Library

Report considers a number of promising wall systems that can meet the requirement for better thermal control.

Report providing a summary of key lessons learned from the first ten years of the Building America program and also included a summary of the future challenges that must be met to reach the programs long term performance goals.

Presentation about advanced framing techniques.

Article describing the control layers (air, thermal, and vapor barriers) needed to build homes successfully in very cold locations.

Document containing recommendations on how to brace roofs and gable end walls based on lessons learned from analyzing the destruction from hurricane Andrew.

Website providing information about building plans for the ENERGY STAR thermal bypass checklist.

An online learning management resource for the construction community.

Report describing findings from a multifamily test home focusing on the combination of energy measures that are feasible, affordable and suitable for multifamily construction in cold climates.

California State Code of Regulations, Title 16, Division 8, Article 3, listing requirements for plumbing contractors.

Catalog describing FEMA earthquake-resistant construction resources.

Website providing disaster preparedness information and resources for residents and building owners in locations susceptible to earthquakes.

Report about City of Meriden Housing Authority's (MHA) collaboration with Jonathon Rose Companies to complete a gut renovation of 126 residential units in the Chamberlain Heights retrofit project.

Case study characterizing the framing factors for the exterior walls, ceilings, and floors of 180 wood-framed low-rise residential buildings across the United States.

News article from SFGate explaining and giving figures on how chimney failure is the most common type of damage to homes during an earthquake.

Article describing correct ways to attach rigid insulation to the exterior of commercial and residential buildings.

Installation manual for installing metal panel siding.

An article illustrating common errors found in fiber cement siding installations. Many of these errors and poor flashing examples apply to siding materials beyond fiber cement siding.

Attachment or installation of foundations, floors, roofs, insulation, utilities, and finishes to concrete masonry walls as well as on special tools and fasteners available for use with concrete masonry.

Report covering insulating crawlspaces.

Article describing the process of constructing concrete walls

Article about how mortar droppings during the installation of a brick veneer can clog the weep holes in the wall assembly causing moisture damage. The article also illustrates products that can be installed in the ventilated cavity to mitigate this problem.

Part I of the Guide addresses walls constructed with 2x6 wood frame studs, wood structural panel (WSP) sheathing as exterior sheathing, gypsum board as interior sheathing, and a cladding system installed over WSP sheathing in low-rise residential buildings up to three stories in height.

The Guide addresses walls constructed with 2x4 wood frame studs, wood structural panel (WSP) sheathing as wall bracing and added backing for foam sheathing, a layer of rigid foam sheathing insulation up to 1.5 in. thick over the WSP, and a cladding system installed over the foam sheathing in low...

Job Process sheet for the manufactured housing industry showing how to cut insulation batts to fit wall cavities in a factory production environment.

Report covering exterior energy retrofits of masonry buildings.

FEMA risk management series guide on hospital safety and resilience to natural disasters.

Conference paper describing the use of engineered rainscreen products to provide air flow and water drainage space in wall assemblies in residential and commercial buildings.

Article from The Home Energy Community of Practice on designing energy efficient homes in hot climate zones, including home orientation, window location, and roof design considerations.

Report explaining the principles of seismic design to architects.

Report identifying codes and standards that embody the concepts of resiliency.

Information sheet providing information about investigating the thermal effect of staggering the inner and outer wall studs on double walls in new construction.

Report covering the rainwater performance of building assemblies.

A quick guide from the California Division of the State Architect (DSA) explaining the three types of gas shutoff devices to stop the flow of natural gas into buildings in the event of an earthquake or rupture of the gas line.

Designer checklist covering hazards involving ground and surface water, rain and water vapor, HVAC and plumbing, sunlight, insects, decay, and natural hazards, and builder checklist covering all disaster resistance, sorted by building component.

Report on how airtighness changes as houses age.

Factsheet describing how to secure refrigerators and other major appliances to wall studs using earthquake appliance straps or angle brackets and bolts.

Factsheet describing how to secure televisions, microwaves, computers, and other electronics to prevent damage during earthquakes.

Factsheet describing how to secure water heaters to resist seismic activity.

FEMA guide containing recommendations on how to implement cost-effective measures that can help to reduce the potential hazards associated with earthquakes.

Poster describing earthquake safety tips and protection measures to take at home.

A book describing how to complete an earthquake retrofit plan for wood-frame residential buildings.

Factsheet describing ways to retrofit a home to make it more earthquake resistant.

Webpage providing earthquake safety tips including proactive home structure and utility action items.

Guide provides homeowners ways to prepare for an earthquake and protect a home against earthquake damage.

Reference guide helping families prepare for an earthquake and prevent earthquake-related damage.

A one-page fact sheet outlining the purpose of an earthquake valve and how the valve can stop gas from flowing into a residence or building.

Standard providing minimum functionality requirements for earthquake-actuated automatic gas shutoff devices; applicable to systems carrying natural gas and propane, the devices are used in piping, equipment, and appliances typically found in structures of three stories or less.

Report providing an introduction to the NEHRP recommended seismic provisions for new buildings and other structures.

Website describing what to do for safety in an earthquake and other types of disasters.

Factsheet describing methods for securing HVAC units to avoid damage during an earthquake.