Library

Report providing information on performance of mortars and concrete containing PCMs.

Information sheet providing guidance about the placement of ventilation approaches.

Blog article describing considerations for how to use trees for shading to reduce cooling energy demand.

City of Plymouth webpage providing information on the Plymouth Community Center Project.

Large scale simulation study investigating the effects of cool roofs and walls on buildings of various vintages across the U.S., with special attention given to California.

Report reviewing the design and the first four months of energy performance of a near zero energy project home in Callaway, Florida during the second half of 2008.

Report reviewing the design of a net zero energy home in Gainesville, Florida and then focusing on the first six months of energy performance of the project home during the second half of 2008.

Database describing FEMA preparedness webinars including natural hazard preparedness.

Fact sheet describing analysis of potential heating and cooling savings from radiant barriers in attics.

Searchable database of over 3,000 roofing products that have undergone solar reflectance and thermal emittance testing.

Searchable database of wall cladding and coating products that have undergone solar reflectance and thermal emittance testing.

Document reviewing ventilation strategies for different climate zones that also includes schematic drawings and photographs of various ventilation installations.

This study used an advanced airflow, energy and humidity modeling tool to evaluate the potential for residential mechanical pre-scooling strategies to reduce peak electriciy demand.

Guidance document describing urban heat islands, what they are, how they form, why we care, and including some strategies to reduce them.

Article describing moisture and ice dam issues in attics and how to air seal the attic floor.

Technical report describing the research and development of the Ventilation-Integrated Comfort System (VICS) which is a specifically designed, energy-efficient solution that seamlessly integrates with low-capacity, ducted heating, and cooling systems, offering controllable, balanced energy recovery...

A free tool used to calculate the required minimum flow rate of dwelling-unit ventilation.

IECC code note explaining new fan efficacy requirements, along with how to determine which fans are affected by the new fan requirements.

Report describing a study using parametric computer simulations of 112 single-family and 63 multi-family residential building prototypes to quantify the contributions of building components such as roofs, walls, windows, infiltration, outside air, lighting, equipment, and people to the aggregate...

Report providing guidance on indoor air quality in single-family and multifamily housing for designers, builders, property managers, homeowners, buyers, and renters.

Document reviewing current and potential ventilation technologies for residential buildings with particular emphasis on North American climates and construction.

Q&A article discussing how to address moisture issues in an attic in a wet and humid coastal climate.

Webpage discussing the characteristics of sunlight and how cool roofs work to reduce solar heat gain.

Report on hybrid ventilation methods for insulated and sealed crawl spaces.

Website tool that can search for trees by name or characteristics and retrieve data describing tree attributes including site preferences and general characteristics and considerations.

Report describing development of a package of energy efficiency measures to achieve 60% energy savings in a test house.

Technical report providing site selection guidance for installation of small wind turbines.

Fact sheet describing field validations of a smart ventilation system to assess its effectiveness in assisting low-load homes in humid environments by maintaining acceptable indoor humidity conditions while ensuring adequate ventilation and indoor air quality.

Article describing building smoke control systems.

Document providing incident solar radiation data and window overhang sizing guidance for multiple locations across the U.S.

Spreadsheet tool that computes solar reflectance index (SRI) and roof surface temperature based on solar reflectance and thermal emittance using ASTM standard E 1980.

Standard that defines the roles of and minimum requirements for mechanical and natural ventilation systems and the building envelope intended to provide acceptable indoor air quality in low-rise residential buildings. This version of the standard was published in the year 2016, and is available for...

Standard that defines the roles of and minimum requirements for mechanical and natural ventilation systems and the building envelope intended to provide acceptable indoor air quality in low-rise residential buildings; published in the year 2019, and is available for preview and purchase at the...

Standard that describes the minimum requirements for residential buildings to achieve acceptable indoor air quality via dwelling-unit ventilation, local mechanical exhaust, and source control. This version of the standard was published in the year 2022, and is available for preview and purchase at...

This Standard provides a consistent, uniform methodology for evaluating the airtightness of building envelopes and heating and cooling air ducts and the air flows of mechanical ventilation systems.

Standard describing methods for testing the airtightness of buildings and HVAC equipment.

Test method that measures the capture efficiency of wall-mounted domestic range hoods under controlled conditions in a test chambers which available for preview and purchase at the link and was published in the year 2018.

Paper describing landscaping influences on heat gain through shading, infiltration shielding, and microclimate creation for nearby buildings.

Paper describing case studies on urban vegetation and greenways and their impacts on city climate and building performance.

Presentation on sustainable development including water conservation, passive solar, daylighting, natural ventilation, and land use.

Presentation by the Washington University in St. Louis Office of Sustainability on saving energy.

Presentation on urban land use and sustainable building design.

Study on the effects of wind, radiation, and pressure on apparent temperature.

Presentation describing how to make a Corsi-Rosenthal Box for air cleaning.

Study comparing the thermal performance of phase change materials to concrete construction during heat waves.

Article describing a field study that test ventilation performance in nine homes and found current ventilation was inadequate to remove PM2.5 and CO2 levels; however, a directly exhausting range hood can reduce peak PM2.5 concentrations by 75% or more.

Document describing the impacts of tree cover on property values.

Article from Green Building Advisor on the importance of window selection in hot climates, with an emphasis on window glazing.

Paper that illustrates a performance check between the thermal performance of a Massive Insulating Concrete Form (ICF) wall system mocked up and Whole Building Performance criteria such as total space heating and cooling loads (thermal comfort).

Article about installing balanced ventilation systems.