Library

Web article describing common issues that can cause refrigerant system flare joints to leak.

2009 edition of code establishing minimum regulations for plumbing facilities, including fixtures, water heaters, water supply and distribution, sanitary drainage, storm drainage, etc.

2012 edition of code establishing minimum regulations for plumbing facilities, including fixtures, water heaters, water supply and distribution, sanitary drainage, storm drainage, etc.

Document describing the air leakage provisions of Appendix RA of the 2015 IECC (prepared for the State of Georgia to assist with compliance with their 2019 Energy Code).

2015 edition of code establishing minimum regulations for plumbing facilities, including fixtures, water heaters, water supply and distribution, sanitary drainage, storm drainage, etc.

2018 edition of code establishing minimum regulations for plumbing facilities, including fixtures, water heaters, water supply and distribution, sanitary drainage, storm drainage, etc.

Report describing how changing the air exchange rate of a home (the sum of the infiltration and mechanical ventilation airflow rates) affects the annual thermal conditioning energy.

Standard providing master specifications for closed cell, medium density spray polyurethane foam air barriers located in the non-accessible part of the wall.

Standard outlining materials and installation methods by using commercial building wraps.

Standard providing information about self-adhered sheet air barriers located in the non-accessible part of the wall and materials to bridge and seal air leakage pathways and gaps.

Standard outlining materials and installation methods for a liquid-applied vapor permeable air barrier systems located in the non-accessible part of the wall.

Vinyl siding estimating and installation guide for vinyl siding products.

A website explaining the process of sealing a home with Aeroseal & how the technology is used to seal holes in the air ducts and vents of the home.

Report examining the effectiveness of an aerosolized acrylic technique for air sealing existing homes to reduce air leakage and improve energy efficiency.

Technical report describing the research behind a new aerosol-based sealing method, utilizing pressurization and a dispersed sealant fog, facilitated by a standard blower door, to automatically measure, locate, and seal air leaks in new homes in the United States, providing an efficient solution to...

Fact sheet describing an innovative aerosol-based sealing technique for tightening building envelopes in new homes, involving pressurizing the structure and dispersing an aerosol sealant "fog" to autonomously identify and seal leaks, with real-time feedback through a standard blower door and laptop...

Brochure about creating an air barrier by sealing drywall assemblies.

Brochure about creating an air barrier at tub, shower and fireplace walls.

Information on the control of air flow across building enclosures to control moisture damage, reduce energy losses, and ensure occupant comfort and health. A continuous, strong, stiff, durable and air impermeable air barrier system is required between the exterior and conditioned space to control...

Document reporting results from a study done to evaluate effects of automotive emissions from attached garages on the indoor environment.

Fact sheet describing air-sealing concerns and remedies, including HRV/ERV installation, caulking, spray foam, and weatherstrip installation.

Article describing how an airtight home shell helps achieve a tight envelope that is energy efficient and cost effective.

Article describing how to stop air leaks around the windows and doors of a home.

Website article interviewing the inventor of the Larsen truss, a history of its use, and a discussion of its advantages and disadvantages.

Article about different types of weather resistant barrier.

Article describing air sealing and air barriers in buildings.

Technical report describing the thermal performance of 40 common building envelope details for mid- and high-rise buildings, including analyses to optimize energy efficiency and reduce thermal bridging.

ASTM standard providing test methods for determining duct air leakage in low-rise residential and commercial buildings.

Article describing how demand plumbing systems send cold water back to the water heater until hot water arrives at the sink, shower or other fixture where it is needed.

Case study describing solar thermal and photovoltaic systems in new construction.

Document focusing on the design and wall components that contribute to a pressure equalized rain screen wall, including the frequency of the weep holes and other brick masonry rain screen wall requirements.

Case study describing solar thermal and photovoltaic systems in new construction.

Case study describing solar thermal and photovoltaic systems in new construction.

Report comparing a variety of roof insulating strategies to present their advantages and disadvantages according to several comparison criteria.

Website with consumer and contractor information about building codes and regulations for solar water heating systems.

Guide describing methodologies for assessing and mitigating thermal bridging in building envelopes, featuring detailed performance data, interface solutions, and assembly-specific strategies for energy-efficient construction.

Report outlining how conditioned crawlspaces perform better than vented crawlspaces in terms of safety, health, comfort, durability and energy consumption.

Document presenting step-by-step process for installing rigid insulating sheathing over wood studs or house wrap.

Report exploring alternative methods to find long-term solutions to energy loss in 1 ½-story homes to save energy, improve comfort, prevent frost buildup on the underside of the roof deck, and reduce the risk of ice dam formation/reformation.

Report describing the monitored long-term performance of two solar domestic water heating systems in northern climates.

Website providing lists of WaterSense-qualified products for home plumbing and irrigation equipment that meet the requirements of the U.S. Environmental Protection Agency’s (EPA’s) WaterSense program.

Article describing the difference between swales and hugels (berms used to create soil from woody debris).

A quick guide from the California Division of the State Architect (DSA) explaining the three types of gas shutoff devices to stop the flow of natural gas into buildings in the event of an earthquake or rupture of the gas line.

Document providing descriptions of the many insulation options available to homeowners, along with guidance on where, when, and how to install insulation throughout your house.

Information sheet briefly summarizing double stud with spray foam wall construction including the advantages and disadvantages of this construction strategy.

Report exploring feasibility of designing prescriptive retrofit measure packages for typical Chicago region multifamily buildings in order to achieve 25% source energy savings.

Documents describing Flood Resistant Provisions of the international codes (including the international building, residential, exiting building, mechanical, plumbing, fuel gas, fire, swimming pool and spa, private sewage disposal, and code council performance codes) and summaries of changes from the...

Factsheet describing backflow valve benefits and tips.

Report comparing a high-performance house with a code-built control home.

Report presenting the results from several demonstrations of a new method for sealing building envelop air leaks.