Showing 201 - 250 of 367 results:
Publication Date
·
Author(s)
International Association of Certified Home Inspectors
·
Organization(s)
InterNACHI
Description
Article describing the flashing of roofs and what to look for, targeted at home inspectors.
Publication Date
·
Author(s)
Ply Gem Siding Group
·
Organization(s)
Ply Gem Siding Group
Description
Siding installation guide for Ply Gem Siding Group products.
Publication Date
·
Author(s)
Lstiburek Joseph W
·
Organization(s)
Building Science Corporation,
BSC
Description
Article describing methods for insulating and air sealing vented and unvented roofs in various climates zones.
Publication Date
·
Author(s)
Aldrich Robb,
Mantha Pallavi,
Puttagunta Srikanth
·
Organization(s)
Consortium for Advanced Residential Buildings,
CARB,
National Renewable Energy Laboratory,
NREL,
Steven Winter Associates,
SWA
Description
Document describing good practices for insulating basements in new and existing homes.
Publication Date
·
Author(s)
Loomis Honorata,
Pettit Betsy
·
Organization(s)
Building Science Corporation,
BSC
Description
This Measure Guideline provides design and construction information for a deep energy enclosure retrofit solution of a flat roof assembly.
Publication Date
·
Author(s)
Grin Aaron,
Lstiburek Joseph W
·
Organization(s)
Building Science Corporation,
BSC
Description
Measure Guideline research report providing simple, long term, and durable solutions when using tapes and flashing membranes in conjunction with the exterior face of rigid polymeric foam sheathing to create the drainage plane of a wall system.
Publication Date
·
Author(s)
Building Science Corporation
·
Organization(s)
BSC
Description
Case study about how to properly tape insulating sheathing drainage planes.
Publication Date
·
Author(s)
Lstiburek Joseph W,
Ueno Kohta
·
Organization(s)
Building Science Corporation,
BSC
Description
Document providing information on basement insulation, air sealing and water management retrofits.
Publication Date
·
Author(s)
Schumacher Christopher,
Ueno Kohta,
Straube John
·
Organization(s)
Building Science Corporation,
BSC,
National Renewable Energy Laboratory,
NREL
Description
Report summarizing the importance of properly insulating and air sealing masonry walls, providing step by step instructions and approaches.
Publication Date
·
Author(s)
Dickson Bruce
·
Organization(s)
Integrated Building and Construction Solutions,
IBACOS,
U.S. Department of Energy,
DOE
Description
Report covering the fundamental waterproofing strategies for tub and shower assemblies.
Publication Date
·
Author(s)
Huang Yu Joe,
et al.
·
Organization(s)
Florida Solar Energy Center,
FSEC,
Lawrence Berkeley National Laboratory,
LBNL
Description
Study investigating measured cooling energy savings in homes across the U.S. from the installation of roofing with higher solar reflectance.
Publication Date
·
Author(s)
Hershey Don
·
Organization(s)
4Ward Consulting Group
Description
A presentation describing the standards regarding who is responsible for what part of the design to ensure the roof truss is properly designed and braced.
Publication Date
·
Author(s)
Metal Construction Association
·
Organization(s)
MCA
Description
An installation training manual discussing the installation of metal roofing materials and related accessories, for both new construction and retrofit projects.
Publication Date
·
Author(s)
Federal Emergency Management Agency
·
Organization(s)
FEMA
Description
A Recovery Advisory guide reccomending practices for designing and installing metal roof systems that will enhance wind resistance in high-wind regions (i.e., greater than 90-miles per hour [mph] gust design wind speed).
Publication Date
·
Author(s)
Miami-Dade County
·
Organization(s)
Miami-Dade County
Description
Report covering the selection of roof vents for rainwater resistance.
Publication Date
·
Author(s)
ICC Evaluation Service
·
Organization(s)
ICC Evaluation Service
Description
This report requires all elements of rooftop PV panel systems to be designed for component and cladding pressures per ASCE 7-10.
