Library

DOE report characterizing the installed base of windows and window coverings, and how users operate window coverings in order to enable precise quantification of energy savings.

Document reviewing current and potential ventilation technologies for residential buildings with particular emphasis on North American climates and construction.

Information sheet describing solar PV upgrade for an existing homes.

Document discussing changes in testing the annual performance ratings for solar water heaters.

Q&A article discussing how to address moisture issues in an attic in a wet and humid coastal climate.

Recovery advisory guide providing guidance on existing code requirements as well as recommend best practices for attachment design, installation, and maintenance of rooftop solar panels to increase panel wind resistance in the U.S. Virgin Islands after Hurricane Maria.

Webpage discussing the characteristics of sunlight and how cool roofs work to reduce solar heat gain.

Report on hybrid ventilation methods for insulated and sealed crawl spaces.

Report describing development of a package of energy efficiency measures to achieve 60% energy savings in a test house.

Web page describing the basics of how to size and build a battery bank for electricity storage.

Paper describing the development and testing of an affordable net-zero energy house in Lenoir City, Tennessee.

Fact sheet describing field validations of a smart ventilation system to assess its effectiveness in assisting low-load homes in humid environments by maintaining acceptable indoor humidity conditions while ensuring adequate ventilation and indoor air quality.

Article describing building smoke control systems.

Website article describing the way solar panels are coupled to AC and DC battery energy storage systems.

Report providing a synopsis of a project to evaluate the performance of a roof-integrated solar water heating system.

SEIA resources page.

Tool determining the most economical and efficient photovoltaic array location and position.

Guidelines to assist builders in designing and constructing homes equipped with a set of features that make the installation of solar energy systems after the completion of the home’s construction easier and less expensive.

The Solar Rating & Certification Corporation is the leading solar heating and cooling product certification program in North America, certifying to the requirements of International and Uniform Codes and Standards

Report identifying the important aspects of building design and construction to enable installation of solar photovoltaic and heating systems at some time after the building is constructed.

A research paper exploring the design, installation, repair and maintenance of solar water and pool heating technologies.

Website describing how solar water heaters -- also called solar domestic hot water systems -- can be a cost-effective way to generate hot water for your home.

The RERH specifications and checklists take a builder and a project design team through the steps of assessing a home’s solar resource potential and defining the minimum structural and system components needed to support a solar energy system.

Outlines the minimum criteria for a solar water heating system installed by a Solar Water Heating Program trade ally under Energy Trust of Oregon’s Solar Water Heating Program.

Webpage describing the basics of solar plus storage operations on homes.

California Energy Commission report presenting the concept of cool walls and providing guidelines for their building- and climate-appropriate use to conserve energy and reduce emissions.

Handheld solar site analysis tool capturing whole-horizon images for a site and generating shading analysis reports.

Standard that defines the roles of and minimum requirements for mechanical and natural ventilation systems and the building envelope intended to provide acceptable indoor air quality in low-rise residential buildings. This version of the standard was published in the year 2016, and is available for...

Standard that defines the roles of and minimum requirements for mechanical and natural ventilation systems and the building envelope intended to provide acceptable indoor air quality in low-rise residential buildings; published in the year 2019, and is available for preview and purchase at the...

Standard that describes the minimum requirements for residential buildings to achieve acceptable indoor air quality via dwelling-unit ventilation, local mechanical exhaust, and source control. This version of the standard was published in the year 2022, and is available for preview and purchase at...

This Standard provides a consistent, uniform methodology for evaluating the airtightness of building envelopes and heating and cooling air ducts and the air flows of mechanical ventilation systems.

Standard describing methods for testing the airtightness of buildings and HVAC equipment.

Test method that measures the capture efficiency of wall-mounted domestic range hoods under controlled conditions in a test chambers which available for preview and purchase at the link and was published in the year 2018.

The 2017 publication update to the SEAOC Wind Committee and SEAOC Solar Photovoltaic Systems Sub-Committee's 2012 report.

Presentation on sustainable development including water conservation, passive solar, daylighting, natural ventilation, and land use.

Presentation by the Washington University in St. Louis Office of Sustainability on saving energy.

Presentation on urban land use and sustainable building design.

FSEC certification and testing page for solar systems.

DOE-sponsored report describing the experimental design and results of testing the energy performance of Hunter Douglas double-cell cellular shades under various control schemes in the Pacific Northwest National Laboratory’s Lab Homes.

Presentation describing how to make a Corsi-Rosenthal Box for air cleaning.

Report describing use of the Energy in Modular (EMOD) method to design, produce, and deliver affordable, net-zero energy, low-carbon, and healthier buildings through industrialized (factory) construction of modular buildings; modeling of whole buildings and subassemblies of components, pods, panels...

Article describing a field study that test ventilation performance in nine homes and found current ventilation was inadequate to remove PM2.5 and CO2 levels; however, a directly exhausting range hood can reduce peak PM2.5 concentrations by 75% or more.

Paper that illustrates a performance check between the thermal performance of a Massive Insulating Concrete Form (ICF) wall system mocked up and Whole Building Performance criteria such as total space heating and cooling loads (thermal comfort).

Article about installing balanced ventilation systems.

Website providing consumer tips for using natural gas safely in the home, including guidance on cooking, fireplaces, ventilation, pilot lights, piping, etc.

BSD-102 report providing guidance about whether to construct a vented or unvented attic based on hygro-thermal zone.

Article describing the impact of increasingly stringent ventilation standards on multifamily buildings, highlighting the inefficiencies and challenges of exhaust-only ventilation in tightly sealed enclosures, the complications of achieving balanced ventilation, and the unintended consequences of...

This study uses a computer simulation approach to examine the energy and indoor air quality implications of passive and hybrid ventilation systems.

Document presenting analysis results, focusing on relative humidity (RH) excursions, which are defined as unique events of indoor RH above a threshold.

Report on investigating the effectiveness of using solar thermal water heaters to address heat losses from piping while recirculating water in multifamily buildings.