Library

Report on heating and cooling air-distribution ducts that are insulated, installed close to the ceiling in a vented attic and covered with attic insulation to minimize energy loss.

Study investigating measured cooling energy performance in side-by-side identical homes with varying roof types, including cool roof technologies.

Research report providing a comparison of the most common residential water heating technologies to determine energy-efficient and cost-effective water heating technologies are when subjected to a variety of typical operating conditions.

Research study comparing various retrofit models in Wisconsin to evaluate performance in terms of savings per home and program cost per home to assess the relative cost effectiveness of each program design.

Two hourly energy simulation software, BEopt and Energy Gauge USA, were compared to ensure accuracy and evaluate agreement on the impact of various energy efficiency improvements.

Installation manual describing proper installation practices, industry standards and the code requirements of roofing tiles.

Information guide describing issues with concrete floors, in multiple climate zones.

Information sheet discussing the properties and benefits of insulating concrete forms.

Document about condensation between the panes, on the inside surface of the outer glass of double pane windows.

Report about a hybrid condensing water heater (thermal efficiency = 0.973, energy factor = 0.95) installed in an occupied home in Sacramento, California, and monitored for one year to determine the actual in situ efficiency.

Guidance from Zero Energy Project on construction techniques for warmer climates, such as home orientation, and insulation requirements.

Part I of the Guide addresses walls constructed with 2x6 wood frame studs, wood structural panel (WSP) sheathing as exterior sheathing, gypsum board as interior sheathing, and a cladding system installed over WSP sheathing in low-rise residential buildings up to three stories in height. Walls with...

The Guide addresses walls constructed with 2x4 wood frame studs, wood structural panel sheathing (WSP) as wall bracing and added backing for foam sheathing, a layer of rigid foam sheathing insulation up to 1.5 inches thick over the WSP, and a cladding system installed over the foam sheathing in low...

Article describing construction best practices to help reduce the wind-induced pressure loads on a low-rise building during a hurricane.

Brochure helping homeowners identify hazards, work with contractors to remove the hazards, help ensure the work is done properly, and educate when they can return safely to the home.

Report telling consumers how radon gets into a home and how to reduce radon entry into a home.

Article describing research encouraging use of exterior insulation to warm interior sheathing surfaces in walls and roof assemblies to reduce the likelihood of condensation during cold weather

Standard covering requirements for the assembly, installation, maintenance, and operation of controls and safety devices on automatically operated boilers directly fired with gas, oil, gas-oil, or electricity, having fuel input ratings under 12,500,000 Btu/hr.

Study describing efforts and outcomes in developing color-pigmented roofing products with coatings to increase solar reflectance.

Article describing the difference between conditioned or unvented attics and unconditioned or vented attics.

Paper describing the effects of tree canopies on residential climates indicating tree cover to be beneficial to climate conditions

ENERGY STAR webpage discussing the costs and benefits of cool roofs.

Webpage from U.S. Department of Energy describing 'cool roofs' and their usage for passive home cooling.

Web page providing information on the types of cool roofs and their benefits to consumers.

Tool developed by LBNL to calculate potential savings from increasing wall and roof solar reflectance.

Report on experiments comparing the cooling and heating seasonal and peak demand performance of different variable-capacity air conditioning and heat pump units.

Study reporting the results of comparative testing of the effect of finished and unfinished metal roofing systems on cooling energy performance in a test facility.

DOE Energy Saver webpage summarizing the use of whole-house fans for cooling.

Report providing recommendations to builders regarding how to reduce cooling loads, use air-circulation fans, natural ventilation, window and building design for natural ventilation, and whole-house fans.

A fact sheet providing information on termite species and how to prevent them from entering into your home.

Report exploring alternative methods to find long-term solutions to energy loss in 1 ½-story homes to save energy, improve comfort, prevent frost buildup on the underside of the roof deck, and reduce the risk of ice dam formation/reformation.

Report describing the analytical study of renewable energy retrofits to homes built before 1980 and whether it is cost efficient or not.

Research study examining the opportunities for cost-effective energy efficiency and renewable energy retrofits in residential archetypes constructed before 1980 (Pre-Code) in 14 U.S. cities.

Report describing the monitored long-term performance of two solar domestic water heating systems in northern climates.

Technical bulletin addressing surfacing options in regards to composite wood panels and their emission barrier capabilities.

Webpage from FireSafe Marin explaining the different landscaping strategies near homes to lower the risk of a home's ignition from wildfire.

Fact sheet describing guidance for choosing appropriate materials and using proper construction practices when rebuilding, repairing, or renovating a home to increase its resistance to fires.

Standard describing prediction, mitigation, and reduction of moisture damage to the building envelope, materials, components, systems, and furnishings, depending on climate, construction type, and HVAC system operation; the webstore allows preview or full purchase.

Article describing strategies for reducing the risk of ice dam formation on roofs in winter.

Research study evaluating energy savings and cost effectiveness of installing low-emissivity (low-e) storm windows over existing windows in residential homes in all climate zones.

Article describing the importance of air sealing, insulation, and roof ventilation in reducing the likelihood of ice dam formation on roofs in cold snowy climates.

Webpage explaining what causes the formation of ice dams on roofs and steps to take to prevent them.

Article describing the causes of wood decay and moisture issues.

Article from Stephen L. Quarles on fire resistant decking design and materials recommendations.

Article describing codes and test methods related to fire-resistant construction of decks.

Guidance document on deep energy retrofits.

Part of a larger LBNL report (Deep Energy Retrofit Guidance for the Building America Solutions Center), the Design and Construction Process chapter provides detailed guidance for each process phase: pre-planning, planning, construction, test-out and post-occupancy.

Part of a larger LBNL report (Deep Energy Retrofit Guidance for the Building America Solutions Center), the Lessons Learned chapter focuses on successful deep energy retrofit projects throughout the U.S.

Part of a larger LBNL report (Deep Energy Retrofit Guidance for the Building America Solutions Center), the Occupant Behavior chapter discusses how to assess homeowner behavior patterns and use these patterns to enhance overall energy savings.

Part of a larger LBNL report (Deep Energy Retrofit Guidance for the Building America Solutions Center), the Over Time, Phased Guidance chapter presents a phased approach to deep energy retrofits.