Publication Date
·
Author(s)
Grin Aaron,
Lstiburek Joseph W
·
Organization(s)
Building Science Corporation,
BSC,
National Renewable Energy Laboratory,
NREL,
U.S. Department of Energy,
DOE
Description
Report describing the work conducted for high performance hybrid assemblies.
Publication Date
·
Author(s)
Lstiburek Joseph W
·
Organization(s)
Building Science Corporation,
BSC,
U.S. Department of Energy,
DOE
Description
Report providing extensive guidance on controlling moisture in building envelopes through proper selection and installation on air, water, thermal, and vapor barriers.
Publication Date
·
Author(s)
Lstiburek Joseph W,
LePage Robert
·
Organization(s)
Building Science Corporation,
BSC
Description
Report about exterior sheathing insulation and inward driven moisture issues.
Publication Date
·
Author(s)
LePage Robert,
Schumacher Christopher,
Lukachko Alex
·
Organization(s)
Building Science Corporation,
BSC
Description
Report explaining moisture-related concerns for high R-value wall assemblies and discusses past Building America research work that informs this study.
Publication Date
·
Author(s)
Smith John,
Smegal Jonathan,
Straube John
·
Organization(s)
University of Waterloo,
Building Science Corporation,
BSC
Description
Document describing a hygrothermal modeling study, including all of the US climate zones, a range of interior humidity levels and numerous arrangements and types of insulation.
Publication Date
·
Author(s)
U.S. Gypsum Company
·
Organization(s)
U.S. Gypsum Company
Description
Brochure discussing specific practices for mitigating moisture and mold during the construction process.
Publication Date
·
Author(s)
Robbins Coreen,
Morrell Jeff
·
Organization(s)
Western Wood Products Association,
WWPA
Description
Document describing common questions about moisture, mold, and wood.
Publication Date
·
Author(s)
Puttagunta Srikanth
·
Organization(s)
Consortium for Advanced Residential Buildings,
CARB,
Steven Winter Associates,
SWA
Description
Information sheet about mold mitigation.
Publication Date
·
Author(s)
Underwriters Laboratories LLC
·
Organization(s)
UL
Description
Standard covering overs mounting systems, including mounting devices, clamping devices and ground lugs for use with photovoltaic modules and panels and contains requirements for ground-mounted and roof systems as part of a nonstructural building component.
Publication Date
·
Author(s)
Davis John Michael
·
Organization(s)
Fine Homebuilding Magazine
Description
An article about double-hung windows.
Publication Date
·
Author(s)
National Fire Protection Association
·
Organization(s)
NFPA
Description
An NFPA Standard that identifies a method for determining the minimum water supply necessary for structural fire-fighting purposes in areas where it has been determined that there is no water or inadequate water for fire fighting.
Publication Date
·
Author(s)
National Fire Protection Association
·
Organization(s)
NFPA
Description
An NFPA standards document that provides minimum requirements for the design, construction, installation, and maintenance of tanks and accessory equipment that supply water for private fire protection.
Publication Date
·
Author(s)
Lstiburek Joseph W
·
Organization(s)
Building Science Corporation,
BSC
Description
Guide providing information on controlling attic ductwork sweating.
Publication Date
·
Author(s)
National Roofing Contractors Association
·
Organization(s)
NRCA
Description
A document providing guidance on integrating a PV array with a roof system.
Publication Date
·
Author(s)
Tecle Amanuel S,
Bitsuamlak Girma T,
Chowdhury Arindam Gan
·
Organization(s)
Journal of Architectural Engineering,
American Society of Civil Engineers,
ASCE
Description
Study examining how design features, such as building envelope openings and compartmentalization, affect the wind pressure in typical low-rise buildings with gable and hip roofs.
Publication Date
·
Author(s)
Lstiburek Joseph W
·
Organization(s)
Building Science Corporation,
BSC
Description
Report covering wind loading on roofing assemblies.
