Library

Report detailing natural ventilation and passive airflow systems.

Indoor airPLUS is a voluntary partnership and labeling program that helps new home builders improve the quality of indoor air by requiring construction practices and product specifications that minimize exposure to airborne pollutants and contaminants.

Website providing the technical specifications and related documents for home builders, subcontractors, architects, and other housing professionals interested in certifying a home to the EPA's Indoor airPLUS program requirements.

A factsheet providing information on how to prevent pests from entering the home by sealing cracks and openings.

Article describing excess flow valves installed on gas lines to shut-off natural gas flow to a home in the event that a gas line is severed due to an earthquake, natural disaster, earthquake, etc.

Article from Samuel L. Manzello and Sayaka Suzuki on tests undertaken to find the ideal amount of board spacing to resist deck ignition during fires.

Webpage detailing how to purchase and install the correct shut-off valve for homes in California, including differences between earthquake and excess flow valves and how to install each.

Site showing flame spread ratings and definitions for common building materials.

Article from Building Science Corporation explaining 'wash and wear buildings' that are designed to be flooded and washed out afterwards.

This document covers how broken windows can allow wind and rain inside the house and even lead to roof failure.

Article describing what evaporative coolers are, how they work, different types, performance, where they are appropriate, and how to install and maintain them.

Report showing installers how to attach ducts, pipes, and associated equipment to buildings to minimize earthquake damage.

Report with guidance for installing windows with foam sheathing on wood-frame walls.

Article describing the insurance savings of a home with a hip roof versus a gable roof from the perspective of an insurance advisor.

Guide describing the use of a collaborative, multidisciplinary process that considers and optimizes the building as an entire system including its technical equipment and surroundings for efficient, sustainable, and cost-effective construction and operation over the building’s entire lifespan.

Article describing how the configuration of surrounding buildings affects the wind loads on a hip roof in a low-rise building.

Article outlining the use of spray polyurethane foam in residential buildings.

Report that describes BSC's Houses That Work II (HTWII) climate-specific technical resource, beginning with an overall HTWII introduction and four sections explaining the four most important hygro-thermal climate regions: Hot-Humid, Mixed-Humid, Cold, and Hot-Dry/Mixed-Dry.

Website providing a probabilistic map of the expected number of damaging earthquakes around the U.S.

Report discussing how to create livable space in the attic that meets IRC code requirements by either creating a ventilated roof assembly, or and unvented attic assembly.

Webpage describing benefits of adding battery storage to homes and an estimation tool.

Document from IBHS explaining how to inspect homes for earthquake preparedness and retrofit solutions for homes that have suffered structural damage as a result of earthquakes.

Article describing dozens of ideas on how to retrofit a home so it is more earthquake ready.

Guide describing tools for island and hurricane-prone communities on redevelopment and rehabilitation of homes to prepare for future natural disasters.

Web page describing how to identify heat-related illness and how to prevent it.

Article from University of Arizona on keeping homes cool during extreme heat, both personal and system changes.

Webpage describing how to conserve heat or find alternative heat sources during a power outage to keep one room warm.

Article showing steps for kick out flashing at roof-wall intersection.

Website describing the wildland-urban interface code and providing links to resources.

Paper describing vegetation impacts on cooling load for buildings.

2017 version of a standard covering requirements for single- and dual-pane windows, glazed side-hinged door systems, sliding doors, tubular daylighting devices, and unit skylights developed jointly by the American Architectural Manufacturers Association (AAMA), the Canadian Standards Association...

Guidance from EPA, HUD, NIH, and OSHA on worker and employer interactions with lead contaminants.

Website explaining the LEED v4.1 program and providing a portal for those who want to investigate or start a LEED project.

Webpage published by the National Fire Protection Agency (NFPA) that lists more than 300 consensus codes and standards intended to minimize the possibility and effects of fire and other risks.

Test results used by multiple structural insulated panel manufacturers confirming a one-hour fire rating for specific SIP assemblies.

A publication describing how to protect coastal investments by adapting to natural processes and protecting coastal environments and shorelines.

Guide for homeowners describing actions they can take to modify their home and the surrounding site to create a survivable space to reduce the amount of damage a home would likely experience during a wildfire.

Article describing lessons for builders and changes to local building code in Colorado Springs in response to regional wildfires.

Factsheet describing the concept of load paths and the important connections in a wind uplift load path; also published in FEMA P-499 “Home Builder’s Guide to Coastal Construction: Technical Fact Sheet Series.”

Guide describing sound mitigation measures to lower building natural disaster vulnerability to assist local officials and community decision makers in coastal areas.

Report presenting a cold climate project that examines the relationships among energy efficient single-family residential thermal enclosures, room-to-room temperature variations, and simplified space conditioning systems.

Report about a two-year study intended to document the energy performance of a house in each sub-metered area and compare the performance to modeled predictions and to assess the thermal comfort performance of the single point mini-split heat pump.

Report using a field test plan to evaluate the success of implementing energy efficiency upgrades at the community scale incorporating whole-house systems integrated measures package (SIMP).

News article describing the state of the residential battery storage market.

A webpage outlining CAL FIRE’s recommendations for creating defensible space.

Webpage from Boston Solar describing how solar plus storage options can be beneficial for maintaining electricity during power outages.

Web article describing many ways homeowners, contractors, and builders can make homes more resistant to hurricanes, tornadoes, high winds, floods, and hail.

Guidebook providing useful examples of high performance retrofit techniques for the building enclosure of wood frame residential construction in a cold and somewhat wet climate.

This Measure Guideline provides design and construction information for a deep energy enclosure retrofit solution of a flat roof assembly.