Library

Report providing builders in marine climates with guidance for building homes that have whole-house energy savings of 40% over the Building America benchmark with no added overall costs for consumers.

Document describing three methods for elevating a home out of the flood zone.

Standard outlining industry procedure for sizing residential duct systems.

Standard covering equipment sizing loads for single-family-detached homes, small multi-unit structures, condo­miniums, town houses and manufactured homes.

Standard covering sizing strategies for all types of cooling and heating equipment, as well as how to use comprehensive manufacturer’s performance data on sensible, latent, or heating capacity for various operating conditions.

Document providing guideance and considerations for duct design in an energy efficient house.

View the APSP/ANSI Standards and codes below to get information about ANSI specifications for pools, spa and hot tubs.

This Best Practices Manual is the product of Hammer & Hand’s ongoing work to document and internally codify our standard operating procedures for construction practice.

Document providing guidance to U.S. home builders who want to accept the challenge.

Guide describing measures that builders in the cold and very cold climates can take to build homes that have whole-house energy savings of 40% over the Building America benchmark with no added overall costs for consumers.

Guidance document providing BA research teams and partners with specific information and approaches to identifying and overcoming potential barriers to Building America (BA) innovations arising in and/or stemming from codes, standards, and rating methods.

Report summarizing research results for the 30% energy savings level and demonstrates that lead builders can successfully provide 30% homes in the Marine Climate Region on a cost-neutral basis.

Document detailing how to build radon-resistant homes.

You can save energy and maintain a comfortable swimming pool temperature by using a smaller, higher efficiency pump and by operating it less.

Report outlining the steps developers can take to create high-performance standards on a community-wide scale.

Technical report detailing a study in which actual cooling loads are compared to modeled cooling loads.

Part of a larger LBNL report (Deep Energy Retrofit Guidance for the Building America Solutions Center), the Design and Construction Process chapter provides detailed guidance for each process phase: pre-planning, planning, construction, test-out and post-occupancy.

Part of a larger LBNL report (Deep Energy Retrofit Guidance for the Building America Solutions Center), the Lessons Learned chapter focuses on successful deep energy retrofit projects throughout the U.S.

Part of a larger LBNL report (Deep Energy Retrofit Guidance for the Building America Solutions Center), the Occupant Behavior chapter discusses how to assess homeowner behavior patterns and use these patterns to enhance overall energy savings.

Part of a larger LBNL report (Deep Energy Retrofit Guidance for the Building America Solutions Center), the Reducing costs and Increasing Cost-Effectiveness chapter provides suggestions for controlling deep retrofit costs, including both 'do's' and 'don'ts'.

Report identifying two barriers that limit the ability of builders to explore opportunities for higher levels of energy efficiency in housing: the use of duct system materials that inherently achieve airtightness and are right-sized for low-load houses, and, the ability to air seal fire separation...

Article describing a case study in which a whole-house battery and PV system was tested in a home with cooling and refrigeration during a hurricane in Florida.

Calculator to help homeowner's calculate the size of pool pump they need.

Guide by the Northeast Energy Efficiency Partnerships on how to size heat pumps in a cold climate.

Presentation about proper installation of flexible ducts.

Website providing information on low-energy and standard cooling systems, with a focus on saving energy.

Website blog with guidance about calculating heat-loss.

Article describing what evaporative coolers are, how they work, different types, performance, where they are appropriate, and how to install and maintain them.

Factsheet with information on energy efficient pool pumps.

Article describing the flashing of roofs and what to look for, targeted at home inspectors.

Report providing step-by-step instructions for heating contractors and hydronic designers for selecting the proper control settings to maximize system performance and improve response time when using a thermostat setback.

Research study showing that for a relatively small investment, a variable speed pool pump can reduce pool pump energy use by 50% to 75%.

Article describing mulching with lawn clippings.

Report discussing development of scopes of work and quality management for builders in mixed-humid climates.

Report investigating what motivates remodelers to become energy-focused and what technical knowledge that need to be energy-focused.

Table of criteria for pool pumps to achieve ENERGY STAR certification.

Calculator to help in calculating pool volume.

This CASE report proposes updates and revisions to the standards for residential swimming pool filtration pumps, new and replacement single phase pump motors under 5 horsepower (HP), controllers, portable electric spas as well as expanding the scope of the current standards to include light emitting...

Report presenting ways public housing authorities (PHAs) can develop packages of energy efficiency retrofit measures the PHAs can cost-effectively implement with their own staff in the normal course of housing operations at the time when units are refurbished between occupancies.

Report designed to help a builder understand quality management and its role in transitioning from conventional to HPH building and remodeling.

This report discusses proposed updates to the pool pumps and motors, and portable electric spas standards in the Appliance Efficiency Regulations (California Code of Regulations, Title 20, Sections 1601 to 1609). These proposed updates are part of the 2012 Appliance Efficiency Rulemaking, Phase I...

Information sheet describing how to select a properly sized water heater based on household usage patterns, peak demand, and heater type—whether tankless, solar, or storage-based—to ensure efficiency and adequate hot water supply.

A website providing information on how to properly size a water heater based on tank size, volume, peak hour demand and other factors.

Web page describing the basics of how to size and build a battery bank for electricity storage.

Manual describing the installation process for Craneboard insulated vinyl siding; while installation is similar across insulated vinyl siding products, see manufacturers for specific guidance.

Research study providing a comparison of selected retrofit activity typically done, versus that same retrofit activity approached from an integrated high performance remodeling and quality management perspective.

Article describing water leak detection and modes of testing (video camera inspection, hydrostatic pressure, electronic listening, isolation, and digital testing).

Users guide to help contractors and homeowners use the Cold Climate Heat Pump Sizing Support Tools developed by NEEP to size and select the best air source heat pumps for their cold climate location.

This text is one of series of supporting documents that provide guidance on implementing the World Health Organization (WHO) Guidelines for drinking-water quality; intended to support improvement of water safety within buildings.

Web page providing links or specifications for homes to be labeled through the U.S. Environmental Protection Agency’s (EPA’s) WaterSense program.