Publication Date
·
Author(s)
swimmingpool.com
·
Organization(s)
Swimmingpool.com
Description
Calculator to help in calculating pool volume.
Publication Date
·
Author(s)
Rosado Pablo,
Levinson Ronnen
·
Organization(s)
Lawrence Berkeley National Laboratory,
LBNL
Description
Large scale simulation study investigating the effects of cool roofs and walls on buildings of various vintages across the U.S., with special attention given to California.
Publication Date
·
Author(s)
America Society of Home Inspectors
·
Organization(s)
ASHI
Description
Article describing how to properly manage condensing HVAC equipment.
Publication Date
·
Author(s)
Insurance Institute for Business and Home Safety
·
Organization(s)
IBHS
Description
Website providing guidance on how to reduce the risk of damage to a home from hail.
Publication Date
·
Author(s)
Insurance Institute for Business and Home Safety
·
Organization(s)
IBHS
Description
Webpage providing guidance for homeowners on how much snow weight a typical roof can handle and when to consider removing snow from the roof.
Publication Date
·
Author(s)
Fisette Paul
·
Organization(s)
UMass Amherst Department of Environmental Conservation
Description
Article describing how ice dams form on residential roofs, how they damage homes, and solutions to prevent future dams.
Publication Date
·
Author(s)
Wisconsin Focus on Energy
·
Organization(s)
Wisconsin Focus on Energy,
ENERGY STAR
Description
Fact sheet from Wisconsin Focus on Energy explaining how to prevent future ice dams on homes by learning about their formation and mitigation of contributing factors.
Publication Date
·
Author(s)
Federal Emergency Management Agency
·
Organization(s)
FEMA
Publication Date
·
Author(s)
Ojczyk Cindy,
et al.
·
Organization(s)
NorthernSTAR,
University of Minnesota,
NSTAR
Description
Research report describing study of exterior retrofit approach for air sealing, insulating, and water management conducted by the NorthernSTAR Building America Partnership team run by University of Minnesota.
Publication Date
·
Author(s)
University of Minnesota
·
Organization(s)
NorthernSTAR,
NSTAR
Description
Case study describing the External Thermal and Moisture Management System developed by the NorthernSTAR Building America Partnership for retrofitting roofs with rigid foam over the roof deck, especially on one and a half-story homes.
Publication Date
·
Author(s)
IBHS DisasterSafety
·
Organization(s)
IBHS
Description
List of recommendations from IBHS on how to protect homes from ice dam formation.
Publication Date
·
Author(s)
Federal Emergency Management Agency
·
Organization(s)
FEMA
Description
Report addressing flood, wind and seismic hazards and recommends several multi-hazard resistant foundation designs of manufactured homes.
Publication Date
·
Author(s)
Federal Emergency Management Agency
·
Organization(s)
FEMA
Description
Fact sheet describing the special considerations that must be made when installing utility equipment, such as fuel, sewage, and water/sewage lines in a coastal home, and presenting recommendations for utility protection; also published in FEMA P-499 “Home Builder’s Guide to Coastal Construction...
Publication Date
·
Author(s)
Engineering Toolbox
·
Organization(s)
Engineering Toolbox
Description
Table calculating friction losses for PVC pipe by length.
Publication Date
·
Author(s)
Oak Ridge National Laboratory
·
Organization(s)
ORNL
Description
Website providing an online calculator for determining energy and cost savings from installing radiant barriers in attics.
Publication Date
·
Author(s)
Oak Ridge National Laboratory
·
Organization(s)
ORNL
Description
Fact sheet describing analysis of potential heating and cooling savings from radiant barriers in attics.
Publication Date
·
Author(s)
U.S. Department of Energy
·
Organization(s)
DOE
Description
U.S. Department of Energy's website describing radiant barriers in homes.
Publication Date
·
Author(s)
Melody Ingrid,
Fairey Philip W,
Beal David
·
Organization(s)
Florida Solar Energy Center,
FSEC
Description
Website with answers to some of the most commonly asked questions about attic radiant barriers.