Library

Webpage providing guidance on the use of thermal mass with passive heating and cooling strategies.

Technical research paper explaining how thermal mass influences heating and cooling energy needs.

Design guide providing technical information regarding building with thermal mass.

Article detailing a case study in which thermal mass was used as part of an overall Net Zero solution for a university building.

Article from Purdue University on the potential for white paint technology to lower air conditioning usage requirements.

Factsheet providing design guidance for engineers describing how to characterize snow drifts on roofs in three dimensions rather than two, as anticipated in the 2022 edition of the standards, ASCE 7 - Minimum Design Loads and Associated Criteria for Buildings and Other Structures.

Fact sheet outlining best design and construction practices for tile roofing in high wind areas; also published in FEMA P-499 “Home Builder’s Guide to Coastal Construction: Technical Fact Sheet Series.”

Report presenting information that aids qualified architects and engineers in the identification of the best available refuge areas in existing buildings for sheltering in place during a tornado.

Technical conference paper discussing real world experience with Trombe walls.

Webpage from Southern California Earthquake Center (SCEC) on identifying key problem spots on unreinforced masonry chimneys and how to retrofit them to withstand seismic forces.

Report reviewing unvented roof assemblies, such as conditioned attics and unvented cathedral ceilings that are becoming common in North American construction.

Document summarizing the various papers on unvented conditioned cathedralized attics found on BSC's website.

Report covering wind uplift and roofing membrane failures.

Webpage describing the use of cool roofs to reduce heat islands and and benefits and costs.

Article describing a method for flashing roof vent boots, describing how to flash the pipe, how to flash over and under the pan, and finish by shaping the shingles, as well as addressing potential water leakage by adding an additional seal with EPDM flashing tape with a butyl adhesive backing to the...

Report describing the formation of icicles and ice dams along poorly ventilated roofs and how to mitigate ventilation issues with insulation and vents.

Report describing the use of attic ventilation to control moisture in cathedral roofs and avoid the formation of ice dams.

Guide providing information on controlling attic ductwork sweating.

Report covering the migration of wind-blown embers in roof vents.

Article describing how to weatherproof dormers using peel-and-stick membranes when flashing a dormer.

Report describing sloped roof assemblies with high levels of thermal performance.

Web page explaining what a cool roof is and how they work, as well as benefits to their use and links to research studies.

Webpage describing how different amounts and types of snow loads affect the structural integrity of roofs and homes.

Technical fact sheet describing proper operation, sizing, and installation of whole-house fans.

Article describing ways to design and construct a building to resist wildfires.

Study showcasing the location of the highest uplift force on the hip, ridge, and perimeter regions of roofs, and thus roofing material needs for the most fasteners and adhesive at these locations.

Study analyzing wind pressures on hip roofs where two hip roofs come together forming an L or T shaped roof or building.

Web article providing information on how to reduce solar gains through windows.

Fact sheet describing impact-resistant window systems with specifics on Florida’s building codes.

A hurricane retrofit guide describing techniques for strengthening roof-to-wall connections for family homes.

Report describing Net Zero house design with sloped roof assemblies.