Showing 251 - 300 of 407 results:
Publication Date
·
Author(s)
Stephenson R,
Roberts David
·
Organization(s)
NAHB Research Center Industry Partnership,
National Renewable Energy Laboratory,
NREL,
U.S. Department of Energy,
DOE
Description
Document providing renovators and retrofit contractors an overview of considerations when including wall air sealing and insulation in an energy retrofit project.
Publication Date
·
Author(s)
Dickson Bruce
·
Organization(s)
Integrated Building and Construction Solutions,
IBACOS,
U.S. Department of Energy,
DOE
Description
Report covering the fundamental waterproofing strategies for tub and shower assemblies.
Publication Date
·
Author(s)
Parker Danny S
·
Organization(s)
Florida Solar Energy Center,
FSEC,
University of Central Florida,
UCF
Description
Study investigating measured cooling energy savings from the installation of wall finishes with higher solar reflectance.
Publication Date
·
Author(s)
Hershey Don
·
Organization(s)
4Ward Consulting Group
Description
A presentation describing the standards regarding who is responsible for what part of the design to ensure the roof truss is properly designed and braced.
Publication Date
·
Author(s)
Federal Emergency Management Agency
·
Organization(s)
FEMA
Description
A Recovery Advisory guide reccomending practices for designing and installing metal roof systems that will enhance wind resistance in high-wind regions (i.e., greater than 90-miles per hour [mph] gust design wind speed).
Publication Date
·
Author(s)
American Society of Civil Engineers
·
Organization(s)
ASCE,
SEI
Description
Standard using performance-based principles to determine dead, live, soil, flood, tsunami, snow, rain, atmospheric ice, earthquake, wind, and fire loads, and their combinations for general structural design. This version of the standard was published in the year 2016 and is available in both digital...
Publication Date
·
Author(s)
American Society of Civil Engineers
·
Organization(s)
ASCE,
SEI
Description
Standard using performance-based principles to determine dead, live, soil, flood, tsunami, snow, rain, atmospheric ice, seismic, and wind loads, and their combinations for general structural design. The current version of this standard was published in the year 2022 and is available in both digital...
Publication Date
·
Author(s)
American Society of Civil Engineers
·
Organization(s)
ASCE,
SEI
Description
Standard using performance-based principles to determine dead, live, soil, flood, snow, rain, atmospheric ice, earthquake, and wind loads, and their combinations for general structural design. This version of the standard was published in the year 2010 and is available in both digital and print...
Publication Date
·
Author(s)
Federal Emergency Management Agency
·
Organization(s)
FEMA
Description
FEMA mitigation assessment team report following Hurricane Charley in Florida including observations, recommendations, and technical guidance for retrofitting hurricane-damaged homes.
Publication Date
·
Author(s)
Federal Emergency Management Agency
·
Organization(s)
FEMA
Description
FEMA mitigation assessment team report following Hurricane Ivan in Florida and Alabama including observations, recommendations, and technical guidance.
Publication Date
·
Author(s)
Federal Emergency Management Agency
·
Organization(s)
FEMA
Description
FEMA Mitigation Assessment Team Report describing damages from Hurricane Michael in Florida in Oct. 2018 and recommendations for future hurricane preparedness.
Publication Date
·
Author(s)
Federal Emergency Management Agency
·
Organization(s)
FEMA
Description
Report providing a resource that communities can use to identify and evaluate a range of potential mitigation actions for reducing risk to natural hazards and disasters.
Publication Date
·
Author(s)
Grin Aaron,
Lstiburek Joseph W
·
Organization(s)
Building Science Corporation,
BSC,
National Renewable Energy Laboratory,
NREL,
U.S. Department of Energy,
DOE
Description
Report describing the work conducted for high performance hybrid assemblies.
Publication Date
·
Author(s)
Lstiburek Joseph W
·
Organization(s)
Building Science Corporation,
BSC,
U.S. Department of Energy,
DOE
Description
Report providing extensive guidance on controlling moisture in building envelopes through proper selection and installation on air, water, thermal, and vapor barriers.
Publication Date
·
Author(s)
LePage Robert,
Schumacher Christopher,
Lukachko Alex
·
Organization(s)
Building Science Corporation,
BSC
Description
Report explaining moisture-related concerns for high R-value wall assemblies and discusses past Building America research work that informs this study.
Publication Date
·
Author(s)
Kochkin Vladimir,
Shah Nay B
·
Organization(s)
Home Innovation Research Labs,
HIRL,
U.S. Department of Energy,
DOE
Description
The next generation of building enclosures is a key step toward achieving high-performance goals through decreasing energy load demand and enabling advanced space-conditioning systems. Yet the adoption of high-R enclosures and particularly high-R walls has been a slow-growing trend because...
