildings.

Repor ourlining testing results from a 53 home monitored sample, long-term energy use of electric resistance clothes dryers.

Report describing a lighting and smart power strip retrofit evaluation that was conducted on 56 all-electric, existing Florida homes to see how lighting and miscellaneous electric loads might be reduced.

Report describing an analysis method for determining optimal residential energy efficiency retrofit packages and applies the analysis method to a 1960s-era home in eight U.S. cities.

Standard that prescribes a testing method to determine the efficiency of space heating and/or cooling thermal distribution systems under seasonal and design conditions. This version of the standard was published in the year 2014, and is available for preview and purchase at the reference link. The...

Report providing extensive guidance on controlling moisture in building envelopes through proper selection and installation on air, water, thermal, and vapor barriers.

The next generation of building enclosures is a key step toward achieving high-performance goals through decreasing energy load demand and enabling advanced space-conditioning systems. Yet the adoption of high-R enclosures and particularly high-R walls has been a slow-growing trend because...

Building science insight into crawlspaces.

Document about development of a new test procedure to increase the quality and accuracy of energy analysis tools for the building retrofit market.

Report presenting the results of a study evaluating retrofit solutions for addressing the effects of wind washing on homes.