Library

Standard describing methods for testing the airtightness of buildings and HVAC equipment.

Guide describing the installation of windows in walls that have foam plastic insulating; guide provides several methods for attaching, supporting, and flashing windows in walls with rigid foam sheathing. (Note: The link only goes to the table of contents for the guide, the full guide can be...

Standard that covers the minimum performance and acceptance criteria for an air barrier (AB) material or system for framed walls of low-rise buildings with the service life of the building wall in mind. This link directs to a preview of the current version of the standard, published in the year 2019...

Standard that covers the minimum performance and acceptance criteria for an air barrier (AB) material or system for framed walls of low-rise buildings with the service life of the building wall in mind. This link directs to a preview of the version of the standard that was published in the year 2011...

Specification covering the standard requirements for application of full thickness Portland cement-based plaster for exterior (stucco) and interior work. This standard was produced in the year 2022, and is available for preview and purchase at the reference link. There are also other versions of...

Specification covering the standard requirements for application of full thickness Portland cement-based plaster for exterior (stucco) and interior work. This standard was produced in the year 2023, and is available for preview and purchase at the reference link. There are also other versions of...

A specification covering the application of Insulating Concrete Forms (ICFs) that act as permanent formwork for cast-in-place reinforced concrete beams & walls which was published in the year 2022 and is available for preview and purchase at the reference link.

Specification describing criteria for manufactured polymeric materials used to provide a rainscreen function, a means for the drainage of liquid moisture and the ventilation of vapor moisture that enters an above-grade exterior wall assembly which was published in the year 2019, and is available for...

Test method designed to calculate an assigned air permeance of flexible sheet or rigid panel-type materials at a reference air pressure differential of 75 Pa which was published in the year 2021 and is available for preview and purchase at the reference link.

Test method providing a rapid means of determining the steady-state thermal transmission properties of thermal insulations and other materials with a high level of accuracy when the apparatus has been calibrated appropriately. This version of the standard was published in the year 2021 and is...

ASTM standard test method for surface burning response of different building materials which was published in the year 2022 and is available for preview and purchase at the reference link.

ASTM standard test method for testing the surface burning response of different building materials which was published in the year 2023 and is available for preview and purchase at the reference link.

Standard that describes the principles for the design of a hot box apparatus and the minimum requirements for the determination of steady state thermal performance of building assemblies when exposed to controlled laboratory conditions. The current version of the standard was published in 2019, and...

Test method designed to obtain reliable values for the WVTR of plastic film and sheeting which was published in the year 2020 and is available for preview and purchase at the reference link.

Report intending to provide useful information as the DOE/BA develops and implements comprehensive communications and outreach strategies for demonstration homes.

Document explaining the benefits of evaluating and identifying energy efficiency retrofit measures that could be made during renovation and maintenance of multifamily buildings.

Report covering coating and back venting wood based claddings and trim.

Conference paper describing testing of the performance of fasteners used to attach rigid foam insulation to the exterior of walls.

Information sheet describing correct application of stucco.

Document describing issues of wind pressure resistance in walls with exterior rigid foam sheathing installed directly over framing members.

Report evaluating a test home built in Atlanta, GA in the mixed-humid climate zone. The report outlines the features of the house, discusses the implementation of the energy efficient design, and presents the results of short-term characterization testing.

A guide for homeowners on determining the risks from tornadoes and hurricanes and selecting a safe room type and location, as well as providing detailed plans for safe room construction.

Document about NREL's repository of residential building characteristics and historical energy use data, used to improve accuracy of residential energy analysis tools.

A story about bees building a hive in the drainage plane behind the brick veneer siding. The bees entered the wall through unprotected drainage holes.

Image depicting damage from termites in weatherboard cladding.

Report using data from various sources to characterize the impact on human health and property damage from indoor environmental quality and other hazards.

FSEC certification and testing page for solar systems.

Projectile missile testing of various wall panel configuration to understand how the different wall constructions would perform when struck with wind driven debris from a hurricane.

Case study of new home construction in the hot-dry and mixed-dry climate zones.

Article describing the perfect wall and and in what order to control rain, air, vapor, and heat.

Article describing thermal bridging, construction practices that encourage thermal bridging, and solving thermal bridging through continuous exterior insulation.

Research study investigating the thermal efficiency of fasteners, namely drywall screws and siding nails, in high-performance wood-framed walls.

Report proposing a procedure for estimating the whole opaque wall R-value (whole-wall R-value), independent of system type and construction materials.

Article describing the evolution of the IRC to permit class 3 vapor retarders (latex paint) in walls coupled with exterior continuous insulation to allow drying and reduce condensation risk.

Research study describing a detailed 3D computational fluid dynamics model that evaluates the thermal performance of uninsulated wall assemblies.

Technical conference paper discussing real world experience with Trombe walls.

Report addressing the ever increasing percentage of whole house energy use that is attributable to miscellaneous electricity loads (MELs) and major appliances.

Technical fact sheet highlighting important building connections and illustrating the proper use of various types of connection hardware; also published in FEMA P-499 “Home Builder’s Guide to Coastal Construction: Technical Fact Sheet Series.”

Report about a project with successful integration of numerous energy-conservation and renewable-energy features into a beautiful, comfortable, and very energy-efficient off-grid home.

Report summarizing NRELs efforts to develop diagnostic test cases to conduct accurate energy simulations when phase change materials (PCMs) are modeled in residential buildings.

Document describing the measured annual performance data from 12 recent-vintage very low energy homes in the US.

Publication with installation guidance for vinyl siding.

Document describing wall bracing techniques and suggestions for the city of Verona, WI building department.

A guide describing how to do wall bracing calculations and evaluations.

A presentation about the need for rainscreens including the damage water and moisture ingress into a home’s siding and framing can cause, and ways to design a resilient wall that drains and ventilates well.

An article written by Don Jackson of The Journal of Light Construction on how to detail brick veneer siding wall.

Report assessing the performance and cost-effectiveness of a zero net energy community project in Davis, CA.

Web page explaining what a cool exterior wall is and how they work, as well as benefits to their use and links to research studies.

An article describing a way to protect drain and ventilation holes in brick veneer siding against pests. Selecting a fine screen mesh opening (1/55-inch or 0.5-mm) is important to guard against small insects such as subterranean termites.

Factsheet describing the importance of system charging, superheat and subcooling.