Library

2009 edition of code establishing minimum regulations for plumbing facilities, including fixtures, water heaters, water supply and distribution, sanitary drainage, storm drainage, etc.

Fact sheet providing an overview of the FEMA document Wind Retrofit Guide for Residential Buildings.

2012 edition of code establishing minimum regulations for plumbing facilities, including fixtures, water heaters, water supply and distribution, sanitary drainage, storm drainage, etc.

2015 edition of code establishing minimum regulations for plumbing facilities, including fixtures, water heaters, water supply and distribution, sanitary drainage, storm drainage, etc.

Code set from IAPMO explaining plumbing standards. 2015 publication.

2018 edition of code establishing minimum regulations for plumbing facilities, including fixtures, water heaters, water supply and distribution, sanitary drainage, storm drainage, etc.

Code set from IAPMO explaining plumbing standards. 2018 publication.

Article describing thermal bridging, construction practices that encourage thermal bridging, and solutions.

Acceptance criteria providing guidelines for demonstrating compliance with codes referenced in the criteria related to barriers to water migration in thin-set installations of ceramic tile and stone flooring and shower sub-pan linings.

Case study about high humidity, mold and condensation on surfaces in S. Florida, and how building characteristics cause and amplify these problems.

Manual describing best practices or home construction in Alaska and northern climates.

Alliance for Water Efficiency website homepage.

Article describing different kinds of water-resistant backer boards.

Fact sheet describing basement insulation considerations.

Information sheet describing techniques for insulating basements.

Article explaining the importance of regular inspections of boiler systems in maintaining their safety, lifespan, and efficiency.

Report providing water management details for roof assemblies.

The Builder's Guide provides the building industry with the latest and best practical information on how to apply building science principles to structures as systems in hot-humid climate regions.

Document outlining building science principles about air flow, heat flow and moisture flow in homes.

Report about the fundamental concepts that must be understood at the planning or initial nspection of existing homes regarding surface and ground water management.

Article describing correct ways to eliminate water damage by incorporating a sacrificial layer to foundation walls and footings.

Article describing the principle of capillarity in construction materials.

Volume 1 of a two-volume report providing a comprehensive approach to planning, siting, and risk management for homes constructed in coastal environments.

Volume II of a two-volume report providing a comprehensive approach to design, construction, and renovation of homes located in coastal environments.

Information guide describing issues with concrete floors, in multiple climate zones.

Document discussing moisture considerations and testing techniques for concrete floors.

Document about condensation between the panes, on the inside surface of the outer glass of double pane windows.

This case study describes costs associated with the External Thermal and Moisture Management System developed by the NorthernSTAR Building America Partnership for retrofitting roofs with rigid foam over the roof deck, especially on one and a half-story homes.

Standard describing prediction, mitigation, and reduction of moisture damage to the building envelope, materials, components, systems, and furnishings, depending on climate, construction type, and HVAC system operation; the webstore allows preview or full purchase.

Article describing the causes of wood decay and moisture issues.

Conference paper describing the use of engineered rainscreen products to provide air flow and water drainage space in wall assemblies in residential and commercial buildings.

A guide on the use of rain barrels for greater water efficiency and use in gardens and lawns.

Article describing the difference between swales and hugels (berms used to create soil from woody debris).

Report covering the rainwater performance of building assemblies.

Brochure describing drainage planes, also referred to as water resistive barriers.

Fact sheet describing drip irrigation for landscaping.

Technical report describing design and construction methodologies for durable balconies and decks, focusing on proper sloping, flashing, drainage, and ventilation to mitigate moisture-related issues.

A map describing the average temperature of shallow groundwater in Fahrenheit across the continental United States.

Calculator to help homeowner's calculate the size of pool pump they need.

Handbook to help property owners understand the rules, procedures, standards, and criteria that apply to the environmental resource permit (ERP) program under Part IV of Chapter 373 of the Florida Statutes.

Broschure detailing water control strategies for building openings (e.g., vents and drainpipes).

Report using relative humidity and temperature data from NOAA to measure average equilibrium moisture content for each month of the year in 262 locations in the United States and 122 locations outside the United States.

Report describing construction site erosion and sediment control practices recommended and required by a county planning department.

Guidance documents describing Erosion Control Blankets (ECBs) use as a construction material that provides temporary cover and support for establishing vegetation on bare soil. ECB holds topsoil and seed (typically grass) in place to minimize erosion during germination of seed.

Factsheet describing steps builders should take to reduce erosion and control sediment on construction sites during home construction.

Webpage from LSU AgCenter answering frequently asked questions after gutting a flooded home, including mitigation strategies for future floods.

Handbook describing the permitting process regulating the transfer of stormwater from private property owners to the State of Florida Department of Transportation stormwater drainage systems.

An engineering design guide for hydronic heat loops, discussing the features and advantages of condensing boilers.

A recovery advisory guide presenting important recommendations to reduce wind and water infiltration damage to new and existing residential buildings.

Document explores alternatives to riprap on banks and waterways to mitigate bankside erosion in the Pacific Northwest.