Library

Article from Purdue University on the potential for white paint technology to lower air conditioning usage requirements.

Factsheet providing design guidance for engineers describing how to characterize snow drifts on roofs in three dimensions rather than two, as anticipated in the 2022 edition of the standards, ASCE 7 - Minimum Design Loads and Associated Criteria for Buildings and Other Structures.

Fact sheet outlining best design and construction practices for tile roofing in high wind areas; also published in FEMA P-499 “Home Builder’s Guide to Coastal Construction: Technical Fact Sheet Series.”

Report presenting information that aids qualified architects and engineers in the identification of the best available refuge areas in existing buildings for sheltering in place during a tornado.

Website providing guidance for people to find and use tools, information, and subject matter expertise to build climate resilience.

Information sheet providing definitions, applications, and techniques for applying air barriers.

Webpage from Southern California Earthquake Center (SCEC) on identifying key problem spots on unreinforced masonry chimneys and how to retrofit them to withstand seismic forces.

Report reviewing unvented roof assemblies, such as conditioned attics and unvented cathedral ceilings that are becoming common in North American construction.

Document summarizing the various papers on unvented conditioned cathedralized attics found on BSC's website.

Report covering wind uplift and roofing membrane failures.

Article describing how adhesives can be used to make homes in high-wind locations stronger and how adhesives could be too effective resulting in overloading foundation anchors under earthquake loads.

Webpage describing the use of cool roofs to reduce heat islands and and benefits and costs.

Article describing a method for flashing roof vent boots, describing how to flash the pipe, how to flash over and under the pan, and finish by shaping the shingles, as well as addressing potential water leakage by adding an additional seal with EPDM flashing tape with a butyl adhesive backing to the...

A review on the knowledge about ventilated wall claddings from field performance and hydrothermal modeling.

Report describing the formation of icicles and ice dams along poorly ventilated roofs and how to mitigate ventilation issues with insulation and vents.

Report describing the use of attic ventilation to control moisture in cathedral roofs and avoid the formation of ice dams.

Guide providing information on controlling attic ductwork sweating.

Website describing proper methods for installing vinyl siding on homes.

Report covering the migration of wind-blown embers in roof vents.

Document describing wall bracing techniques and suggestions for the city of Verona, WI building department.

A guide describing how to do wall bracing calculations and evaluations.

Web page providing statistics on weather related fatalities and injuries.

Article describing how to weatherproof dormers using peel-and-stick membranes when flashing a dormer.

Manual showing how to properly use grass swales to manage excess water runoff.

Report describing sloped roof assemblies with high levels of thermal performance.

Report providing design guidance for wood-framed residential construction in high wind areas where design wind velocity requirements do not exceed 140 miles per hour.

Web page explaining what a cool roof is and how they work, as well as benefits to their use and links to research studies.

Webpage describing how different amounts and types of snow loads affect the structural integrity of roofs and homes.

Article describing ways to design and construct a building to resist wildfires.

Study showcasing the location of the highest uplift force on the hip, ridge, and perimeter regions of roofs, and thus roofing material needs for the most fasteners and adhesive at these locations.

Study analyzing wind pressures on hip roofs where two hip roofs come together forming an L or T shaped roof or building.

Guide presents mitigation measures in a Mitigation Package which combined set of retrofit measures that must be implemented for a house to provide a defined level of protection; identifies three successive Mitigation Packages: Basic, Intermediate, and Advanced. Implementing the Mitigation Packages...

Article discussing structural and nonstructural building components and illustrates a variety of wind-induced damages, including wind-driven rain infiltration.

Fact sheet describing impact-resistant window systems with specifics on Florida’s building codes.

Website providing consumers with general guidance on preparing for and surviving a winter storm.

Website providing information to prepare for winter storms, prevent cold temperature-related health problems, and protect yourself during all stages of a winter storm.

Catalog detailing the metal connector products manufactured by Simpson Strong-Tie and their applications and strengths.

Manual providing engineered and prescriptive design requirements for wood frame construction used in one and two-family dwellings.

A hurricane retrofit guide describing techniques for strengthening roof-to-wall connections for family homes.

Report describing Net Zero house design with sloped roof assemblies.