Library

Webpage describing federal regulation related to excess flow valves on residential natural gas lines.

Best Practices document providing an introduction to current photovoltaic and solar thermal building practices.

Web article about solar site assessment.

Report presenting seismic design and construction guidance for one- and two-family houses for homebuilders, knowledgeable homeowners, and other non-engineers.

Guidebook that provides information on earthquake hazards that can damage homes, the design and retrofit of earthquake resistant housing, and how to find more information on earthquake safety.

Report presenting construction methods, building products, appliances and equipment of four single-family houses that achieve dramatic energy reductions and approach “net zero energy” use.

Webpage describing how to locate and manually shut off natural gas service at the meter.

A structural insulated panel (SIP) roof has no embedded lumber in the structure, and therefore nothing substantial for attaching PV array and solar hot water mounts. Single or double lumber splines could be put into the panels, or I-joists at 4-foot intervals could be added.

Report describing ways to retrofit a home to make it more resistant to earthquakes.

Factsheet describing tips for building or renovating with a focus on disaster resistance.

Website providing comparison charts and reviews of hybrid inverters for solar power systems.

ICC-ES Evaluation Report reviewing proprietary steel shear wall panels developed by Simpson Strong-Tie Company to resist vertical and lateral loads in walls resulting from wind or earthquakes.

Article describing excess flow valves installed on gas lines to shut-off natural gas flow to a home in the event that a gas line is severed due to an earthquake, natural disaster, earthquake, etc.

Webpage detailing how to purchase and install the correct shut-off valve for homes in California, including differences between earthquake and excess flow valves and how to install each.

Report showing installers how to attach ducts, pipes, and associated equipment to buildings to minimize earthquake damage.

Report that describes BSC's Houses That Work II (HTWII) climate-specific technical resource, beginning with an overall HTWII introduction and four sections explaining the four most important hygro-thermal climate regions: Hot-Humid, Mixed-Humid, Cold, and Hot-Dry/Mixed-Dry.

Website providing a probabilistic map of the expected number of damaging earthquakes around the U.S.

Webpage describing benefits of adding battery storage to homes and an estimation tool.

Document from IBHS explaining how to inspect homes for earthquake preparedness and retrofit solutions for homes that have suffered structural damage as a result of earthquakes.

Article describing dozens of ideas on how to retrofit a home so it is more earthquake ready.

Webpage from Boston Solar describing how solar plus storage options can be beneficial for maintaining electricity during power outages.

Study investigating measured cooling energy savings in homes across the U.S. from the installation of roofing with higher solar reflectance.

Study investigating measured cooling energy savings from the installation of wall finishes with higher solar reflectance.

Standard using performance-based principles to determine dead, live, soil, flood, tsunami, snow, rain, atmospheric ice, earthquake, wind, and fire loads, and their combinations for general structural design. This version of the standard was published in the year 2016 and is available in both digital...

Standard using performance-based principles to determine dead, live, soil, flood, tsunami, snow, rain, atmospheric ice, seismic, and wind loads, and their combinations for general structural design. The current version of this standard was published in the year 2022 and is available in both digital...

Standard using performance-based principles to determine dead, live, soil, flood, snow, rain, atmospheric ice, earthquake, and wind loads, and their combinations for general structural design. This version of the standard was published in the year 2010 and is available in both digital and print...

Report providing a resource that communities can use to identify and evaluate a range of potential mitigation actions for reducing risk to natural hazards and disasters.

This paper discusses model validation using data from three thermosiphon systems.

This report requires all elements of rooftop PV panel systems to be designed for component and cladding pressures per ASCE 7-10.

Standard covering overs mounting systems, including mounting devices, clamping devices and ground lugs for use with photovoltaic modules and panels and contains requirements for ground-mounted and roof systems as part of a nonstructural building component.

This Photovoltaic (PV) Installer Resource Guide is an informational resource covering basic requirements for PV installations intended for individuals pursuing the Photovoltaic Installer Certification credential offered by the North American Board of Certified Energy Practitioners (NABCEP).

Website providing information on tsunamis, earthquakes, tornadoes, hurricanes, thunderstorms and more.

Report updating and expanding on a 2005 study that found, among other things, that every $1 of natural hazard mitigation funded by FEMA between 1993 and 2003 saved the American people an average of $4 in avoided future losses.

Website containing USGS-related publications related to natural hazards.

Report describing the interactions, both positive and negative, between common green building practices and the robustness of residential buildings to withstand natural hazards.

Guide for electrical systems design including installation guidance and best practices for flood-prone areas.

Guide for fuel systems design including installation guidance and formulas for calculating loads and buoyancy forces for specifying number, type and capacity of strapping for hold-downs in flood-prone areas.

Standard establishing criteria for levels of health care services or systems based on risk to the patients, staff, or visitors in health care facilities to minimize the hazards of fire, explosion, and electricity.

A document providing guidance on integrating a PV array with a roof system.

A website containing a video series by NW Seismic illustrating how a seismic retrofit should be done and ways they are done incorrectly.

Website providing comparison charts and reviews of off-grid inverters for solar power systems.

A fact sheet educating the public on the potential hazards and safe use of portable generators.

Large scale simulation study investigating the effects of cool roofs and walls on buildings of various vintages across the U.S., with special attention given to California.

Database describing FEMA preparedness webinars including natural hazard preparedness.

Fact sheet describing how to prepare for a natural disaster and assemble a disaster supply kit.

Report containing data on injuries and fatalities associated with television, furniture, and appliance product instability, or tip-over incidents.

Brochure describing multiple earthquake safety measures for homeowners to take, including home reinforcement, evacuation tips, and electrical and appliance tips.

Report aiming to "de-mystify" technology and economic considerations of residential PV systems.

Website estimating energy production and cost of energy of grid-connected photovoltaic (PV) energy systems throughout the world.