Library

Fact sheet describing a report providing best practices for reducing damages from floods to manufactured homes.

2015 edition of code for commercial buildings that brings together all structural, plumbing, mechanical, fuel gas, energy and electrical provisions for all buildings except detached one- and two-family residences and townhouses up to three stories.

Fact sheet providing an overview of FEMA P-348, Protecting Building Utility Systems From Flood Damage.

Document describing portions of the flood provisions from the 2018 editions of the IBC, IRC, IEBC, IMC, IPC, IFGC, IFC, ISPSC, IPSDC, and ICC Performance Code.

Catalog describing FEMA preparedness seminars from 2021 including preparedness and natural hazards topics.

Guidance document from the UN environment programme on climate-resilient buildings and communities practices, including guidance on heat waves, drought, hurricanes, and flooding.

Document describing three methods for elevating a home out of the flood zone.

Report providing guidance on wet floodproofing crawlspaces, unfinished basements, and garages.

Report providing guidance to homeowners and business owners on protecting crawlspaces from flood damage.

Technical report describing the SPS (Structural Panel System), an innovative implementation of the "perfect wall" concept, situating environmental control layers on the exterior side of structural components for improved constructability, cost-effectiveness, and performance, validated through the...

Report describing the experience gained from AIA’s Disaster Assistance Program with first-hand accounts of disaster response and recovery, case studies and other best practices, including approaches to designing buildings to be more adaptable to uncertainty.

Web-based mapping tool offering a fast, reliable way to look up key design parameters specified in Standard ASCE 7-10, 7-16, or 7-22 for a specific address or location which is free to use and can look up data for eight different environmental hazard types: wind, tornado, seismic, ice, rain, flood...

Article by the Canadian Government on attic ventilation and considerations for moisture and ice dams.

Report covering interior energy retrofits of masonry buildings.

Document focusing on the design and wall components that contribute to a pressure equalized rain screen wall, including the frequency of the weep holes and other brick masonry rain screen wall requirements.

Web based tool providing decision-making guidance for selecting wall assembly components.

Article describing the principle of capillarity in construction materials.

Article describing how closed crawlspaces can do "double duty" by controlling moisture and providing energy savings.

Fact sheet describing the characteristics that make for a successful coastal residential building, including design and construction recommendations; also published in FEMA P-499 “Home Builder’s Guide to Coastal Construction: Technical Fact Sheet Series.”

Report describing retrofitting options and methodology for architects, developers, and property owners to use when making decisions about retrofits for common building types in NY.

Report providing tools and resources to help community planners to improve coastal resilience.

Article summarizing the IBHS stance on building practices that can mitigate the impact of high winds and storm surge on structures.

Fact sheet describing what builders need to know about designing a structure for flood loads.

Guidance from Zero Energy Project on construction techniques for warmer climates, such as home orientation, and insulation requirements.

Article about how mortar droppings during the installation of a brick veneer can clog the weep holes in the wall assembly causing moisture damage. The article also illustrates products that can be installed in the ventilated cavity to mitigate this problem.

The Guide addresses walls constructed with 2x4 wood frame studs, wood structural panel (WSP) sheathing as wall bracing and added backing for foam sheathing, a layer of rigid foam sheathing insulation up to 1.5 in. thick over the WSP, and a cladding system installed over the foam sheathing in low...

Report covering exterior energy retrofits of masonry buildings.

Report providing guidance on designing buildings to be flood resistant.

Report providing information on ways to incentivize funding of hazard mitigation programs.

Website helping communities address coastal issues with data, tools, and training resources.

Guidelines from PG&E outlining how to stay safe during a flood event by shutting off natural gas and electric service to the home.

Factsheet describing methods for securing HVAC units to avoid damage during an earthquake.

A map describing the average temperature of shallow groundwater in Fahrenheit across the continental United States.

Website that lists references that can help you determine how to control you indoor air quality while combating an emergency.

Comprehensive design guide describing the benefits and details of retrofit methods for buildings and equipment in flood-prone areas. Estimated costs are outdated due to publication date.

Report describing the research gap in the connection between resilience and energy efficiency.

Guidance documents describing Erosion Control Blankets (ECBs) use as a construction material that provides temporary cover and support for establishing vegetation on bare soil. ECB holds topsoil and seed (typically grass) in place to minimize erosion during germination of seed.

Flyer from the City of Ellensburg WA describing what an excess flow valve is, how they work, and associated costs.

Utility webpage describing the monetary costs associated with excess flow valves for TECO in Florida.

Report that demonstrates the durability, constructability, and cost-effectiveness of the extended plate and beam (EP&B) wall system for new construction housing projects in compliance with the International Energy Conservation Code, addressing moisture risk management and high-performance envelope...

Factsheet for home and business owners describing ways to anchor fuel tanks to avoid displacement in floods.

Fact sheet describing how to prepare for hurricane season and mitigate damage from floods and high winds.

Summary document describing flood resistant building materials and some tips for building flood resistant walls.

Factsheet describing the flood-resistant provisions of the 2021 International Codes and American Society of Civil Engineers (ASCE) 24-14, Flood Resistant Design and Construction, that are “higher standards” and that are more specific than the National Flood Insurance Program (NFIP) requirements.

FEMA document defining key coastal and flood hazard terms.

Document describing commonly used terms in the context of levees and what they mean.

Documents describing the similarities and differences between the National Flood Insurance Program (NFIP) minimum requirements and the requirements of the International Codes® (I-Codes®) and ASCE 24, Flood Resistant Design and Construction, a standard referenced by the I-Codes., and illustrating...

Online geospatial map with interactive viewer showing flood risk areas and base flood elevations

Website describing the national flood insurance program and how to purchase flood insurance.

A address searchable geographic information system for visualizing the flood hazard of an address and its surrounding area.