Library

Newsletter containing five articles focused on seismic retrofitting.

Article outlining the key issues related to the protection of the building envelope against seismic forces.

Description of California Senate Bill SB 1898, which requires the sale of new seismic gas shutoff devices sold in California to be certified by the State Architect.

Fact sheet describing guidance concerning lot selection and building siting considerations for coastal residential buildings, including factors that constrain siting decisions, coastal setback lines, common siting problems, and suggestions for builders, designers, and owners; also published in FEMA...

Report from FEMA describing techniques for floodproofing structures.

A website providing information on how to properly size a water heater based on tank size, volume, peak hour demand and other factors.

How hard can it be to insulate a flat sheet of concrete? I mean you only have three choices – on the top, on the bottom, or on the edge. OK, you might have some combination of the three as well.

Report describing a comparison of hydrothermal performances of DryRightTM fiberglass batts and kraft-faced fiberglass batts in a south facing wall assembly with a moisture storage cladding material.

Guide providing guidance on conducting seismic risk assessments for buildings. The link goes to the current version of this standard, which was published in the year 2016 and is available for preview and purchase. Previous editions of this standard were published in the year 2016, 2007, and 1999...

Practice providing a guide or standard to undertake seismic risk assessment of properties. The current version of the standard was published in the year 2016 and is available for preview and purchase at the link. Previous versions of the standard were published in the years 2016 and 2007, and are...

Specification describing criteria for manufactured polymeric materials used to provide a rainscreen function, a means for the drainage of liquid moisture and the ventilation of vapor moisture that enters an above-grade exterior wall assembly which was published in the year 2019, and is available for...

Bill requiring the Consumer Product Safety Commission to revise the safety standards for freestanding clothing storage units such as a dressers, bureaus, or chests of drawers to include testing related to tip overs and new warning requirements for all such products entering the U.S. market; passed...

Document providing information on correct storage techniques for lumber to manage moisture.

Document describing correct construction of swales, designed to trap particulate pollutants (suspended solids and trace metals), promote infiltration, and reduce the flow velocity of storm water runoff.

Article describing ways to protect roofs from water infiltration by using self-adhering underlayment in vulnerable locations such as roof valleys, eave edges (to help deal with ice dams), rake edges, roofs to vertical walls (such as dormers), sidewall protection, the bottom of dormer valleys, and...

Report recommending strategies and approaches that the Federal government and other stakeholders may take to encourage and aid States and local communities in the adoption of the most current building codes.

Article describing three ways to strengthen the roof-to-wall connections in an existing home.

Article defining structural design loads and ways to calculate them, including dead loads, live loads, soil lateral loads, wind loads, snow loads, earthquake loads, and other loads.

Document describing issues of wind pressure resistance in walls with exterior rigid foam sheathing installed directly over framing members.

Resource manual for builders, designers, architects, plumbers, and others interested in the WaterSense Labeled Homes Program providing an overview of the program, explains how to meet the program requirements, gives descriptions of water-saving technologies, and provides links to further resources.

Report providing a selected compilation of seismic rehabilitation techniques and guidance on which techniques are commonly used to mitigate specific seismic deficiencies in various model building types.

Brochure with information about how to select and install house wrap and other weather-resistive barriers.

Fact sheet describing water management in a residential building.

This TechNote provides an overview of building code requirements and best practices for flashing at window and door frames.

Article describing a research study exploring how effective interior insulation systems are at keeping basements dry and warm.

Fact sheet describing building codes, seismic codes, and code enforcement.

A field guide with residential construction best practices.

Manuals describing design, materials, and installation techniques applicable to almost all types of roof systems; four-volume set includes Metal Panel and SPF Roof Systems, Membrane Roof Systems, Architectural Metal Flashing and Condensation and Air Leakage Control, and Steep-Slope Roof Systems.

Report describing seismic retrofit of historical buildings.

Article describing the evolution of the IRC to permit class 3 vapor retarders (latex paint) in walls coupled with exterior continuous insulation to allow drying and reduce condensation risk.

Case study about a structural sheathing product composed of enhanced EPS rigid foam with OSB adhered on one side.

Guide addressing troubleshooting and frequently asked questions about water pressure.

Webpage for the United States Geological Survey for the Department of the Interior.

Guide providing information about controlling rainwater through use of drainage planes.

Information sheet describing the function of a vapor barrier, and methods to retard the migration of water vapor.

Webpage from Southern California Earthquake Center (SCEC) on identifying key problem spots on unreinforced masonry chimneys and how to retrofit them to withstand seismic forces.

Presentation describing the challenges of insulating an existing basement, presented to the Building America residential energy-efficiency stakeholder meeting.

EPA WaterSense guidance on urinals.

Article describing how adhesives can be used to make homes in high-wind locations stronger and how adhesives could be too effective resulting in overloading foundation anchors under earthquake loads.

Article describing a method for flashing roof vent boots, describing how to flash the pipe, how to flash over and under the pan, and finish by shaping the shingles, as well as addressing potential water leakage by adding an additional seal with EPDM flashing tape with a butyl adhesive backing to the...

Guide providing information on controlling attic ductwork sweating.

Products and specification for a State of California-compliant earthquake-actuated automatic gas shutoff valve.

Report describing filtration, distillation, and disinfection methods of water treatment.

A info sheet providing information on ENERGY STAR certified water heaters and the various criteria water heaters must undergo to become ENERGY STAR certified, including metrics on efficiency and performance.

Document outlining a well-detailed drainage plane and flashings.

Document providing guidance on water management concepts and applications for residential buildings.

Report summarizing current research, summarizes issues that have been experienced with current best practices, and recommends ways in which the best practices can be improved for water managing sheathings.

Guide describing details that serve as a visual reference for each of the line items in the Water Management System Builder Checklist.

A builder checklist guide for the water management of properties with appropriately-designed building technologies.

Article describing different types of water softeners and how they work.