Library

Journal article detailing laboratory and simulation studies quantifying the impact that heat pump and air conditioner installation faults have on system capacity and efficiency.

Guide detailing best practices on how to build wall assemblies with absorptive claddings such as brick, stone that drain and dry well.

Report discussing the importance of durability and energy efficiency in building construction.

Article describing walls and moisture development on them.

Report using a field test plan to evaluate the success of implementing energy efficiency upgrades at the community scale incorporating whole-house systems integrated measures package (SIMP).

Webpage featuring hundreds of illustrations of masonry construction details for brick, congrete, stone, tile, stucco, etc.

Siding installation guide for Ply Gem Siding Group products.

Report describing an analysis method for determining optimal residential energy efficiency retrofit packages and applies the analysis method to a 1960s-era home in eight U.S. cities.

Fact sheet describing how typical wall moisture barrier systems work, the moisture barrier system and common problems associated with them; also published in FEMA P-499 “Home Builder’s Guide to Coastal Construction: Technical Fact Sheet Series.”

Article describing how moisture accumulates inside of structures and issues that result.

Report providing extensive guidance on controlling moisture in building envelopes through proper selection and installation on air, water, thermal, and vapor barriers.

Practical guide describing the management of moisture during a building's design, construction and maintenance.

EPA guidance document providing information on moisture control in buildings.

Article discussing moisture control in buildings as well as building design and construction strategies for keeping buildings dry and allowing buildings to dry out if they do get wet.

The next generation of building enclosures is a key step toward achieving high-performance goals through decreasing energy load demand and enabling advanced space-conditioning systems. Yet the adoption of high-R enclosures and particularly high-R walls has been a slow-growing trend because...

Website providing guidance about mold and moisture for homes, schools, multifamily and commercial buildings.

Online course providing an overview of mold prevention and mold remediation.

Report on a study monitoring moisture conditions of double-stud wall assemblies with different insulation in Devens, Massachusetts.

Article describing mulch requirements and benefits.

Report discussing development of scopes of work and quality management for builders in mixed-humid climates.

Information sheet about the National Residential Efficiency Measures Database, a public database that characterizes the performance and costs of common residential energy efficiency measures.

Report investigating what motivates remodelers to become energy-focused and what technical knowledge that need to be energy-focused.

Building science insight into crawlspaces.

Report briefly reviewing past research on the effects of occupant behavior on residential energy use and then covering a two year pilot evaluation of a low cost residential energy feedback system installed in twenty case study homes in Florida.

Research study identifying best practices of three successful high performance, custom home builders in the upper Midwest.

Fact sheet from Wisconsin Focus on Energy explaining how to prevent future ice dams on homes by learning about their formation and mitigation of contributing factors.

List of recommendations from IBHS on how to protect homes from ice dam formation.

Document outlining the approach to quality assurance in the construction process as recommended by Building Science Corporation for new residential construction.

Report designed to help a builder understand quality management and its role in transitioning from conventional to HPH building and remodeling.

Webpage describing the Quality Install Tool, an open-source web app designed to simplify, standardize, and expedite the creation of high-quality installation documentation for HVAC installations and efficiency upgrades.

An example of a form a building codes department created to ensure builders are fully aware and have taken steps to provide drainage so that water doesn’t accumulate behind siding. This example is from the city of Newberg, Oregon.

Article describing moisture and ice dam issues in attics and how to air seal the attic floor.

Document containing some of the basic characteristics for energy performance, durability, thermal comfort, and indoor air quality that should be met in all high performance homes.

U.S. DOE report summarizing findings from literature and research relevant to HVAC installation practices.

Report describing research efforts focused on examining the audit reports for quality, comprehensiveness, and consistency.

Fact sheet describing methods for flashing and air-sealing windows and doors.

Report about a tool developed to enable users to compare a typical 1970s ranch home against an IECC 2009 code-compliant home of the same configuration and against the 70s base case plus retrofits.

Information sheet describing solar PV upgrade for an existing homes.

Information sheet describing tankless hot water heating systems in existing homes.

Information sheet describing solar hot water systems in existing homes.

Information sheet about envelope and roof moisture control retrofit for a home.

Report from FEMA describing techniques for floodproofing structures.

Technical study exploring the impact of different installation faults on heat pump performance in a single-family house.

Report summarizing commissioning, short-term testing, and analysis that occurred before, during, and just after the actual retrofit of the Bay Ridge project.

Paper describing the development and testing of an affordable net-zero energy house in Lenoir City, Tennessee.

Webpage describing the STEP campaign encouraging the use of smart diagnostic tools to reduce installation faults.

Research study presenting a unique opportunity to both identify and evaluate deep retrofit measures that are practical and potentially cost effective for the retrofit market, as well as review the cost effectiveness of the Passive House design approach for achieving energy savings in deep retrofits.

Standard describing a simple, relatively cost-effective approach to evaluating the ability of a variety of materials to support microbial growth using a small chamber method. A preview of the standard is available at the link, with the full version available for purchase.

Specification describing criteria for manufactured polymeric materials used to provide a rainscreen function, a means for the drainage of liquid moisture and the ventilation of vapor moisture that enters an above-grade exterior wall assembly which was published in the year 2019, and is available for...

Document identifying differences between the requirements for construction documents for high performance housing and the documents that are typically produced for conventional housing.