Library

2009 edition of code establishing a baseline for energy efficiency by setting performance standards for the building envelope (defined as the boundary that separates heated/cooled air from unconditioned, outside air), mechanical systems, lighting systems and service water heating systems in homes...

2015 edition of code establishing a baseline for energy efficiency by setting performance standards for the building envelope (defined as the boundary that separates heated/cooled air from unconditioned, outside air), mechanical systems, lighting systems and service water heating systems in homes...

Report telling consumers the risks of radon, how radon gets into a home, and steps consumers can take to reduce radon exposure in their homes.

Case study providing homeowners guidance on installing window air conditioners.

Information sheet about unvented fireplaces and combustion safety.

Standards book discussing the minimum standards of total system balance of HVAC systems.

Standard covering equipment sizing loads for single-family-detached homes, small multi-unit structures, condo­miniums, town houses and manufactured homes.

Standard providing a universally accepted definition for quality installation for residential and commercial heating, ventilating, and air conditioning applications.

Document detailing the requirements, roles, and obligations for participants in an organized effort, ensuring that HVAC installations comply with the ANSI/ACCA 5 QI – 2010 (HVAC Quality Installation Specification) QI Standard.

Standard for use and reference by designers, architects, engineers, contractors, installers and users for evaluating, selecting, specifying and properly installing flexible duct in heating and air conditioning systems.

Report on the design and evaluation of extended plate and beam.

Updated detailed information about Formaldehyde.

Report that collected field data from a whole-home program in Illinois are utilized to compare marketplace-installed measures to the energy saving optimal packages previously developed for 15 housing types.

Report covering moisture and leakage issues associated with spray foam insulation application to the underside of roof sheathing.

Report describing methodology, analysis, and findings from a case study of a 110-unit retrofit of gas tankless water heaters in a hot/humid climate in Alachua County, Florida.

Report summarizing commissioning, short-term testing, utility bill data analysis, and results of on-site monitoring of a deep energy retrofit.

Information sheet providing details on the vapor permeance of different types of materials used in building assemblies.

Expert meeting focusing on identifying gaps and barriers in combustion safety that need to be addressed by future research, and to develop data-driven technical recommendations for code updates so that a common approach for combustion safety can be adopted by all members of the building energy...

Guidance document providing BA research teams and partners with specific information and approaches to identifying and overcoming potential barriers to Building America (BA) innovations arising in and/or stemming from codes, standards, and rating methods.

Report describing a deep energy retrofit project for a two-family wood framed home located in Belmont, Massachusetts.

Report describing findings from a multifamily test home focusing on the combination of energy measures that are feasible, affordable and suitable for multifamily construction in cold climates.

Report recording the results of a field study conducted in a single historic home in Seattle, Washington, to document the performance of Indow Windows' interior storm window inserts.

Research study investigating the energy performance and cost effectiveness of several state-of-the-art retrofit strategies that could be used in residential houses in the Boston and New England area.

Research study describing an experimental and theoretical investigation of the energy and hygrothermal performance of retrofit foundation insulation systems in climate zones 6 and 7.

Report describing how space-conditioning systems are operating in the field and if these systems are meeting required standards.

Report about instrumentation and limited short-term testing completed on a retrofit unoccupied test house in Fresno, California.

Report outlining the steps developers can take to create high-performance standards on a community-wide scale.

Report on heating and cooling air-distribution ducts that are insulated, installed close to the ceiling in a vented attic and covered with attic insulation to minimize energy loss.

Research report providing a comparison of the most common residential water heating technologies to determine energy-efficient and cost-effective water heating technologies are when subjected to a variety of typical operating conditions.

Research study comparing various retrofit models in Wisconsin to evaluate performance in terms of savings per home and program cost per home to assess the relative cost effectiveness of each program design.

Report telling consumers how radon gets into a home and how to reduce radon entry into a home.

Report describing the progress toward and issues related to developing a usable, standardized, empirical data-based software accuracy test suite.

Report presenting a parametric analysis using a numerical model of a new concept in desiccant and evaporative air conditioning.

Guide about designing and installing closed crawlspaces.

Research report with results from field tests in two homes in Austin, Texas, from October 2011 to June 2012 to evaluate the comfort performance of ductless mini-split heat pumps

Journal article presenting a discussion of the state-of-the- art in electricity management in smart homes, the various enabling technologies that will accelerate this concept, and topics around consumer behavior with respect to energy usage.

Report outlining the steps of translating a new home construction scope of work (SOW) to SOW for retrofit.

Research study examining efficiency retrofit opportunities, typical renovation practices, and pathways for achieving U.S. Department of Energy (DOE) goals for existing homes in Florida.

Report investigating performance and energy savings potential of heat pump water heaters.

Report using pre- and post-system upgrade data to analyze the energy savings associated with Iowa's HVAC SAVE program for space heating.

Factsheet describing the benefits of purchasing and installing ENERGY STAR rated fans and ventilation products.

Program criteria for residential exhaust fans used for ventilation.

Report describing the evaluation and selection of ventilation systems for homes retrofitted for energy aesthetic and health/safety improvements in Las Vegas.

Research study simulation adapting and applies the general framework described in Building Energy Simulation Test for Existing Homes for self-testing residential building energy model calibration methods.

Report exploring feasibility of designing prescriptive retrofit measure packages for typical Chicago region multifamily buildings in order to achieve 25% source energy savings.

Report summarizing post-retrofit results for 13 existing homes in a deep energy retrofit pilot program.

Report evaluating opportunities to improve and streamline delivery of residential retrofit measures.

Research study examining the effective moisture penetration depth (EMPD) model and its suitability for building simulations.

Report examining implementation of an exterior insulation and over-clad strategy for brick masonry buildings in Chicago.

Article describing benefits of ECM motors and how they can be installed as retrofit motors in HVAC equipment.