Library

Article providing guidance for installing manufactured stone veneer, including information on rainscreens.

Website providing information about Knauf Insulation.

Website describing the wildland-urban interface code and providing links to resources.

Website describing best practices for minimizing exposure to lead while doing repairs and renovations in homes built in 1978 or earlier.

Test results used by multiple structural insulated panel manufacturers confirming a one-hour fire rating for specific SIP assemblies.

Guide for homeowners describing actions they can take to modify their home and the surrounding site to create a survivable space to reduce the amount of damage a home would likely experience during a wildfire.

Article describing lessons for builders and changes to local building code in Colorado Springs in response to regional wildfires.

Report on the impact of air sealing between the foundation and the living space on radon transport reduction across the foundation and living space floor assembly at fifteen home.

A webpage outlining CAL FIRE’s recommendations for creating defensible space.

Web article describing many ways homeowners, contractors, and builders can make homes more resistant to hurricanes, tornadoes, high winds, floods, and hail.

Webpage featuring hundreds of illustrations of masonry construction details for brick, congrete, stone, tile, stucco, etc.

Siding installation guide for Ply Gem Siding Group products.

Report on two approaches to retrofitting existing double-stud walls.

Report describing a deep energy enclosure retrofit solution for insulating mass masonry buildings from the interior.

Measure Guideline research report providing simple, long term, and durable solutions when using tapes and flashing membranes in conjunction with the exterior face of rigid polymeric foam sheathing to create the drainage plane of a wall system.

Report describing wall assemblies that use layers of rigid exterior insulation thicker than 1-½ inch and require a secondary cladding attachment location exterior to the insulation.

Information sheet providing information on installing Rigid XPS foam board insulation to existing brick masonry walls.

Report summarizing the importance of properly insulating and air sealing masonry walls, providing step by step instructions and approaches.

Report describing the use of mineral fiber insulating sheathing in a high performance enclosure retrofit package.

Document providing renovators and retrofit contractors an overview of considerations when including wall air sealing and insulation in an energy retrofit project.

Report covering the fundamental waterproofing strategies for tub and shower assemblies.

Study investigating measured cooling energy savings from the installation of wall finishes with higher solar reflectance.

FEMA mitigation assessment team report following Hurricane Charley in Florida including observations, recommendations, and technical guidance for retrofitting hurricane-damaged homes.

FEMA mitigation assessment team report following Hurricane Ivan in Florida and Alabama including observations, recommendations, and technical guidance.

FEMA Mitigation Assessment Team Report describing damages from Hurricane Michael in Florida in Oct. 2018 and recommendations for future hurricane preparedness.

Report providing a resource that communities can use to identify and evaluate a range of potential mitigation actions for reducing risk to natural hazards and disasters.

Report describing the work conducted for high performance hybrid assemblies.

Report providing extensive guidance on controlling moisture in building envelopes through proper selection and installation on air, water, thermal, and vapor barriers.

Report explaining moisture-related concerns for high R-value wall assemblies and discusses past Building America research work that informs this study.

The next generation of building enclosures is a key step toward achieving high-performance goals through decreasing energy load demand and enabling advanced space-conditioning systems. Yet the adoption of high-R enclosures and particularly high-R walls has been a slow-growing trend because...

Report describing evaluation of several configurations of wall assemblies to determine the accuracy of moisture modeling and make recommendations to ensure durable, efficient assemblies.

Report on a study monitoring moisture conditions of double-stud wall assemblies with different insulation in Devens, Massachusetts.

Report detailing a three-winter study on unvented roof assemblies in a cold climate, assessing insulation material, ridge diffusion vent presence, vapor control membranes, relative humidity, and interstitial airflow. Results indicate that utilizing air-permeable fibrous fill insulations in unvented...

Report detailing a three-winter study on unvented roof assemblies in a cold climate, assessing insulation material, ridge diffusion vent presence, vapor control membranes, relative humidity, and interstitial airflow; results indicate that utilizing air-permeable fibrous fill insulations in unvented...

Report providing guidance to air-sealing multifamily homes.

Information sheet with nail withdrawl capacities in OSB.

National Fire Protection Association website.

Report updating and expanding on a 2005 study that found, among other things, that every $1 of natural hazard mitigation funded by FEMA between 1993 and 2003 saved the American people an average of $4 in avoided future losses.

Report describing the interactions, both positive and negative, between common green building practices and the robustness of residential buildings to withstand natural hazards.

Report for local governments, planners, emergency managers, developers, insurers, and property owners describing ways to improve the wildfire resistance of buildings, infrastructure and communities in the wildland urban interface.

An NFPA Standard that identifies a method for determining the minimum water supply necessary for structural fire-fighting purposes in areas where it has been determined that there is no water or inadequate water for fire fighting.

NFPA standard for design and installation of indoor automatic fire sprinkler systems.

NFPA standard for indoor automatic fire sprinkler design and installation, focused on residential dwellings.

NFPA standard for indoor automatic fire sprinkler design and installation for low-rise residential occupancies.

An NFPA standards document that provides minimum requirements for the design, construction, installation, and maintenance of tanks and accessory equipment that supply water for private fire protection.

An NFPA standard for inspection, testing, and maintenance of fire sprinklers, including fire pump operation and flow tests, evaluation techniques such as sprinkler inspections, valve status tests, internal piping assessments, and forward flow tests for backflow preventers, and water storage system...

This standard provides a benchmark for safe electrical design, installation, and inspection to protect people and property from electrical hazards and has been adopted in all 50 states.

Standard establishing criteria for levels of health care services or systems based on risk to the patients, staff, or visitors in health care facilities to minimize the hazards of fire, explosion, and electricity.

A nine-part fact sheet covering a variety of common questions surrounding wildfires and how to make a home more resilient to wildfires.

Document about development of models for evaluating thermal performance of walls in existing homes that will improve the accuracy of building energy simulation tools when predicting potential energy savings of existing homes.