Library

Research report describing study of interior and exterior air sealing techniques to stop ice dams in five 1.5-story retrofit homes conducted by the NorthernSTAR Building America Partnership team run by University of Minnesota.

Research study discussing how housewraps restrict or permit the passage of water molecules based on size, but cannot control the direction in which the water vapor molecules move.

Brochure providing information about flashing in all cimates.

Information sheet about soil gas control strategies for foundations.

Information sheet providing information about vapor management in building assemblies.

Information sheet providing details on the vapor permeance of different types of materials used in building assemblies.

Research study about key sustainability concepts, durability, energy efficiency and new flood resistant design.

This report will review, and summarize the current state of understanding and research into enclosures with higher thermal resistance, so-called “High-R Enclosures.” Recommendations are provided for further research.

Case study describing foundation wall moisture studies at a research facility in Minnesota run by Building America team NorthernSTAR.

Research study that utilizes EnergyPlus equipped with the moisture capacitance model to analyze the indoor relative humidity in three home types.

Research study examining the effective moisture penetration depth (EMPD) model and its suitability for building simulations.

Research study searching for combinations of existing technologies that could enable a minimally invasive, cost-competitive, easily deployable method of upgrading soil-side foundation insulation in existing buildings.

Case study describing novel technique for installing exterior spray foam on foundation walls that uses high-pressure water sprayer and a “hydro vac” to remove dirt along the foundation wall.

Expert Meeting about interior insulation retrofit of mass masonry wall assemblies held on July 30, 2011.

Research report assessing the moisture and cooling load impacts of airtightness and mechanical ventilation in homes in hot-humid climates.

Information sheet about groundwater control.

Research study presenting results of an existing home monitoring project designed to measure wall cavity moisture characteristics.

Report exploring four questions to determine the level of risk associated with adding drained exterior insulation to the exterior of an existing home during an energy retrofit.

Report presenting system design packages for cold and mixed-humid climates.

Report with guidance for installing windows with foam sheathing on wood-frame walls.

Article discussing indoor water management.

Report targeting the growing number of homes utilizing deep retrofit measures and new construction practices to realize sufficiently lower infiltration levels that require mechanical ventilation as prescribed by ASHRAE Standard 62.2.

Report documenting the measured performance of six residential ENERGY STAR vapor compression dehumidifiers.

Report focusing on managing the driving forces that move air and water vapor across the building envelope.

Document describing good practices for insulating basements in new and existing homes.

Measure Guideline research report providing simple, long term, and durable solutions when using tapes and flashing membranes in conjunction with the exterior face of rigid polymeric foam sheathing to create the drainage plane of a wall system.

Case study about how to properly tape insulating sheathing drainage planes.

Document providing information on basement insulation, air sealing and water management retrofits.

Report summarizing the importance of properly insulating and air sealing masonry walls, providing step by step instructions and approaches.

Report covering the fundamental waterproofing strategies for tub and shower assemblies.

Report describing the work conducted for high performance hybrid assemblies.

Report providing extensive guidance on controlling moisture in building envelopes through proper selection and installation on air, water, thermal, and vapor barriers.

Report about exterior sheathing insulation and inward driven moisture issues.

Report explaining moisture-related concerns for high R-value wall assemblies and discusses past Building America research work that informs this study.

Document describing a hygrothermal modeling study, including all of the US climate zones, a range of interior humidity levels and numerous arrangements and types of insulation.

Information sheet about mold mitigation.

Research report describing study of exterior retrofit approach for air sealing, insulating, and water management conducted by the NorthernSTAR Building America Partnership team run by University of Minnesota.

Case study describing the External Thermal and Moisture Management System developed by the NorthernSTAR Building America Partnership for retrofitting roofs with rigid foam over the roof deck, especially on one and a half-story homes.

Document with important building science considerations, designed for members of the residential construction and remodeling industries, as well as owners and managers who work in affordable housing.

Report describing steps homeowners can take to improve the indoor air quality in their home, including ventilating, preventing pests, and reducing pollutants in the home.

Information sheet designed for the residential construction and remodeling industries, as well as owners and managers working in affordable housing. This sheet presents building guidance for both new construction and rehabilitation, as well as practices that can be used by property maintenance...

Report describing a comparison of hydrothermal performances of DryRightTM fiberglass batts and kraft-faced fiberglass batts in a south facing wall assembly with a moisture storage cladding material.

Document describing issues of wind pressure resistance in walls with exterior rigid foam sheathing installed directly over framing members.

Article describing a research study exploring how effective interior insulation systems are at keeping basements dry and warm.

Article describing the evolution of the IRC to permit class 3 vapor retarders (latex paint) in walls coupled with exterior continuous insulation to allow drying and reduce condensation risk.

Case study about a structural sheathing product composed of enhanced EPS rigid foam with OSB adhered on one side.

Presentation describing the challenges of insulating an existing basement, presented to the Building America residential energy-efficiency stakeholder meeting.

Document providing guidance on water management concepts and applications for residential buildings.

Report summarizing current research, summarizes issues that have been experienced with current best practices, and recommends ways in which the best practices can be improved for water managing sheathings.

Fact sheet describing the requirements for EPA WaterSense certified kitchen faucets that highlights flow rate specifications, efficiency code standards, local requirements, faucet types and regulations for building and verifying a labeled faucet to ensure it meets the quality and water management...