Library

Report summarizing the importance of properly insulating and air sealing masonry walls, providing step by step instructions and approaches.

Report covering the fundamental waterproofing strategies for tub and shower assemblies.

Study investigating measured cooling energy savings in homes across the U.S. from the installation of roofing with higher solar reflectance.

Study investigating measured cooling energy savings from the installation of wall finishes with higher solar reflectance.

An installation training manual discussing the installation of metal roofing materials and related accessories, for both new construction and retrofit projects.

A Recovery Advisory guide reccomending practices for designing and installing metal roof systems that will enhance wind resistance in high-wind regions (i.e., greater than 90-miles per hour [mph] gust design wind speed).

This paper discusses model validation using data from three thermosiphon systems.

This report requires all elements of rooftop PV panel systems to be designed for component and cladding pressures per ASCE 7-10.

Report describing the work conducted for high performance hybrid assemblies.

Report providing extensive guidance on controlling moisture in building envelopes through proper selection and installation on air, water, thermal, and vapor barriers.

Report about exterior sheathing insulation and inward driven moisture issues.

Report explaining moisture-related concerns for high R-value wall assemblies and discusses past Building America research work that informs this study.

Document describing a hygrothermal modeling study, including all of the US climate zones, a range of interior humidity levels and numerous arrangements and types of insulation.

Brochure discussing specific practices for mitigating moisture and mold during the construction process.

Document describing common questions about moisture, mold, and wood.

Information sheet about mold mitigation.

Standard covering overs mounting systems, including mounting devices, clamping devices and ground lugs for use with photovoltaic modules and panels and contains requirements for ground-mounted and roof systems as part of a nonstructural building component.

This Photovoltaic (PV) Installer Resource Guide is an informational resource covering basic requirements for PV installations intended for individuals pursuing the Photovoltaic Installer Certification credential offered by the North American Board of Certified Energy Practitioners (NABCEP).

An article about double-hung windows.

An NFPA Standard that identifies a method for determining the minimum water supply necessary for structural fire-fighting purposes in areas where it has been determined that there is no water or inadequate water for fire fighting.

An NFPA standards document that provides minimum requirements for the design, construction, installation, and maintenance of tanks and accessory equipment that supply water for private fire protection.

Guide providing information on controlling attic ductwork sweating.

A document providing guidance on integrating a PV array with a roof system.

Website providing comparison charts and reviews of off-grid inverters for solar power systems.

Report covering wind loading on roofing assemblies.

Calculator to help in calculating pool volume.

Large scale simulation study investigating the effects of cool roofs and walls on buildings of various vintages across the U.S., with special attention given to California.

Article describing how to properly manage condensing HVAC equipment.

Website providing guidance on how to reduce the risk of damage to a home from hail.

Research report describing study of exterior retrofit approach for air sealing, insulating, and water management conducted by the NorthernSTAR Building America Partnership team run by University of Minnesota.

Case study describing the External Thermal and Moisture Management System developed by the NorthernSTAR Building America Partnership for retrofitting roofs with rigid foam over the roof deck, especially on one and a half-story homes.

Report addressing flood, wind and seismic hazards and recommends several multi-hazard resistant foundation designs of manufactured homes.

Fact sheet describing the special considerations that must be made when installing utility equipment, such as fuel, sewage, and water/sewage lines in a coastal home, and presenting recommendations for utility protection; also published in FEMA P-499 “Home Builder’s Guide to Coastal Construction...

Report aiming to "de-mystify" technology and economic considerations of residential PV systems.

Table calculating friction losses for PVC pipe by length.

Website estimating energy production and cost of energy of grid-connected photovoltaic (PV) energy systems throughout the world.

Fact sheet describing design and construction practices to reduce the likelihood of water intrusion in walls and foundations in residential construction.

Document covering basic moisture control principles in the design of above-grade building enclosures; driving rain as a moisture load on walls; a classification system of the various rain control strategies available for walls; and good design practises for walls.

Report covering the performance of residential buildings during three hurricanes impacting Florida in 2004.

Searchable database of over 3,000 roofing products that have undergone solar reflectance and thermal emittance testing.

Searchable database of wall cladding and coating products that have undergone solar reflectance and thermal emittance testing.

Document with important building science considerations, designed for members of the residential construction and remodeling industries, as well as owners and managers who work in affordable housing.

Report describing steps homeowners can take to improve the indoor air quality in their home, including ventilating, preventing pests, and reducing pollutants in the home.

Information sheet designed for the residential construction and remodeling industries, as well as owners and managers working in affordable housing. This sheet presents building guidance for both new construction and rehabilitation, as well as practices that can be used by property maintenance...

Report from FEMA on how to reduce damage from localized flooding including planning, drainage, building codes and retrofits, and regulations.

A report presenting alternative approaches for reducing the costs of roof-mounted, grid-connected photovoltaic (PV) systems.

An EPA guide describing the causes and impacts of summertime urban heat islands, promoting strategies for lowering temperatures in U.S. communities.

Data tables on U.S. renewable energy consumption and general trends in the market for renewable energy.