Library

2009 edition of code for commercial buildings that brings together all structural, plumbing, mechanical, fuel gas, energy and electrical provisions for all buildings except detached one- and two-family residences and townhouses up to three stories.

2009 edition of code establishing a baseline for existing building retrofits to reach appropriate safety levels under new construction requirements covered in other ICC codes.

Fact sheet providing an overview of the FEMA document Wind Retrofit Guide for Residential Buildings.

A guide about the above code residential home certification called Earth Advantage and required and optional measures available to meet the point requirements for certification.

2009 edition of code for commercial buildings that brings together all structural, plumbing, mechanical, fuel gas, energy and electrical provisions for all buildings except detached one- and two-family residences and townhouses up to three stories.

2012 edition of code establishing a baseline for existing building retrofits to reach appropriate safety levels under new construction requirements covered in other ICC codes.

Code describing energy codes for energy-conserving and compliant designs in Florida.

Report summarizing the requirements to strenghthen new homes against property damage caused by high wind occurrences per the IBHS Fortified Homes High Wind Standard for New Homes.

Fact sheet summarizing the changes to the flood provisions in the 2012 I-Codes that appear in the 2015 edition.

2015 edition of code establishing a baseline for energy efficiency by setting performance standards for the building envelope (defined as the boundary that separates heated/cooled air from unconditioned, outside air), mechanical systems, lighting systems and service water heating systems in homes...

2015 edition of code establishing a baseline for existing building retrofits to reach appropriate safety levels under new construction requirements covered in other ICC codes.

Florida building code including all the amendments and additions by Florida for the wind-borne debris regions and the high-velocity hurricane zone.

2018 edition of code establishing a baseline for energy efficiency by setting performance standards for the building envelope (defined as the boundary that separates heated/cooled air from unconditioned, outside air), mechanical systems, lighting systems and service water heating systems in homes...

2018 edition of code establishing a baseline for existing building retrofits to reach appropriate safety levels under new construction requirements covered in other ICC codes.

2019 version of the California Residential Code.

Report summarizing the requirements for strenghtening and protecting the roof, openings in the house, and creating a continuous load path to strengthen walls and foundation per the IBHS Fortified Homes Hurricane Standard for New Homes.

Guide describing the requirements by FORTIFIED Home™ for improving the home's resistance in severe thunderstorms, straight-line wind events, and high winds at the outer edges of tornadoes.

Guide describing the requirements by FORTIFIED Home™ for improving the home's resistance in severe thunderstorms, straight-line wind events, and high winds at the outer edges of tornadoes.

Catalog describing FEMA preparedness seminars from 2021 including preparedness and natural hazards topics.

State building code containing general building design and construction requirements relating to fire and life safety, structural safety, energy efficiency, and access compliance; based on the 2021 International Building Code.

Article from the Sierra Club explaining 5 steps to take to ensure your home's resistance to wildfires, including site maintenance and roof construction guidelines.

Document describing advancement in factory built housing innovations.

Article describing methods for venting a vented attic and a roof assembly over an unvented attic.

Report describing testing and analysis on deep energy retrofits of existing single-family homes in the U.S.

Guide developed to help contractors, building operators, and city officials successfully adopt cool roof and pavement technology.

Energy Star web page providing guidance on attic ventilation.

Document describing three methods for elevating a home out of the flood zone.

Fact sheet describing best strategies to bring ductwork on single-story homes with a slab-on-grade foundation in hot, dry climates into the conditioned envelope of the home intending to highlight the pros and cons of multiple ductwork integration strategies, including traditional duct systems in...

Fact sheet describing air-sealing concerns and remedies, including HRV/ERV installation, caulking, spray foam, and weatherstrip installation.

Manual describing best practices or home construction in Alaska and northern climates.

A publication highlighting recommendations that contribute to improved overall performance in the structural shell and focus on good connection details to tie together exterior walls, roofs and floors.

Webpage providing mapping tool for obtaining ground snow load, based on ASCE 7-10, for any location in the contiguous United States, with the exception of locations requiring a case study due to extreme local variations in ground snow loads. Fee required for some data.

Technical fact sheet describing ways to construct asphalt shingle roofs to be more resistant to high winds and hurricanes; also published in FEMA P-499 “Home Builder’s Guide to Coastal Construction: Technical Fact Sheet Series.”

Technical article describing issues and moisture concerns related to weatherization efforts.

SPFA website signup page to access SPFA documents.

Article from California Earthquake Authority on the benefits of retrofitting homes to withstand earthquake forces, with a focus on foundations, walls, and chimneys.

Report providing water management details for roof assemblies.

Book presenting the best techniques for energy and resource efficient residential construction in the colder climates of North America.

Presentation describing details for installing structural insulated panels (SIPs).

Report comparing a variety of roof insulating strategies to present their advantages and disadvantages according to several comparison criteria.

Article describing the control layers (air, thermal, and vapor barriers) needed to build homes successfully in very cold locations.

A comprehensive list of professional certifications offered by the Building Performance Institute. The webpage includes links to overviews of the different certificates, certification scheme handbooks, and directions for taking certification exams and recertification.

Document containing recommendations on how to brace roofs and gable end walls based on lessons learned from analyzing the destruction from hurricane Andrew.

Document outlining building science principles about air flow, heat flow and moisture flow in homes.

An article discussing how different metal roof materials and attachment methods affect the ability of the roof to thermally expand and contract and the durability of different solutions.

Catalog describing FEMA earthquake-resistant construction resources.

News article from SFGate explaining and giving figures on how chimney failure is the most common type of damage to homes during an earthquake.

Volume 1 of a two-volume report providing a comprehensive approach to planning, siting, and risk management for homes constructed in coastal environments.

Volume II of a two-volume report providing a comprehensive approach to design, construction, and renovation of homes located in coastal environments.

Study investigating measured cooling energy performance in side-by-side identical homes with varying roof types, including cool roof technologies.