Library

Factsheet profiling a simple modification that can be made to window air-conditioners to improve their energy efficiency.

Best Practices document providing an introduction to current photovoltaic and solar thermal building practices.

Website providing information on low-energy and standard cooling systems, with a focus on saving energy.

Web article about solar site assessment.

Article from RMI on how climate change is leading to an increase in critical extreme heat hours and what smart building strategies can be taken to mitigate some of these effects including paint color and insulation.

Report presenting construction methods, building products, appliances and equipment of four single-family houses that achieve dramatic energy reductions and approach “net zero energy” use.

Article from Washington Post on passive cooling measures for homes during extreme heat.

Article from The Earthbound Report on passive cooling design strategies for homes located in hot climates.

A structural insulated panel (SIP) roof has no embedded lumber in the structure, and therefore nothing substantial for attaching PV array and solar hot water mounts. Single or double lumber splines could be put into the panels, or I-joists at 4-foot intervals could be added.

Factsheet describing tips for building or renovating with a focus on disaster resistance.

Factsheet outlining how window attachments like cellular shades, roller shades, storm windows with low-emissivity coatings, and solar screens are low-cost steps that can be implemented to keep homes cool in the summer.

Website providing comparison charts and reviews of hybrid inverters for solar power systems.

Article describing how air speed affects thermal comfort and how fans can provide energy savings.

Study using simulations to understand the impact that shading and natural ventilation would have had on the survivability of non-air-conditioned buildings during the 2021 heat wave in the Pacific Northwest.

Report detailing natural ventilation and passive airflow systems.

This document covers how broken windows can allow wind and rain inside the house and even lead to roof failure.

Article describing what evaporative coolers are, how they work, different types, performance, where they are appropriate, and how to install and maintain them.

Report that describes BSC's Houses That Work II (HTWII) climate-specific technical resource, beginning with an overall HTWII introduction and four sections explaining the four most important hygro-thermal climate regions: Hot-Humid, Mixed-Humid, Cold, and Hot-Dry/Mixed-Dry.

Webpage describing benefits of adding battery storage to homes and an estimation tool.

Web page describing how to identify heat-related illness and how to prevent it.

Article from University of Arizona on keeping homes cool during extreme heat, both personal and system changes.

Paper describing vegetation impacts on cooling load for buildings.

Book detailing passive cooling methods including airflow methods, evaporative cooling, and earth cooling.

News article describing the state of the residential battery storage market.

Webpage from Boston Solar describing how solar plus storage options can be beneficial for maintaining electricity during power outages.

Study investigating measured cooling energy savings in homes across the U.S. from the installation of roofing with higher solar reflectance.

Study investigating measured cooling energy savings from the installation of wall finishes with higher solar reflectance.

Paper describing energy savings in space cooling from shading condenser units.

Technical article presenting the results of an analysis on the effect of insect screens on window solar heat gain coefficients and U-values.

This paper discusses model validation using data from three thermosiphon systems.

This report requires all elements of rooftop PV panel systems to be designed for component and cladding pressures per ASCE 7-10.

Standard covering overs mounting systems, including mounting devices, clamping devices and ground lugs for use with photovoltaic modules and panels and contains requirements for ground-mounted and roof systems as part of a nonstructural building component.

This Photovoltaic (PV) Installer Resource Guide is an informational resource covering basic requirements for PV installations intended for individuals pursuing the Photovoltaic Installer Certification credential offered by the North American Board of Certified Energy Practitioners (NABCEP).

DOE Energy Saver webpage providing a brief summary of natural ventilation for houses.

Webpage presenting updated maps for annual average temperature and precipitation in the contiguous U.S.

Document describing recommended modeling rules, potential compliance credits, and eligibility criteria for residential night ventilation cooling systems for California’s Title 24 energy efficiency standards.

Newsletter providing news and information to members of the New Jersey National Guard.

A document providing guidance on integrating a PV array with a roof system.

Website providing comparison charts and reviews of off-grid inverters for solar power systems.

Article from Smarter Homes NZ on home building techniques that incorporate passive cooling.

Book describing passive cooling techniques from a technical and academic perspective.

This study evaluated 11 measures for passive cooling using four heat resilience metrics with and without grid power in Fresno CA and found the two most effective measures were installing solar-control window films and adding roof insulation; natural ventilation also helped reduce overheating in...

Website providing guidance on passive heating, cooling, and lighting methods.

Article from Williams College on the key elements of passive solar design for homes.

Paper describing a study on savings in peak power and cooling energy for homes with shade trees.

Paper summarizing passive and low-energy cooling systems for buildings.

Brochure describing what permeable pavement is, where to install it, and how to maintain it.

Report providing information on performance of mortars and concrete containing PCMs.