Library

Report analyzing design heating load sizing methods for superinsulated homes in cold climates and comparing them to the actual energy usage to determine if the building load calculation methodology should be changed for calculating the design heating load of these homes.

Report on the stability of furring strips as a means for cladding attachment over walls with thick exterior rigid insulation.

Research study investigating the energy performance and cost effectiveness of several state-of-the-art retrofit strategies that could be used in residential houses in the Boston and New England area.

Report on a simplified test procedure for combustion safety that is easier to implement and should produce fewer false positives than the previous procedure.

Part I of the Guide addresses walls constructed with 2x6 wood frame studs, wood structural panel (WSP) sheathing as exterior sheathing, gypsum board as interior sheathing, and a cladding system installed over WSP sheathing in low-rise residential buildings up to three stories in height. Walls with...

The Guide addresses walls constructed with 2x4 wood frame studs, wood structural panel sheathing (WSP) as wall bracing and added backing for foam sheathing, a layer of rigid foam sheathing insulation up to 1.5 inches thick over the WSP, and a cladding system installed over the foam sheathing in low...

Part I of the Guide addresses walls constructed with 2x6 wood frame studs, wood structural panel (WSP) sheathing as exterior sheathing, gypsum board as interior sheathing, and a cladding system installed over WSP sheathing in low-rise residential buildings up to three stories in height.

Report focusing on building envelopes that have been enhanced with phase change materials (PCMs), which can simultaneously reduce total cooling loads and shift peak-hour loads.

Job Process sheet for the manufactured housing industry showing how to cut insulation batts to fit wall cavities in a factory production environment.

Guidance document on deep energy retrofits.

Part of a larger LBNL report (Deep Energy Retrofit Guidance for the Building America Solutions Center), the Source Energy and Carbon Decisions chapter helps users carefully assess the impacts of switching from gas to electricity for heating end-uses, using source energy and/or carbon emissions...

Report describing research that helps inform best practices for air-sealing multifamily buildings in the Northeast.

Report on the field evaluation of whole-building approaches and estimation of the relative contributions of select technologies toward reducing energy use related to space conditioning in new manufactured homes.

Research report assessing the moisture and cooling load impacts of airtightness and mechanical ventilation in homes in hot-humid climates.

Report providing the results of an analysis of humidity control and variable refrigerant flow (VRF) system efficiency in three new multifamily buildings in New York, NY.

Research study describing field testing performed in 32 two-story Florida homes to characterize wind washing failures of the house air and thermal boundary.

Report on the long-term performance of mini-split heat pumps.

Report providing step-by-step instructions for heating contractors and hydronic designers for selecting the proper control settings to maximize system performance and improve response time when using a thermostat setback.

Guide describing proper application, design, and installation of mechanical ventilation cooling systems for homes located in hot-dry and cold-dry climates, as well as a means of understanding the benefits, costs, and tradeoffs of these systems.

Report providing extensive guidance on controlling moisture in building envelopes through proper selection and installation on air, water, thermal, and vapor barriers.

The next generation of building enclosures is a key step toward achieving high-performance goals through decreasing energy load demand and enabling advanced space-conditioning systems. Yet the adoption of high-R enclosures and particularly high-R walls has been a slow-growing trend because...

Report highlighting the evaluation methods used and extent of wind washing found in a study analyzing wind washing in thirty-two two-story homes.

Research project aimed to verify whether homes in the New Jersey HPwES program achieved 30% source energy savings, and if so, what measures were implemented to achieve them.

Report evaluating mechanical AC precooling strategies in homes as a method for improving the load factor by shifting cooling operation from on-peak to off-peak hours.

Report on a project conducted to better understand the current usage of thermostatic radiator valves by key market players in steam and hot water heating and to conduct limited experiments on the effectiveness of new and old thermostatic radiator valves as a means of controlling space temperatures...

Fact sheet describing the results of an analysis of humidity control and variable refrigerant flow (VRF) system efficiency in three new multifamily buildings in New York, NY.

Factsheet describing the importance of system charging, superheat and subcooling.