Library

Case study about high humidity, mold and condensation on surfaces in S. Florida, and how building characteristics cause and amplify these problems.

Research report describing study of interior and exterior air sealing techniques to stop ice dams in five 1.5-story retrofit homes conducted by the NorthernSTAR Building America Partnership team run by University of Minnesota.

Report providing water management details for roof assemblies.

Article describing correct ways to eliminate water damage by incorporating a sacrificial layer to foundation walls and footings.

This case study describes costs associated with the External Thermal and Moisture Management System developed by the NorthernSTAR Building America Partnership for retrofitting roofs with rigid foam over the roof deck, especially on one and a half-story homes.

Factsheet describing steps builders should take to reduce erosion and control sediment on construction sites during home construction.

Case study describing novel technique for installing exterior spray foam on foundation walls that uses high-pressure water sprayer and a “hydro vac” to remove dirt along the foundation wall.

Handbook describing the permitting process regulating the transfer of stormwater from private property owners to the State of Florida Department of Transportation stormwater drainage systems.

Research report assessing the moisture and cooling load impacts of airtightness and mechanical ventilation in homes in hot-humid climates.

PDF detailing the inspection and verification guidance for WaterSense labeled new homes including indoor and outdoor efficiency requirements, and homeowner and building management education.

Measure Guideline research report providing simple, long term, and durable solutions when using tapes and flashing membranes in conjunction with the exterior face of rigid polymeric foam sheathing to create the drainage plane of a wall system.

Case study about how to properly tape insulating sheathing drainage planes.

Document describing common questions about moisture, mold, and wood.

An NFPA Standard that identifies a method for determining the minimum water supply necessary for structural fire-fighting purposes in areas where it has been determined that there is no water or inadequate water for fire fighting.

Case study describing the External Thermal and Moisture Management System developed by the NorthernSTAR Building America Partnership for retrofitting roofs with rigid foam over the roof deck, especially on one and a half-story homes.

Fact sheet describing design and construction practices to reduce the likelihood of water intrusion in walls and foundations in residential construction.

Resource to help builders better understand the WaterSense requirements for labeled homes and assist them in meeting the criteria so they can receive the label for their new construction.

Fact sheet describing water management in a residential building.

Article describing the evolution of the IRC to permit class 3 vapor retarders (latex paint) in walls coupled with exterior continuous insulation to allow drying and reduce condensation risk.

Resource that provides a checklist of program criteria for water-efficient new homes under the U.S. Environmental Protection Agency’s (EPA’s) WaterSense program.