Library

Guide providing minimum design and construction requirements for storm shelters that provide a safe refuge from storms that produce high winds, hurricanes, and tornadoes.

Report summarizing the wind-resistant provisions of the 2015 edition of the International Building Code.

Standard outlining industry procedure for sizing residential duct systems.

Standard covering equipment sizing loads for single-family-detached homes, small multi-unit structures, condo­miniums, town houses and manufactured homes.

Standard covering sizing strategies for all types of cooling and heating equipment, as well as how to use comprehensive manufacturer’s performance data on sensible, latent, or heating capacity for various operating conditions.

Document providing guideance and considerations for duct design in an energy efficient house.

Report describing the experience gained from AIA’s Disaster Assistance Program with first-hand accounts of disaster response and recovery, case studies and other best practices, including approaches to designing buildings to be more adaptable to uncertainty.

A report that evaluates the force it takes to crack stucco of various thicknesses.

Technical report detailing a study in which actual cooling loads are compared to modeled cooling loads.

FEMA risk management series guide on hospital safety and resilience to natural disasters.

Report providing information on ways to incentivize funding of hazard mitigation programs.

Report identifying two barriers that limit the ability of builders to explore opportunities for higher levels of energy efficiency in housing: the use of duct system materials that inherently achieve airtightness and are right-sized for low-load houses, and, the ability to air seal fire separation...

Article describing a case study in which a whole-house battery and PV system was tested in a home with cooling and refrigeration during a hurricane in Florida.

A fact sheet on how to prepare for a natural disaster by storing food and water through an emergency food supply.

Website article touring areas hit hardest by tornadoes to see how they are building differently to protect against the next big twister.

Guide by the Northeast Energy Efficiency Partnerships on how to size heat pumps in a cold climate.

Presentation about proper installation of flexible ducts.

NOAA webpage providing images and short descriptions of different types of hurricane shutters.

An impact test report from projectile missile tests against brick veneer, verifying that brick veneers perform well to resisting hurricane force wind driven debris.

Article describing what evaporative coolers are, how they work, different types, performance, where they are appropriate, and how to install and maintain them.

Report providing step-by-step instructions for heating contractors and hydronic designers for selecting the proper control settings to maximize system performance and improve response time when using a thermostat setback.

Report providing a resource that communities can use to identify and evaluate a range of potential mitigation actions for reducing risk to natural hazards and disasters.

Website containing USGS-related publications related to natural hazards.

A fact sheet educating the public on the potential hazards and safe use of portable generators.

Website providing guidance on how to reduce the risk of damage to a home from hail.

Database describing FEMA preparedness webinars including natural hazard preparedness.

Fact sheet describing how to prepare for a natural disaster and assemble a disaster supply kit.

A fact sheet providing tips on how to assemble a kit of food, water and other disaster supplies in the event of an emergency.

Report describing the testing of various siding materials for their ability to resist bullets from small firearms.

Fact sheet describing how to install bracing to retrofit roof dormers for increased wind resistance.

FEMA information on safe room funding to regional governments.

Report covering the planning, design, construction, and operation of residential and community safe rooms. Written for architects, engineers, building officials, local officials and emergency managers, and prospective safe room owners and operators.

Information sheet describing how to select a properly sized water heater based on household usage patterns, peak demand, and heater type—whether tankless, solar, or storage-based—to ensure efficiency and adequate hot water supply.

A website providing information on how to properly size a water heater based on tank size, volume, peak hour demand and other factors.

Web page describing the basics of how to size and build a battery bank for electricity storage.

Article describing suggested food supplies, sanitation, safety, and cooking for during and after an emergency.

Report presenting safe room designs and showing the homeowner and builder/contractor or local design professional how to construct a safe room for a home or small business.

Projectile missile testing of various wall panel configuration to understand how the different wall constructions would perform when struck with wind driven debris from a hurricane.

Website providing guidance for people to find and use tools, information, and subject matter expertise to build climate resilience.

Users guide to help contractors and homeowners use the Cold Climate Heat Pump Sizing Support Tools developed by NEEP to size and select the best air source heat pumps for their cold climate location.

Article describing how adhesives can be used to make homes in high-wind locations stronger and how adhesives could be too effective resulting in overloading foundation anchors under earthquake loads.

A review on the knowledge about ventilated wall claddings from field performance and hydrothermal modeling.

A heat map showing the average number of tornadoes per year across the United States

Article discussing structural and nonstructural building components and illustrates a variety of wind-induced damages, including wind-driven rain infiltration.