Library

Research study presenting a unique opportunity to both identify and evaluate deep retrofit measures that are practical and potentially cost effective for the retrofit market, as well as review the cost effectiveness of the Passive House design approach for achieving energy savings in deep retrofits.

Standard describing methods for testing the airtightness of buildings and HVAC equipment.

Standard describing a simple, relatively cost-effective approach to evaluating the ability of a variety of materials to support microbial growth using a small chamber method. A preview of the standard is available at the link, with the full version available for purchase.

Specification describing criteria for manufactured polymeric materials used to provide a rainscreen function, a means for the drainage of liquid moisture and the ventilation of vapor moisture that enters an above-grade exterior wall assembly which was published in the year 2019, and is available for...

Test method designed to calculate an assigned air permeance of flexible sheet or rigid panel-type materials at a reference air pressure differential of 75 Pa which was published in the year 2021 and is available for preview and purchase at the reference link.

Test method providing a rapid means of determining the steady-state thermal transmission properties of thermal insulations and other materials with a high level of accuracy when the apparatus has been calibrated appropriately. This version of the standard was published in the year 2021 and is...

ASTM standard test method for surface burning response of different building materials which was published in the year 2022 and is available for preview and purchase at the reference link.

ASTM standard test method for testing the surface burning response of different building materials which was published in the year 2023 and is available for preview and purchase at the reference link.

Standard that describes the principles for the design of a hot box apparatus and the minimum requirements for the determination of steady state thermal performance of building assemblies when exposed to controlled laboratory conditions. The current version of the standard was published in 2019, and...

Test method designed to obtain reliable values for the WVTR of plastic film and sheeting which was published in the year 2020 and is available for preview and purchase at the reference link.

Report intending to provide useful information as the DOE/BA develops and implements comprehensive communications and outreach strategies for demonstration homes.

Report evaluating a test home built in Atlanta, GA in the mixed-humid climate zone. The report outlines the features of the house, discusses the implementation of the energy efficient design, and presents the results of short-term characterization testing.

Document about NREL's repository of residential building characteristics and historical energy use data, used to improve accuracy of residential energy analysis tools.

Fact sheet describing water management in a residential building.

Report using data from various sources to characterize the impact on human health and property damage from indoor environmental quality and other hazards.

FSEC certification and testing page for solar systems.

Report proposing a procedure for estimating the whole opaque wall R-value (whole-wall R-value), independent of system type and construction materials.

Article describing the evolution of the IRC to permit class 3 vapor retarders (latex paint) in walls coupled with exterior continuous insulation to allow drying and reduce condensation risk.

Report addressing the ever increasing percentage of whole house energy use that is attributable to miscellaneous electricity loads (MELs) and major appliances.

Guide providing information on controlling attic ductwork sweating.

Document describing the measured annual performance data from 12 recent-vintage very low energy homes in the US.

A presentation about the need for rainscreens including the damage water and moisture ingress into a home’s siding and framing can cause, and ways to design a resilient wall that drains and ventilates well.

Resource that provides a checklist of program criteria for water-efficient new homes under the U.S. Environmental Protection Agency’s (EPA’s) WaterSense program.

An article written by Don Jackson of The Journal of Light Construction on how to detail brick veneer siding wall.

Report assessing the performance and cost-effectiveness of a zero net energy community project in Davis, CA.

Factsheet describing the importance of system charging, superheat and subcooling.

Research study describing an evaluation of selected windows undertaken by IRC researchers at Ottawa’s Laurier House (now being used as a museum) to determine their effectiveness in controlling condensation.