Library

Article from Washington Post on passive cooling measures for homes during extreme heat.

Article from The Earthbound Report on passive cooling design strategies for homes located in hot climates.

Website blog with guidance about calculating heat-loss.

Correcting pressure imbalances in your HVAC system can result in a healthier, more efficient home.

Study evaluating opportunities for reducing cooling energy use in a hot dry climate through the use of shading and window options.

Report describing the results of a 21-home field study investigating the effectiveness and failure rates of whole-house mechanical ventilation systems installed in Florida homes over the last 15 years.

Report describing research conducted to support California’s Title 24, Part 6 Building Energy Efficiency Standards by analyzing the impact of installation location and ventilation on heat pump water heater (HPWH) performance, emphasizing the need for proper installation to maximize efficiency...

Report using a field test plan to evaluate the success of implementing energy efficiency upgrades at the community scale incorporating whole-house systems integrated measures package (SIMP).

Book detailing passive cooling methods including airflow methods, evaporative cooling, and earth cooling.

Factsheet describing how to test the duct leakage of a manufactured home in the manufactured home factory.

Measure Guideline describing how to assess and carry out the isolation of natural draft combustion appliances from the conditioned spaces of low-rise residential buildings.

This measure guideline provides guidance on combustion safety inspection procedures for appliances and heating equipment that use indoor air for combustion and dilution of flue gases in low-rise residential buildings.

Repor ourlining testing results from a 53 home monitored sample, long-term energy use of electric resistance clothes dryers.

Report describing a lighting and smart power strip retrofit evaluation that was conducted on 56 all-electric, existing Florida homes to see how lighting and miscellaneous electric loads might be reduced.

Report describing an analysis method for determining optimal residential energy efficiency retrofit packages and applies the analysis method to a 1960s-era home in eight U.S. cities.

Standard that prescribes a testing method to determine the efficiency of space heating and/or cooling thermal distribution systems under seasonal and design conditions. This version of the standard was published in the year 2014, and is available for preview and purchase at the reference link. The...

Report about an experimental evaluation has been conducted on a night sky cooling system designed to substantially reduce space cooling needs in homes in North American climates.

Report describing the experimentally evaluated potential of a novel residential night cooling concept.

Document about development of a new test procedure to increase the quality and accuracy of energy analysis tools for the building retrofit market.

Article from Smarter Homes NZ on home building techniques that incorporate passive cooling.

Book describing passive cooling techniques from a technical and academic perspective.

Article from Williams College on the key elements of passive solar design for homes.

Paper summarizing passive and low-energy cooling systems for buildings.

Report presenting performance results from tests conducted on an energy efficiency retrofit project in Stockton, California.

Paper examining the monitored performance of four newly constructed near zero energy homes in Florida.

Report providing information on performance of mortars and concrete containing PCMs.

Report briefly reviewing past research on the effects of occupant behavior on residential energy use and then covering a two year pilot evaluation of a low cost residential energy feedback system installed in twenty case study homes in Florida.

Report briefly reviewing past research on the effects of occupant behavior on residential energy use and then covering a two year pilot evaluation of a low cost residential energy feedback system installed in twenty case study homes in Florida.

City of Plymouth webpage providing information on the Plymouth Community Center Project.

Report designed to help a builder understand quality management and its role in transitioning from conventional to HPH building and remodeling.

Data tables on U.S. renewable energy consumption and general trends in the market for renewable energy.

Paper covering a parametric study of foundation heat exchanger-based ground source heat pump systems for several house configurations in a range of European locations, with an emphasis on determining feasible combinations.

Report summarizing the results of laboratory testing of 20 advanced power strip products.

Report about a tool developed to enable users to compare a typical 1970s ranch home against an IECC 2009 code-compliant home of the same configuration and against the 70s base case plus retrofits.

Research report detailing Florida Solar Energy Center (FSEC) partnership with Manatee County Habitat for Humanity to design a compact, Zero Energy Ready Home in Florida, tackling challenges like equipment sizing and indoor air quality, offering insights for projects surpassing building code...

Report summarizing commissioning, short-term testing, and analysis that occurred before, during, and just after the actual retrofit of the Bay Ridge project.

Manual that identifies certain leakage limits for ducts and outlines procedures for testing ducts for conformity with air leakage limits that are set forth in a designer’s project specification.

Tool determining the most economical and efficient photovoltaic array location and position.

Document providing incident solar radiation data and window overhang sizing guidance for multiple locations across the U.S.

Handheld solar site analysis tool capturing whole-horizon images for a site and generating shading analysis reports.

Research study presenting a unique opportunity to both identify and evaluate deep retrofit measures that are practical and potentially cost effective for the retrofit market, as well as review the cost effectiveness of the Passive House design approach for achieving energy savings in deep retrofits.

Standard describing methods for testing the airtightness of buildings and HVAC equipment.

Test method designed to calculate an assigned air permeance of flexible sheet or rigid panel-type materials at a reference air pressure differential of 75 Pa which was published in the year 2021 and is available for preview and purchase at the reference link.

Test method providing a rapid means of determining the steady-state thermal transmission properties of thermal insulations and other materials with a high level of accuracy when the apparatus has been calibrated appropriately. This version of the standard was published in the year 2021 and is...

ASTM standard test method for surface burning response of different building materials which was published in the year 2022 and is available for preview and purchase at the reference link.

ASTM standard test method for testing the surface burning response of different building materials which was published in the year 2023 and is available for preview and purchase at the reference link.

Standard that describes the principles for the design of a hot box apparatus and the minimum requirements for the determination of steady state thermal performance of building assemblies when exposed to controlled laboratory conditions. The current version of the standard was published in 2019, and...

Test method designed to obtain reliable values for the WVTR of plastic film and sheeting which was published in the year 2020 and is available for preview and purchase at the reference link.

Report intending to provide useful information as the DOE/BA develops and implements comprehensive communications and outreach strategies for demonstration homes.