Library

Report describing the results of a field study of five different ventilation system types in 29 homes in the Pacific Northwest.

Technical report describing the SPS (Structural Panel System), an innovative implementation of the "perfect wall" concept, situating environmental control layers on the exterior side of structural components for improved constructability, cost-effectiveness, and performance, validated through the...

Standard covering updates to the expected leakage rates for ductwork constructed to the SMACNA HVAC Duct Construction Standards—Metal & Flexible, duct leakage test procedures; includes recommendations on use of leakage testing, types of test apparatus, and test setup and sample leakage analysis.

Webpage providing mapping tool for obtaining ground snow load, based on ASCE 7-10, for any location in the contiguous United States, with the exception of locations requiring a case study due to extreme local variations in ground snow loads. Fee required for some data.

Standard establishing test methods for determining air leakage in duct systems using fan pressurization in low-rise residential and commercial buildings.

California Office of the State Fire Marshal's homepage for the Building Materials Listing Program, providing builders, contractors, architects, and others with access to a database of fire alarm systems and fire-resistant construction materials including roof coverings, wall, ceiling, and floor...

California Office of the State Fire Marshal's compiled and searchable list of different building materials and their test results for fire resistance.

Web article describing utility customer’s right to use back-up generators during emergency events, including Public Safety Power Shutoffs (PSPS).

Report recording the results of a field study conducted in a single historic home in Seattle, Washington, to document the performance of Indow Windows' interior storm window inserts.

Document discussing moisture considerations and testing techniques for concrete floors.

Article describing the importance of air sealing, insulation, and roof ventilation in reducing the likelihood of ice dam formation on roofs in cold snowy climates.

Webpage explaining what causes the formation of ice dams on roofs and steps to take to prevent them.

The objective of this research was to quantify the field performance of wood-frame walls clad with a variety of common claddings in a mixed-humid climate.

Presentation about results from an insulating concrete form energy efficiency study in Knoxville, TN.

Research study simulation adapting and applies the general framework described in Building Energy Simulation Test for Existing Homes for self-testing residential building energy model calibration methods.

Article describing a study of the potential to use heat pumps to heat and cool homes across the United States, including cold climate locations like Alaska.

Technical report detailing the vulnerabilities of the U.S. electric grid to weather-related failures.

Fact sheet providing an overview of how to properly prepare for a winter storm and how to protect yourself before, during, and after one.

Website with prepopulated information about the United States renewable resources.

Report describing the use of fresh air ventilation systems to eliminate the formation of icicles and ice dams along the eaves of roofs.

Report describing a laboratory assessment that provides insights into space requirements and venting strategies for heat pump water heaters (HPWH) to enhance retrofit installations and provide actionable guidance for manufacturers, designers, engineers, installers, and owners.

Report discussing the potential energy savings of new high-efficiency downlights, and the results of product testing to date.

Report sumarizing results of an ICF investigation of side-by-side houses in Knoxville, Tennessee.

Website blog with guidance about calculating heat-loss.

Correcting pressure imbalances in your HVAC system can result in a healthier, more efficient home.

Report describing the results of a 21-home field study investigating the effectiveness and failure rates of whole-house mechanical ventilation systems installed in Florida homes over the last 15 years.

Report describing research conducted to support California’s Title 24, Part 6 Building Energy Efficiency Standards by analyzing the impact of installation location and ventilation on heat pump water heater (HPWH) performance, emphasizing the need for proper installation to maximize efficiency...

Factsheet describing how to test the duct leakage of a manufactured home in the manufactured home factory.

Repor ourlining testing results from a 53 home monitored sample, long-term energy use of electric resistance clothes dryers.

Report describing a lighting and smart power strip retrofit evaluation that was conducted on 56 all-electric, existing Florida homes to see how lighting and miscellaneous electric loads might be reduced.

Standard that prescribes a testing method to determine the efficiency of space heating and/or cooling thermal distribution systems under seasonal and design conditions. This version of the standard was published in the year 2014, and is available for preview and purchase at the reference link. The...

Paper examining the monitored performance of four newly constructed near zero energy homes in Florida.

Database describing FEMA preparedness webinars including natural hazard preparedness.

Webpage describing steps homeowners can take to prepare their home and car for winter storms.

Webpage explaining how to mitigate heat loss through roofs for ice dam prevention.

Paper covering a parametric study of foundation heat exchanger-based ground source heat pump systems for several house configurations in a range of European locations, with an emphasis on determining feasible combinations.

Research report detailing Florida Solar Energy Center (FSEC) partnership with Manatee County Habitat for Humanity to design a compact, Zero Energy Ready Home in Florida, tackling challenges like equipment sizing and indoor air quality, offering insights for projects surpassing building code...

Manual that identifies certain leakage limits for ducts and outlines procedures for testing ducts for conformity with air leakage limits that are set forth in a designer’s project specification.

Guide providing detailed explanations of the snow load provisions contained in Standard ASCE/SEI 7-16: Minimum Design Loads and Associated Criteria for Buildings and Other Structures.

The website by U.S. Department of Agriculture’s Natural Resources Conservation Service (NRCS) National Water and Climate Center tracks snowpack sensor stations at multiple sites across the country providing an interactive US map of snow loads.

Standard describing methods for testing the airtightness of buildings and HVAC equipment.

Test method designed to calculate an assigned air permeance of flexible sheet or rigid panel-type materials at a reference air pressure differential of 75 Pa which was published in the year 2021 and is available for preview and purchase at the reference link.

Test method providing a rapid means of determining the steady-state thermal transmission properties of thermal insulations and other materials with a high level of accuracy when the apparatus has been calibrated appropriately. This version of the standard was published in the year 2021 and is...

ASTM standard test method for surface burning response of different building materials which was published in the year 2022 and is available for preview and purchase at the reference link.

ASTM standard test method for testing the surface burning response of different building materials which was published in the year 2023 and is available for preview and purchase at the reference link.

Standard that describes the principles for the design of a hot box apparatus and the minimum requirements for the determination of steady state thermal performance of building assemblies when exposed to controlled laboratory conditions. The current version of the standard was published in 2019, and...

Test method designed to obtain reliable values for the WVTR of plastic film and sheeting which was published in the year 2020 and is available for preview and purchase at the reference link.

Article describing suggested food supplies, sanitation, safety, and cooking for during and after an emergency.

FSEC certification and testing page for solar systems.

Report proposing a procedure for estimating the whole opaque wall R-value (whole-wall R-value), independent of system type and construction materials.