Library

Manual describing scientific, technical, and practical information needed to work with communities on urban forestry, including a section on trees and construction.

Article describing how adhesives can be used to make homes in high-wind locations stronger and how adhesives could be too effective resulting in overloading foundation anchors under earthquake loads.

A review on the knowledge about ventilated wall claddings from field performance and hydrothermal modeling.

Website describing proper methods for installing vinyl siding on homes.

Document describing wall bracing techniques and suggestions for the city of Verona, WI building department.

A guide describing how to do wall bracing calculations and evaluations.

Document outlining a well-detailed drainage plane and flashings.

Web page providing statistics on weather related fatalities and injuries.

Manual showing how to properly use grass swales to manage excess water runoff.

Report providing design guidance for wood-framed residential construction in high wind areas where design wind velocity requirements do not exceed 140 miles per hour.

Webpage describing the Wildland Urban Interface (WUI) and how to plan residential building to mitigate wildfire risks associated with building in the WUI.

Webpage from USFA compiling resources from across the U.S. on Wildland Urban Interface (WUI) information.

A report for homeowners and contractors providing specific recommendations for how to retrofit existing components of a home to withstand wildfire.

Website describing how wildfires spread and how fuels, weather, and topography influence fires.

Article describing ways to design and construct a building to resist wildfires.

A list of exterior building products and materials approved for use in wildland urban interface zoned homes. These products are non-combustible or ignition-resistant.

An example of wildland urban interface construction requirements for new buildings built in very high fire risk zones/areas.

Article describing the growth of the wildland urban interface in the United States from 1990 to 2010, expanding from 30.8 to 43.4 million homes (a 41% increase), and growing from 581,000 to 770,000 kM2 (33% growth), an increase of 189,000 km2, an area that is larger than Washington State.

Paper describing wind influences on air infiltration related energy losses for residential housing and the shielding effects of fences, adjacent structures, and vegetation.

Study showcasing the location of the highest uplift force on the hip, ridge, and perimeter regions of roofs, and thus roofing material needs for the most fasteners and adhesive at these locations.

Study analyzing wind pressures on hip roofs where two hip roofs come together forming an L or T shaped roof or building.

Guide presents mitigation measures in a Mitigation Package which combined set of retrofit measures that must be implemented for a house to provide a defined level of protection; identifies three successive Mitigation Packages: Basic, Intermediate, and Advanced. Implementing the Mitigation Packages...

Article discussing structural and nonstructural building components and illustrates a variety of wind-induced damages, including wind-driven rain infiltration.

Fact sheet describing impact-resistant window systems with specifics on Florida’s building codes.

Website providing consumers with general guidance on preparing for and surviving a winter storm.

Website providing information to prepare for winter storms, prevent cold temperature-related health problems, and protect yourself during all stages of a winter storm.

Catalog detailing the metal connector products manufactured by Simpson Strong-Tie and their applications and strengths.

Manual providing engineered and prescriptive design requirements for wood frame construction used in one and two-family dwellings.

A hurricane retrofit guide describing techniques for strengthening roof-to-wall connections for family homes.