Publication Date
·
Author(s)
Arena Lois,
Mantha Pallavi
·
Organization(s)
Consortium for Advanced Residential Buildings,
CARB,
Steven Winter Associates,
SWA,
National Renewable Energy Laboratory,
NREL,
U.S. Department of Energy,
DOE
Description
Report describing evaluation of several configurations of wall assemblies to determine the accuracy of moisture modeling and make recommendations to ensure durable, efficient assemblies.
Publication Date
·
Author(s)
Ueno Kohta
·
Organization(s)
Building Science Corporation,
BSC
Description
Report on a study monitoring moisture conditions of double-stud wall assemblies with different insulation in Devens, Massachusetts.
Publication Date
·
Author(s)
Ueno Kohta,
Lstiburek Joseph W
·
Organization(s)
Building Science Corporation,
BSC
Description
Report detailing a three-winter study on unvented roof assemblies in a cold climate, assessing insulation material, ridge diffusion vent presence, vapor control membranes, relative humidity, and interstitial airflow. Results indicate that utilizing air-permeable fibrous fill insulations in unvented...
Publication Date
·
Author(s)
Ueno Kohta,
Lstiburek Joseph W
·
Organization(s)
Building Science Corporation,
BSC
Description
Report detailing a three-winter study on unvented roof assemblies in a cold climate, assessing insulation material, ridge diffusion vent presence, vapor control membranes, relative humidity, and interstitial airflow; results indicate that utilizing air-permeable fibrous fill insulations in unvented...
Publication Date
·
Author(s)
Steven Winter Associates
·
Organization(s)
SWA
Description
Report providing guidance to air-sealing multifamily homes.
Publication Date
·
Author(s)
Extreme Panel Technologies
·
Organization(s)
Extreme Panel Technologies
Description
Information sheet with nail withdrawl capacities in OSB.
Publication Date
·
Author(s)
Natural Disasters Association,
National Hazard Mitigation Association
·
Organization(s)
NDA,
NHMA
Description
Website providing information on tsunamis, earthquakes, tornadoes, hurricanes, thunderstorms and more.
Publication Date
·
Author(s)
National Oceanic and Atmospheric Administration,
National Weather Service
·
Organization(s)
NOAA,
NWS
Description
The Saffir-Simpson Hurricane Wind Scale is a 1 to 5 rating based on a hurricane's sustained wind speed.
Publication Date
·
Author(s)
Schneider Philip J,
et al.
·
Organization(s)
Natural Institute of Building Science,
NIBS
Description
Report updating and expanding on a 2005 study that found, among other things, that every $1 of natural hazard mitigation funded by FEMA between 1993 and 2003 saved the American people an average of $4 in avoided future losses.
Publication Date
·
Author(s)
U.S. Geological Survey
·
Organization(s)
USGS
Description
Website containing USGS-related publications related to natural hazards.
Publication Date
·
Author(s)
Simpson Strong Tie
·
Organization(s)
Simpson Strong Tie Structural Engineering Blog
Description
Article describing a steel connector product for jack rafter connections.
Publication Date
·
Author(s)
Ridouane El Hassan
·
Organization(s)
National Renewable Energy Laboratory,
NREL,
U.S. Department of Energy,
DOE
Description
Document about development of models for evaluating thermal performance of walls in existing homes that will improve the accuracy of building energy simulation tools when predicting potential energy savings of existing homes.
Publication Date
·
Author(s)
Wieber Michael
·
Organization(s)
NW Seismic
Description
A website containing a video series by NW Seismic illustrating how a seismic retrofit should be done and ways they are done incorrectly.
Publication Date
·
Author(s)
Federal Alliance For Safe Homes
·
Organization(s)
FLASH
Description
Report providing quick reference guide information to help a family prepare for hurricane season, including seven steps to a wind resistant home, a wind inspection checklist, and how to find a contractor.
Publication Date
·
Author(s)
Tecle Amanuel S,
Bitsuamlak Girma T,
Chowdhury Arindam Gan
·
Organization(s)
Journal of Architectural Engineering,
American Society of Civil Engineers,
ASCE
Description
Study examining how design features, such as building envelope openings and compartmentalization, affect the wind pressure in typical low-rise buildings with gable and hip roofs.
Publication Date
·
Author(s)
Occupational Safety and Health Administration
·
Organization(s)
OSHA
Description
A fact sheet educating the public on the potential hazards and safe use of portable generators.
Publication Date
·
Author(s)
Lstiburek Joseph W
·
Organization(s)
Building Science Corporation,
BSC
Description
Report covering wind loading on roofing assemblies.
