Library

A builder's guide describing hurricane-resistant reinforcements for gable ends.

Guide describing how and where to install flashings in order to weatherproof a roof.

Article describing the fundamentals and basics of glazing hazard mitigation practices for both new and existing buildings.

IRC guide referencing wood truss bracing best practices and requirements.

Report describing tsunamis and options for vertical evacuation from tsunamis; the guide addresses determination of tsunami and earthquake loads and structural design criteria and concepts, primarily for commercial buildings.

Guide describing the requirements by FORTIFIED Home™ for improving the home's resistance to high wind and hail.

Report presenting seismic design and construction guidance for one- and two-family houses for homebuilders, knowledgeable homeowners, and other non-engineers.

A starting point for ballparking and comparing the cost of different siding materials and a brief overview of the pros and cons of different siding materials.

Report presenting construction methods, building products, appliances and equipment of four single-family houses that achieve dramatic energy reductions and approach “net zero energy” use.

Article describing how omission of two small but critical wall details, a kick-out flashing and a weep screed, lead to extensive water damage to a wall.

Factsheet describing proper methods for installing vinyl siding and soffit coverings in high wind and coastal areas.

Factsheet describing tips for building or renovating with a focus on disaster resistance.

Report providing the results of an analysis of humidity control and variable refrigerant flow (VRF) system efficiency in three new multifamily buildings in New York, NY.

Report by the FEMA Mitigation Assessment Team on damages due to Hurricane Irma which struck Florida in September 2017, and recommendations for construction for future disaster resistance and preparedness.

Article presenting the 2008 update on the 2006 details on when required hurricane mitigation retrofits are required and the cost cap on required hurricane mitigation retrofits.

Code describing the requirements for existing site-built single-family homes to receive roof-to-wall retrofits when re-roofing.

Webpage containing a library of ready-to-use social media posts, graphics and video links that promote life-saving information about how individuals and families can prepare for and survive during a hurricane.

A document aimed at reducing the vulnerability of a gable end roof to wind damage in a hurricane.

Report describing the hurricane retrofit guide with focus on walls and wooded framed walls.

NOAA webpage providing images and short descriptions of different types of hurricane shutters.

Website detailing how to prepare for, stay safe during, and return home after hurricanes.

A news article documenting the milestone of the FORTIFED homes program surpassing 18,000 homes.

ICC-ES Evaluation Report reviewing proprietary steel shear wall panels developed by Simpson Strong-Tie Company to resist vertical and lateral loads in walls resulting from wind or earthquakes.

An impact test report from projectile missile tests against brick veneer, verifying that brick veneers perform well to resisting hurricane force wind driven debris.

Case study describing Alachua County, Florida’s, green infrastructure strategy for land use development that incorporates rain gardens, ponds, swales, and native vegetation to manage stormwater.

Indoor airPLUS is a voluntary partnership and labeling program that helps new home builders improve the quality of indoor air by requiring construction practices and product specifications that minimize exposure to airborne pollutants and contaminants.

This document covers how broken windows can allow wind and rain inside the house and even lead to roof failure.

Article describing the insurance savings of a home with a hip roof versus a gable roof from the perspective of an insurance advisor.

Article describing how the configuration of surrounding buildings affects the wind loads on a hip roof in a low-rise building.

Website providing a probabilistic map of the expected number of damaging earthquakes around the U.S.

Article describing dozens of ideas on how to retrofit a home so it is more earthquake ready.

Guide describing tools for island and hurricane-prone communities on redevelopment and rehabilitation of homes to prepare for future natural disasters.

A publication describing how to protect coastal investments by adapting to natural processes and protecting coastal environments and shorelines.

Factsheet describing the concept of load paths and the important connections in a wind uplift load path; also published in FEMA P-499 “Home Builder’s Guide to Coastal Construction: Technical Fact Sheet Series.”

Report on whole-house and spot ventilation strategies for improved indoor air quality.

Guide describing sound mitigation measures to lower building natural disaster vulnerability to assist local officials and community decision makers in coastal areas.

Report on the long-term performance of mini-split heat pumps.

Web article describing many ways homeowners, contractors, and builders can make homes more resistant to hurricanes, tornadoes, high winds, floods, and hail.

Report providing step-by-step instructions for heating contractors and hydronic designers for selecting the proper control settings to maximize system performance and improve response time when using a thermostat setback.

Guide describing proper application, design, and installation of mechanical ventilation cooling systems for homes located in hot-dry and cold-dry climates, as well as a means of understanding the benefits, costs, and tradeoffs of these systems.

Web resource that lays out the pre-work considerations, methods and finishes for installing mechanical insulation.

A presentation describing the standards regarding who is responsible for what part of the design to ensure the roof truss is properly designed and braced.

A Recovery Advisory guide reccomending practices for designing and installing metal roof systems that will enhance wind resistance in high-wind regions (i.e., greater than 90-miles per hour [mph] gust design wind speed).

Standard using performance-based principles to determine dead, live, soil, flood, tsunami, snow, rain, atmospheric ice, earthquake, wind, and fire loads, and their combinations for general structural design. This version of the standard was published in the year 2016 and is available in both digital...

Standard using performance-based principles to determine dead, live, soil, flood, tsunami, snow, rain, atmospheric ice, seismic, and wind loads, and their combinations for general structural design. The current version of this standard was published in the year 2022 and is available in both digital...

Standard using performance-based principles to determine dead, live, soil, flood, snow, rain, atmospheric ice, earthquake, and wind loads, and their combinations for general structural design. This version of the standard was published in the year 2010 and is available in both digital and print...

FEMA mitigation assessment team report following Hurricane Charley in Florida including observations, recommendations, and technical guidance for retrofitting hurricane-damaged homes.

FEMA Mitigation Assessment Team Report describing damages from Hurricane Michael in Florida in Oct. 2018 and recommendations for future hurricane preparedness.

Report providing a resource that communities can use to identify and evaluate a range of potential mitigation actions for reducing risk to natural hazards and disasters.