Library

Report describing an air distribution system composed of a series of uniformly-sized ducts that terminate in rooms throughout the home and return to a central manifold, similar in fashion to a “home-run” cross-linked polyethylene plumbing system.

Report describing two retrofit duct sealing techniques - manually-applied sealants and injecting a spray sealant, that were implemented in several low-rise multi-unit buildings in North Carolina.

Document providing guidance to U.S. home builders who want to accept the challenge.

Document about testing software predictions of retrofit energy savings in existing homes.

Document providing an example procedure for establishing acceptance-range criteria to assess results from software undergoing BESTEST-EX.

Report summarizing the key opportunities, gaps, and barriers identified by the national laboratory white papers discussing long-term 50% energy reduction goals.

Report on the stability of furring strips as a means for cladding attachment over walls with thick exterior rigid insulation.

Research study investigating the energy performance and cost effectiveness of several state-of-the-art retrofit strategies that could be used in residential houses in the Boston and New England area.

Report about instrumentation and limited short-term testing completed on a retrofit unoccupied test house in Fresno, California.

Research study comparing various retrofit models in Wisconsin to evaluate performance in terms of savings per home and program cost per home to assess the relative cost effectiveness of each program design.

Part I of the Guide addresses walls constructed with 2x6 wood frame studs, wood structural panel (WSP) sheathing as exterior sheathing, gypsum board as interior sheathing, and a cladding system installed over WSP sheathing in low-rise residential buildings up to three stories in height. Walls with...

The Guide addresses walls constructed with 2x4 wood frame studs, wood structural panel sheathing (WSP) as wall bracing and added backing for foam sheathing, a layer of rigid foam sheathing insulation up to 1.5 inches thick over the WSP, and a cladding system installed over the foam sheathing in low...

Part I of the Guide addresses walls constructed with 2x6 wood frame studs, wood structural panel (WSP) sheathing as exterior sheathing, gypsum board as interior sheathing, and a cladding system installed over WSP sheathing in low-rise residential buildings up to three stories in height.

Report exploring alternative methods to find long-term solutions to energy loss in 1 ½-story homes to save energy, improve comfort, prevent frost buildup on the underside of the roof deck, and reduce the risk of ice dam formation/reformation.

Report focusing on building envelopes that have been enhanced with phase change materials (PCMs), which can simultaneously reduce total cooling loads and shift peak-hour loads.

Job Process sheet for the manufactured housing industry showing how to cut insulation batts to fit wall cavities in a factory production environment.

Research study evaluating energy savings and cost effectiveness of installing low-emissivity (low-e) storm windows over existing windows in residential homes in all climate zones.

Guidance document on deep energy retrofits.

Part of a larger LBNL report (Deep Energy Retrofit Guidance for the Building America Solutions Center), the Occupant Behavior chapter discusses how to assess homeowner behavior patterns and use these patterns to enhance overall energy savings.

Part of a larger LBNL report (Deep Energy Retrofit Guidance for the Building America Solutions Center), the Over Time, Phased Guidance chapter presents a phased approach to deep energy retrofits.

Report describing the progress toward and issues related to developing a usable, standardized, empirical data-based software accuracy test suite.

Report identifying business models for the remodeling industry that foster remodelers adoption of energy efficiency services.

Journal article presenting a discussion of the state-of-the- art in electricity management in smart homes, the various enabling technologies that will accelerate this concept, and topics around consumer behavior with respect to energy usage.

Research study examining efficiency retrofit opportunities, typical renovation practices, and pathways for achieving U.S. Department of Energy (DOE) goals for existing homes in Florida.

Study investigating homeowner measure package choices in the Illinois Home Performance with ENERGY STAR program compared to cost-optimal choices determined through Building Energy Optimization (BEopt) modeling software.

Technical report describing the evaluation of four different ventilation strategies for providing make-up air in high-performance, new construction multifamily buildings in the Northeast, emphasizing the challenges posed by increasing airtightness standards and the variability of system performance...

Report describing a project focused on the use of home energy ratings as a tool to promote energy retrofits in existing homes.

Report on the field evaluation of whole-building approaches and estimation of the relative contributions of select technologies toward reducing energy use related to space conditioning in new manufactured homes.

Report describing a simple and general way to generate House Simulation Protocol (HSP)-consistent internal sensible and latent loads in unoccupied homes.

Research report assessing the moisture and cooling load impacts of airtightness and mechanical ventilation in homes in hot-humid climates.

Report detailing field walk-through evaluations, energy simulations for projected savings with exterior insulation upgrades, building envelope energy improvement cost estimates, and installation and maintenance of monitoring equipment and data.

Research report presenting results of short term tests on measures used in an energy efficiency retrofit project in California.

Research study describing field testing performed in 32 two-story Florida homes to characterize wind washing failures of the house air and thermal boundary.

Report using a field test plan to evaluate the success of implementing energy efficiency upgrades at the community scale incorporating whole-house systems integrated measures package (SIMP).

Measure Guideline describing how to assess and carry out the isolation of natural draft combustion appliances from the conditioned spaces of low-rise residential buildings.

This measure guideline provides guidance on combustion safety inspection procedures for appliances and heating equipment that use indoor air for combustion and dilution of flue gases in low-rise residential buildings.

Report describing an analysis method for determining optimal residential energy efficiency retrofit packages and applies the analysis method to a 1960s-era home in eight U.S. cities.

Report providing extensive guidance on controlling moisture in building envelopes through proper selection and installation on air, water, thermal, and vapor barriers.

The next generation of building enclosures is a key step toward achieving high-performance goals through decreasing energy load demand and enabling advanced space-conditioning systems. Yet the adoption of high-R enclosures and particularly high-R walls has been a slow-growing trend because...

Document about development of a new test procedure to increase the quality and accuracy of energy analysis tools for the building retrofit market.

Report highlighting the evaluation methods used and extent of wind washing found in a study analyzing wind washing in thirty-two two-story homes.

Report presenting performance results from tests conducted on an energy efficiency retrofit project in Stockton, California.

Report briefly reviewing past research on the effects of occupant behavior on residential energy use and then covering a two year pilot evaluation of a low cost residential energy feedback system installed in twenty case study homes in Florida.

Report briefly reviewing past research on the effects of occupant behavior on residential energy use and then covering a two year pilot evaluation of a low cost residential energy feedback system installed in twenty case study homes in Florida.

Report designed to help a builder understand quality management and its role in transitioning from conventional to HPH building and remodeling.

Research project aimed to verify whether homes in the New Jersey HPwES program achieved 30% source energy savings, and if so, what measures were implemented to achieve them.

Report summarizing the results of laboratory testing of 20 advanced power strip products.

Report about a tool developed to enable users to compare a typical 1970s ranch home against an IECC 2009 code-compliant home of the same configuration and against the 70s base case plus retrofits.

Report summarizing commissioning, short-term testing, and analysis that occurred before, during, and just after the actual retrofit of the Bay Ridge project.