Library

Projectile missile testing of various wall panel configuration to understand how the different wall constructions would perform when struck with wind driven debris from a hurricane.

Article describing a field study that test ventilation performance in nine homes and found current ventilation was inadequate to remove PM2.5 and CO2 levels; however, a directly exhausting range hood can reduce peak PM2.5 concentrations by 75% or more.

Case study of new home construction in the hot-dry and mixed-dry climate zones.

Article describing the perfect wall and and in what order to control rain, air, vapor, and heat.

Article describing thermal bridging, construction practices that encourage thermal bridging, and solving thermal bridging through continuous exterior insulation.

Research study investigating the thermal efficiency of fasteners, namely drywall screws and siding nails, in high-performance wood-framed walls.

Report proposing a procedure for estimating the whole opaque wall R-value (whole-wall R-value), independent of system type and construction materials.

Article describing the evolution of the IRC to permit class 3 vapor retarders (latex paint) in walls coupled with exterior continuous insulation to allow drying and reduce condensation risk.

Research study describing a detailed 3D computational fluid dynamics model that evaluates the thermal performance of uninsulated wall assemblies.

Technical conference paper discussing real world experience with Trombe walls.

Technical fact sheet highlighting important building connections and illustrating the proper use of various types of connection hardware; also published in FEMA P-499 “Home Builder’s Guide to Coastal Construction: Technical Fact Sheet Series.”

Report about a project with successful integration of numerous energy-conservation and renewable-energy features into a beautiful, comfortable, and very energy-efficient off-grid home.

Report summarizing NRELs efforts to develop diagnostic test cases to conduct accurate energy simulations when phase change materials (PCMs) are modeled in residential buildings.

Publication with installation guidance for vinyl siding.

Document describing wall bracing techniques and suggestions for the city of Verona, WI building department.

A guide describing how to do wall bracing calculations and evaluations.

A presentation about the need for rainscreens including the damage water and moisture ingress into a home’s siding and framing can cause, and ways to design a resilient wall that drains and ventilates well.

An article written by Don Jackson of The Journal of Light Construction on how to detail brick veneer siding wall.

Web-based manual providing guidance for removal and preventing entry of nuisance wildlife.

A website explaining the connection between using compact fluorescent lightbulbs and the amount of mercury released into the environment.

Web page explaining what a cool exterior wall is and how they work, as well as benefits to their use and links to research studies.

An article describing a way to protect drain and ventilation holes in brick veneer siding against pests. Selecting a fine screen mesh opening (1/55-inch or 0.5-mm) is important to guard against small insects such as subterranean termites.

Article describing sustainable community development of near zero energy homes in Greenfield, Massachusetts.

Report describing the design and construction of a highly energy efficient community of ten duplexes in Greenfield, Massachusetts.

A hurricane retrofit guide describing techniques for strengthening roof-to-wall connections for family homes.