Library

Technical manual from ACCA outlining correct methods for zoning of residential HVAC systems.

This Standard establishes the minimum requirements to evaluate a residence with regards to energy efficiency, water conservation, occupant comfort, and indoor air quality.

This report outlines research activities that are expected to facilitate the adoption of energy retrofits by remodeling contractors and roofing contractors using retrofit panels which applicable to many existing house designs in most climates and markets.

Report covering interior energy retrofits of masonry buildings.

This Best Practices Manual is the product of Hammer & Hand’s ongoing work to document and internally codify our standard operating procedures for construction practice.

Brochure intended to provide readers with a working knowledge of residential heating and cooling duct systems.

Document illustrating some analysis concepts that are proven to be effective and reliable in analyzing the transient energy usage of advanced energy systems as well as of entire houses.

Part 2 of an article discussing how to maximize two-pipe steam systems for resident space heating.

You can save energy and maintain a comfortable swimming pool temperature by using a smaller, higher efficiency pump and by operating it less.

Report investigating the nature, strength, and durability of connections between high performance dwellings and developments.

Information sheet with safety tips for home owners on proper maintenance of clothes dryers.

Report outlining how Smart ventilation controls (SVC) balance energy consumption, comfort, and IAQ by optimizing mechanical ventilation operation to reduce the heating and/or cooling loads, improve management of indoor moisture, and maintain IAQ equivalence according to ASHRAE 62.2.

Results from a research program testing airtightness, implications of air leakage and contaminant reduction over the garage-to-house interface.

Website with articles on home ventilation and indoor air quality.

Article describing the correct installation of clothes dryer exhaust ducts.

2017 version of a standard covering requirements for single- and dual-pane windows, glazed side-hinged door systems, sliding doors, tubular daylighting devices, and unit skylights developed jointly by the American Architectural Manufacturers Association (AAMA), the Canadian Standards Association...

Standards for requirements, performance, construction, workmanship and others for structural-use panels.

Table of criteria for pool pumps to achieve ENERGY STAR certification.

Standard specification covering the properties of a cured single- or multicomponent cold-applied elastomeric joint sealant for sealing, caulking, or glazing operations on buildings, plazas, and decks for vehicular or pedestrian use, and types of construction other than highway and airfield pavements...

Website providing information on all types of pest management for multi-family housing.

Report providing information based on research and case studies, to remodelers and consumers about opportunities to increase home energy performance.

Report developed for Habitat for Humanity about lessons learned from demonstration retrofit projects undertaken by Habitat for Humanity affiliates in New York, Maryland, and Pennsylvania; with building systems consulting and technical assistance provided by Steven Winter Associates.

Paper describing testing for the first of a series of six near net-zero-energy test houses, using the results to work towards the construction of a true net-zero-energy house.

NAFA’s user guide for understanding ANSI/ASHRAE Standard 52.2-2012.