Publication Date
·
Author(s)
Peavey John,
Shah Nay B
·
Organization(s)
Home Innovation Research Labs,
HIRL,
U.S. Department of Energy,
DOE,
National Renewable Energy Laboratory,
NREL
Description
Technical report describing research aimed to provide window manufacturers with foundational guidance for installing windows in walls with continuous insulation (CI), addressing critical aspects such as evaluating common installation methods, establishing acceptance criteria for window performance...
Publication Date
·
Author(s)
Jarnskjold Tobias,
Jensen Geir,
Knudsen Atle
·
Organization(s)
Edition Diffusion Presse Sciences,
EDP Sciences
Description
A study on how fires spread through exterior building envelopes with discussion on how fires propagate in a rain screen cavity.
Publication Date
·
Author(s)
Fowler Mark,
Stanley Bryan,
Coats Darin
·
Organization(s)
Technical Services Information Bureau,
Walls & Ceilings
Description
Manual describing design, detailing, material selection and troubleshooting for plaster, IEFs, and drywall, with information on continuous insulation, air barriers, rain screens, and ratings for fire and sound.
Publication Date
·
Author(s)
Rosado Pablo,
Levinson Ronnen
·
Organization(s)
Lawrence Berkeley National Laboratory,
LBNL
Description
Large scale simulation study investigating the effects of cool roofs and walls on buildings of various vintages across the U.S., with special attention given to California.
Publication Date
·
Author(s)
Aldrich Robb,
Arena Lois,
Zoeller William
·
Organization(s)
Steven Winter Associates,
SWA,
U.S. Department of Energy,
DOE
Description
Document with information about the most practical methods to achieve whole-wall performance of R-30 or above.
Publication Date
·
Author(s)
Arena Lois,
Williamson Jim
·
Organization(s)
Consortium for Advanced Residential Buildings,
CARB,
Steven Winter Associates,
SWA,
National Renewable Energy Laboratory,
NREL
Description
Report documenting actual energy savings of a retrofit project in Boulder, CO.
Publication Date
·
Author(s)
Faakye Omari,
Arena Lois,
Griffiths Dianne
·
Organization(s)
Consortium for Advanced Residential Buildings,
CARB,
Steven Winter Associates,
SWA,
National Renewable Energy Laboratory,
NREL
Description
Research study exploring a test method measuring air leakage between units through common surfaces and air infiltration across exterior, noncommon surfaces of the enclosure.
Publication Date
·
Author(s)
Federal Emergency Management Agency
·
Organization(s)
FEMA
Description
Database describing FEMA preparedness webinars including natural hazard preparedness.
Publication Date
·
Author(s)
Federal Emergency Management Agency,
American Red Cross
·
Organization(s)
FEMA,
American Red Cross
Description
Fact sheet describing how to prepare for a natural disaster and assemble a disaster supply kit.
Publication Date
·
Author(s)
Wisconsin Focus on Energy
·
Organization(s)
Wisconsin Focus on Energy,
ENERGY STAR
Description
Fact sheet from Wisconsin Focus on Energy explaining how to prevent future ice dams on homes by learning about their formation and mitigation of contributing factors.
Publication Date
·
Author(s)
Florida Department of Business & Professional Regulation
·
Organization(s)
Florida Department of Business & Professional Regulation
Description
Database of approved products that meet the requirements of the High Velocity Hurricane Zone.
Publication Date
·
Author(s)
IBHS DisasterSafety
·
Organization(s)
IBHS
Description
List of recommendations from IBHS on how to protect homes from ice dam formation.
Protecting Windows and Openings in Buildings - Hurricanes Irma and Maria in Puerto Rico, FEMA PR-RA5
Publication Date
·
Author(s)
Federal Emergency Management Agency
·
Organization(s)
FEMA
Description
Recovery Advisory document provide guidance related to the use and installation of opening protection systems to protect glazed openings (windows) from wind-borne debris during high-wind events.
Publication Date
·
Author(s)
Federal Emergency Management Agency
·
Organization(s)
FEMA
Description
Technical fact sheet describing the selection and installation of storm shutters and impact-resistant glazing and other types of opening protection in windborne debris regions; also published in FEMA P-499 “Home Builder’s Guide to Coastal Construction: Technical Fact Sheet Series.”
Publication Date
·
Author(s)
Steven Winter Associates,
Consortium for Advanced Residential Buildings
·
Organization(s)
CARB,
SWA
Description
Information sheet about how to reduce thermal bridging in walls.
Publication Date
·
Author(s)
Simpson Strong Tie
·
Organization(s)
Structural Engineering Blog
Description
Article describing how structural screws can be used to provide resistance to wind uplift in buildings.
Publication Date
·
Author(s)
Home Innovation Research Labs,
National Association of Home Builders
·
Organization(s)
HIRL,
NAHB
Description
Fact sheet describing design and construction practices to reduce the likelihood of water intrusion in walls and foundations in residential construction.